[Fri Aug 24 10:13:21 2012] Detection parameters:
  Position = (163.5, 301.3) = 8 9 32.79 39 50 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.9 +/- 6.6
  Background counts = 4.1
  Rate = 0.003 +/- 0.001

[Fri Aug 24 10:13:21 2012] Off-axis axis estimate = 9.79'
[Fri Aug 24 11:33:00 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 11:33:00 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Fri Aug 24 11:33:00 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.091
[Fri Aug 24 11:33:00 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.32"
[Fri Aug 24 11:54:26 2012] fullrun_mos2_xmm0553790101_pi300-10000_cl_pass0_src9.ximg exists
[Fri Aug 24 11:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553790101_pi300-10000_cl_pass0_src9.csv
[Fri Aug 24 11:54:26 2012] fullrun_mos2_xmm0553790101_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Aug 24 11:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553790101_pi300-10000_cl_pass0_src9.csv
[Fri Aug 24 11:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553790101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553790101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 11:54:26 2012] fullrun_mos2_xmm0553790101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Aug 24 11:54:26 2012] fullrun_mos2_xmm0553790101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Aug 24 11:54:26 2012] Fit fullrun_mos2_xmm0553790101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Aug 24 11:54:35 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.377394 pixels away
[Fri Aug 24 11:54:35 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 11:54:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 11:54:35 2012] Assessing source extent using major
[Fri Aug 24 11:54:35 2012] Source does appear to be extended
[Fri Aug 24 11:54:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 12:54:13 2012] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 12:54:13 2012] Initial guess for spatial extent in simple fitting = 11.32"
[Fri Aug 24 12:54:13 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.091
[Fri Aug 24 12:54:13 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 11.32"
[Fri Aug 24 13:14:03 2012] fullrun_mos2_xmm0553790101_pi300-10000_cl_pass1_src8.ximg exists
[Fri Aug 24 13:14:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553790101_pi300-10000_cl_pass1_src8.csv
[Fri Aug 24 13:14:03 2012] fullrun_mos2_xmm0553790101_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Aug 24 13:14:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553790101_pi300-10000_cl_pass1_src8.csv
[Fri Aug 24 13:14:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553790101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553790101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 13:14:03 2012] fullrun_mos2_xmm0553790101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Aug 24 13:14:03 2012] fullrun_mos2_xmm0553790101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Aug 24 13:14:03 2012] Fit fullrun_mos2_xmm0553790101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Aug 24 13:14:13 2012] Spatial fit model total counts = 68.021300, observed total counts = 69.000000
[Fri Aug 24 13:14:13 2012] Offset between fit and detection position for source 9 = 2.094567 pixels
[Fri Aug 24 13:14:13 2012] 70.045200 total counts/ 21.794900 bgd. counts: snr = 10.335288
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.094567 pixels
  Position = (162.4, 299.5) = 8 9 33.18 39 50 34.4
  Extent = 14.8 (4.7-22.6)", rotation angle = 0
  Source counts = 48.3 +/- 8.4
  Background counts = 21.8
  Rate = 0.004 +/- 0.0007
[Fri Aug 24 13:14:14 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 13:14:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 13:14:14 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 13:14:14 2012] Source does appear to be extended
[Fri Aug 24 13:14:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 13:29:49 2012] XMMSAS src. selection expression = ellipse(14084.302200, 26008.372000, 890.478026, 890.478026, 0.000000, X, Y)
[Fri Aug 24 13:29:49 2012] Writing source region out to fullrun_mos2_xmm0553790101_pi300-10000_pass1_cl_src9_src.reg
[Fri Aug 24 13:29:49 2012] Extracting stamp from image fullrun_mos2_xmm0553790101_pi300-10000_cl_sm2.00.img.gz, (111, 248) - (214, 351)
[Fri Aug 24 13:29:49 2012] XMMSAS bgd. selection expression = annulus(14084.302200, 26008.372000, 1484.130043, 2968.260085, X, Y)
[Fri Aug 24 13:29:49 2012] Writing fullrun_mos2_xmm0553790101_pi300-10000_pass1_cl_src9.gif
[Fri Aug 24 13:31:36 2012] Mean detx,y = (-9996.92, -5317.75) 
[Fri Aug 24 13:31:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 24 13:32:01 2012] grppha failed
[Fri Aug 24 13:32:01 2012] Setting source spectrum file to fullrun_mos2_xmm0553790101_pi300-10000_pass1_cl_src9_src.pi.gz
[Fri Aug 24 13:32:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553790101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Aug 24 13:33:27 2012] Not generating rmf since there are only 48 counts
[Fri Aug 24 13:33:27 2012] rmf not generated due to insufficient counts
[Fri Aug 24 13:33:46 2012] Updating aperture counts using extracted products
[Fri Aug 24 13:33:46 2012] Error reading totcts from fullrun_mos2_xmm0553790101_pi300-10000_pass1_cl_src9_src.pi.gz
[Fri Aug 24 13:33:46 2012] No arf file for this source, not re-computing flux
[Fri Aug 24 13:33:48 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 24 13:33:49 2012] xmm0553790101/analysis//spectral/fullrun_mos2_xmm0553790101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete