[Sat Jun 15 03:53:48 2013] Detection parameters:
  Position = (352.0, 411.8) = 16 14 53.83 -28 27 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 287.5 +/- 27.5
  Background counts = 175.9
  Rate = 0.005 +/- 0.0005

[Sat Jun 15 03:53:51 2013] Off-axis axis estimate = 9.09'
[Sat Jun 15 03:54:17 2013] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:17 2013] Initial guess for spatial extent in simple fitting = 10.97"
[Sat Jun 15 03:54:17 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Sat Jun 15 03:54:17 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.97"
[Sat Jun 15 03:54:18 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun 15 03:54:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src11.csv
[Sat Jun 15 03:54:18 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun 15 03:54:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src11.csv
[Sat Jun 15 03:54:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:19 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun 15 03:54:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 15 03:54:19 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun 15 03:54:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 15 03:54:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:32 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.451665 pixels away
[Sat Jun 15 03:54:32 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:32 2013] Assessing source extent using major
[Sat Jun 15 03:54:32 2013] Source does appear to be extended
[Sat Jun 15 03:54:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:54:49 2013] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:49 2013] Initial guess for spatial extent in simple fitting = 10.97"
[Sat Jun 15 03:54:49 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Sat Jun 15 03:54:49 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.97"
[Sat Jun 15 03:54:50 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun 15 03:54:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src10.csv
[Sat Jun 15 03:54:50 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun 15 03:54:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src10.csv
[Sat Jun 15 03:54:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:51 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun 15 03:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun 15 03:54:51 2013] fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun 15 03:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun 15 03:54:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:55:04 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.451665 pixels away
[Sat Jun 15 03:55:04 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:55:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:55:04 2013] Assessing source extent using major
[Sat Jun 15 03:55:04 2013] Source does appear to be extended
[Sat Jun 15 03:55:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:55:19 2013] XMMSAS src. selection expression = ellipse(30574.475159, 35777.408630, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 03:55:19 2013] Not overwriting source region fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_src.reg
[Sat Jun 15 03:55:19 2013] Extracting stamp from image fullrun_pn_xmm0553720101_pi300-10000_cl_sm2.00.img.gz, (314, 374) - (389, 449)
[Sat Jun 15 03:55:19 2013] XMMSAS bgd. selection expression = annulus(30574.475159, 35777.408630, 1087.500000, 2175.000000, X, Y)
[Sat Jun 15 03:55:19 2013] Writing fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12.gif
[Sat Jun 15 03:55:23 2013] ../../xmm0553720101/products/events/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_src.evt and ../../xmm0553720101/products/events/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sat Jun 15 03:55:23 2013] Mean detx,y = (-6964.31, 10598.08) 
[Sat Jun 15 03:55:23 2013] ../../xmm0553720101/products/images/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_src.img and ../../xmm0553720101/products/images/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_bgd.img exist, delete to re-create
[Sat Jun 15 03:55:23 2013] ../../xmm0553720101/products/spectra/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_src_b10.pi.gz and ../../xmm0553720101/products/spectra/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sat Jun 15 03:55:23 2013] Setting source spectrum file to fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun 15 03:55:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jun 15 03:55:23 2013] ../../xmm0553720101/products/lightcurves/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_src.lc and ../../xmm0553720101/products/lightcurves/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sat Jun 15 03:55:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 03:55:40 2013] rmf not generated due to insufficient counts
[Sat Jun 15 03:55:40 2013] fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12.arf exists, delete to re-create
[Sat Jun 15 04:02:20 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:02:20 2013] Total counts from fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 795.00
[Sat Jun 15 04:02:20 2013] Total counts from fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_bgd.pi.gz = 5010.00
[Sat Jun 15 04:02:20 2013] Got source and background scale factors 1187492.000000, 10456013.000000
[Sat Jun 15 04:02:20 2013] User source parameters:
  Position = (352.0, 411.8) = 16 14 53.83 -28 27 44.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 226.0 +/- 29.2
  Background aperture counts = 569.0
  Rate = 0.005 +/- 0.0007

[Sat Jun 15 04:02:20 2013] Updating counts from extracted products
[Sat Jun 15 04:02:20 2013] Set source signif. to 226.01/23.85 = 9.48
[Sat Jun 15 04:02:30 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 04:02:30 2013] Using photon index=1.80, rate=0.00534, arf fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12.arf
[Sat Jun 15 04:02:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 04:02:30 2013] Updating source flux to 4.3e-14
[Sat Jun 15 04:02:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 04:02:58 2013] xmm0553720101/analysis//spectral/fullrun_pn_xmm0553720101_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete