[Sat Jun 15 03:53:50 2013] Detection parameters:
  Position = (305.0, 326.7) = 16 15 9.35 -28 33 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 482.4 +/- 30.6
  Background counts = 214.2
  Rate = 0.02 +/- 0.001

[Sat Jun 15 03:53:51 2013] Off-axis axis estimate = 2.11'
[Sat Jun 15 03:54:17 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:17 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Sat Jun 15 03:54:17 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.609
[Sat Jun 15 03:54:17 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 7.48"
[Sat Jun 15 03:54:18 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src30.ximg exists
[Sat Jun 15 03:54:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src30.csv
[Sat Jun 15 03:54:18 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat Jun 15 03:54:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src30.csv
[Sat Jun 15 03:54:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:19 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat Jun 15 03:54:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sat Jun 15 03:54:19 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Jun 15 03:54:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sat Jun 15 03:54:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:32 2013] Spatial fit model total counts = 1431.580000, observed total counts = 1173.000000
[Sat Jun 15 03:54:32 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 03:54:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:32 2013] Assessing source extent using major
[Sat Jun 15 03:54:32 2013] Source does appear to be extended
[Sat Jun 15 03:54:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:54:49 2013] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:49 2013] Initial guess for spatial extent in simple fitting = 7.48"
[Sat Jun 15 03:54:49 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.609
[Sat Jun 15 03:54:49 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 7.48"
[Sat Jun 15 03:54:51 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src28.ximg exists
[Sat Jun 15 03:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src28.csv
[Sat Jun 15 03:54:51 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src28_1.ximg exists
[Sat Jun 15 03:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src28.csv
[Sat Jun 15 03:54:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:51 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sat Jun 15 03:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sat Jun 15 03:54:51 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Jun 15 03:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sat Jun 15 03:54:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:55:04 2013] Source 31 is offset by -2.666588 and 0.041824 pixels which is larger than
2 X fitted extent = 1.088386 x 1.561237, not incorporating fit results
[Sat Jun 15 03:55:04 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 14.086523 pixels away
[Sat Jun 15 03:55:04 2013] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 27.540975 pixels away
[Sat Jun 15 03:55:04 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:55:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:55:04 2013] Assessing source extent using major
[Sat Jun 15 03:55:04 2013] Source does appear to be extended
[Sat Jun 15 03:55:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:55:19 2013] XMMSAS src. selection expression = ellipse(26482.352844, 28377.356110, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 03:55:19 2013] Not overwriting source region fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_src.reg
[Sat Jun 15 03:55:19 2013] Extracting stamp from image fullrun_pn_xmm0553720101_pi300-10000_cl_sm2.00.img.gz, (267, 289) - (342, 364)
[Sat Jun 15 03:55:19 2013] XMMSAS bgd. selection expression = annulus(26482.352844, 28377.356110, 1087.500000, 2175.000000, X, Y) && !ellipse(23945.549300, 31690.161000, 1441.640041, 388.571211, 79.953700, X, Y) && !ellipse(23992.068400, 31355.380000, 1785.368051, 407.623212, 81.324100, X, Y) && !ellipse(24102.639465, 30583.587219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24114.689400, 29887.060000, 714.071221, 714.071221, 0.000000, X, Y) && !ellipse(24307.688500, 29100.297800, 1265.808036, 401.038412, 77.678800, X, Y) && !ellipse(24313.172470, 29020.027780, 1624.120047, 438.242413, 81.540320, X, Y) && !ellipse(24448.116200, 28178.579200, 1205.968035, 377.957611, 77.404800, X, Y) && !ellipse(24488.540080, 27746.425000, 1175.200034, 401.068012, 82.513450, X, Y) && !ellipse(24626.380400, 26756.538000, 1119.432032, 300.421609, 84.162440, X, Y) && !ellipse(24645.940600, 26538.828000, 1419.856041, 301.476009, 81.676800, X, Y)
[Sat Jun 15 03:55:19 2013] Writing fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31.gif
[Sat Jun 15 03:55:26 2013] ../../xmm0553720101/products/events/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0553720101/products/events/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Sat Jun 15 03:55:27 2013] Mean detx,y = (-1880.35, 3831.54) 
[Sat Jun 15 03:55:27 2013] ../../xmm0553720101/products/images/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_src.img and ../../xmm0553720101/products/images/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Sat Jun 15 03:55:27 2013] ../../xmm0553720101/products/spectra/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0553720101/products/spectra/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Sat Jun 15 03:55:27 2013] Setting source spectrum file to fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Jun 15 03:55:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Jun 15 03:55:27 2013] ../../xmm0553720101/products/lightcurves/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0553720101/products/lightcurves/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Sat Jun 15 03:55:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 03:55:40 2013] rmf not generated due to insufficient counts
[Sat Jun 15 03:55:40 2013] fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31.arf exists, delete to re-create
[Sat Jun 15 04:02:25 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:02:25 2013] Total counts from fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 901.00
[Sat Jun 15 04:02:25 2013] Total counts from fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 5095.00
[Sat Jun 15 04:02:25 2013] Got source and background scale factors 1016776.000000, 8700866.000000
[Sat Jun 15 04:02:25 2013] User source parameters:
  Position = (305.0, 326.7) = 16 15 9.35 -28 33 55.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 305.6 +/- 31.0
  Background aperture counts = 595.4
  Rate = 0.007 +/- 0.0007

[Sat Jun 15 04:02:25 2013] Updating counts from extracted products
[Sat Jun 15 04:02:25 2013] Set source signif. to 305.60/24.40 = 12.52
[Sat Jun 15 04:02:31 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 04:02:31 2013] Using photon index=1.80, rate=0.00722, arf fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31.arf
[Sat Jun 15 04:02:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 04:02:31 2013] Updating source flux to 4.3e-14
[Sat Jun 15 04:02:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 04:02:58 2013] xmm0553720101/analysis//spectral/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete