[Sat Jun 15 03:53:51 2013] Detection parameters:
  Position = (265.5, 154.0) = 16 15 22.41 -28 46 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.6 +/- 18.4
  Background counts = 181.0
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 03:53:51 2013] Off-axis axis estimate = 10.74'
[Sat Jun 15 03:54:17 2013] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:17 2013] Initial guess for spatial extent in simple fitting = 11.80"
[Sat Jun 15 03:54:17 2013] source mask rpix=2.7, npix_max = 41, mask sum = 33, frac = 0.799
[Sat Jun 15 03:54:17 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 11.80"
[Sat Jun 15 03:54:18 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src44.ximg exists
[Sat Jun 15 03:54:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src44.csv
[Sat Jun 15 03:54:18 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src44_1.ximg exists
[Sat Jun 15 03:54:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src44.csv
[Sat Jun 15 03:54:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:19 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sat Jun 15 03:54:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sat Jun 15 03:54:19 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sat Jun 15 03:54:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sat Jun 15 03:54:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:32 2013] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 15.371558 pixels away
[Sat Jun 15 03:54:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:32 2013] Assessing source extent using major
[Sat Jun 15 03:54:32 2013] Source does appear to be extended
[Sat Jun 15 03:54:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:54:49 2013] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:49 2013] Initial guess for spatial extent in simple fitting = 11.80"
[Sat Jun 15 03:54:49 2013] source mask rpix=2.7, npix_max = 41, mask sum = 33, frac = 0.799
[Sat Jun 15 03:54:49 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 11.80"
[Sat Jun 15 03:54:51 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src41.ximg exists
[Sat Jun 15 03:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src41.csv
[Sat Jun 15 03:54:51 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Jun 15 03:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src41.csv
[Sat Jun 15 03:54:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:51 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Jun 15 03:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat Jun 15 03:54:51 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Jun 15 03:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Sat Jun 15 03:54:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:55:04 2013] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 14.446174 pixels away
[Sat Jun 15 03:55:04 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:55:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:55:04 2013] Assessing source extent using major
[Sat Jun 15 03:55:04 2013] Source does appear to be extended
[Sat Jun 15 03:55:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:55:19 2013] XMMSAS src. selection expression = ellipse(23047.421967, 13346.827713, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 03:55:19 2013] Not overwriting source region fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_src.reg
[Sat Jun 15 03:55:19 2013] Extracting stamp from image fullrun_pn_xmm0553720101_pi300-10000_cl_sm2.00.img.gz, (228, 116) - (303, 191)
[Sat Jun 15 03:55:19 2013] XMMSAS bgd. selection expression = annulus(23047.421967, 13346.827713, 1087.500000, 2175.000000, X, Y)
[Sat Jun 15 03:55:19 2013] Writing fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46.gif
[Sat Jun 15 03:55:30 2013] ../../xmm0553720101/products/events/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_src.evt and ../../xmm0553720101/products/events/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_bgd.evt exist, delete to re-create
[Sat Jun 15 03:55:30 2013] Mean detx,y = (3639.17, -10582.73) 
[Sat Jun 15 03:55:30 2013] ../../xmm0553720101/products/images/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_src.img and ../../xmm0553720101/products/images/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_bgd.img exist, delete to re-create
[Sat Jun 15 03:55:30 2013] ../../xmm0553720101/products/spectra/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_src_b10.pi.gz and ../../xmm0553720101/products/spectra/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_bgd.pi exist, delete to re-create
[Sat Jun 15 03:55:30 2013] Setting source spectrum file to fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Jun 15 03:55:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sat Jun 15 03:55:30 2013] ../../xmm0553720101/products/lightcurves/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_src.lc and ../../xmm0553720101/products/lightcurves/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_bgd.lc exist, delete to re-create
[Sat Jun 15 03:55:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 03:55:40 2013] rmf not generated due to insufficient counts
[Sat Jun 15 03:55:40 2013] fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46.arf exists, delete to re-create
[Sat Jun 15 04:02:29 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:02:29 2013] Total counts from fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 534.00
[Sat Jun 15 04:02:29 2013] Total counts from fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_bgd.pi.gz = 5314.00
[Sat Jun 15 04:02:29 2013] Got source and background scale factors 1047765.000000, 10381983.000000
[Sat Jun 15 04:02:29 2013] User source parameters:
  Position = (265.5, 154.0) = 16 15 22.41 -28 46 26.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -2.3 +/- 24.1
  Background aperture counts = 536.3
  Rate = -5e-05 +/- 0.0006

[Sat Jun 15 04:02:29 2013] Updating counts from extracted products
[Sat Jun 15 04:02:29 2013] Set source signif. to -2.30/23.16 = -0.10
[Sat Jun 15 04:02:31 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 04:02:31 2013] Using photon index=1.80, rate=-5.43e-05, arf fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46.arf
[Sat Jun 15 04:02:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 04:02:31 2013] Updated flux is not positive, keeping original flux
[Sat Jun 15 04:02:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 04:02:58 2013] xmm0553720101/analysis//spectral/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete