[Sat Jun 15 03:53:53 2013] Detection parameters:
  Position = (266.6, 193.2) = 16 15 22.04 -28 43 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.1 +/- 16.4
  Background counts = 30.1
  Rate = 0.005 +/- 0.0005

[Sat Jun 15 03:53:54 2013] Off-axis axis estimate = 7.97'
[Sat Jun 15 03:54:20 2013] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 03:54:20 2013] Initial guess for spatial extent in simple fitting = 10.41"
[Sat Jun 15 03:54:20 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.895
[Sat Jun 15 03:54:20 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.41"
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src2.csv
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src2.csv
[Sat Jun 15 03:54:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun 15 03:54:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:39 2013] Spatial fit model total counts = 465.509000, observed total counts = 368.000000
[Sat Jun 15 03:54:39 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 03:54:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:39 2013] Assessing source extent using major
[Sat Jun 15 03:54:39 2013] Source does appear to be extended
[Sat Jun 15 03:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:54:52 2013] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 03:54:52 2013] Initial guess for spatial extent in simple fitting = 10.41"
[Sat Jun 15 03:54:52 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.895
[Sat Jun 15 03:54:52 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.41"
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src2.csv
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src2.csv
[Sat Jun 15 03:54:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun 15 03:54:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:55:09 2013] Spatial fit model total counts = 465.569000, observed total counts = 368.000000
[Sat Jun 15 03:55:09 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 03:55:09 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:55:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:55:09 2013] Assessing source extent using major
[Sat Jun 15 03:55:09 2013] Source does appear to be extended
[Sat Jun 15 03:55:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:55:42 2013] XMMSAS src. selection expression = ellipse(23142.015350, 16758.983749, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 03:55:42 2013] Not overwriting source region fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_src.reg
[Sat Jun 15 03:55:42 2013] Extracting stamp from image fullrun_mos2_xmm0553720101_pi300-10000_cl_sm2.00.img.gz, (229, 156) - (304, 231)
[Sat Jun 15 03:55:42 2013] XMMSAS bgd. selection expression = annulus(23142.015350, 16758.983749, 1087.500000, 2175.000000, X, Y)
[Sat Jun 15 03:55:42 2013] Writing fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9.gif
[Sat Jun 15 03:55:45 2013] ../../xmm0553720101/products/events/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0553720101/products/events/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sat Jun 15 03:55:45 2013] Mean detx,y = (-2757.98, 7146.12) 
[Sat Jun 15 03:55:45 2013] ../../xmm0553720101/products/images/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_src.img and ../../xmm0553720101/products/images/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Sat Jun 15 03:55:45 2013] ../../xmm0553720101/products/spectra/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0553720101/products/spectra/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sat Jun 15 03:55:45 2013] Setting source spectrum file to fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Jun 15 03:55:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Jun 15 03:55:45 2013] ../../xmm0553720101/products/lightcurves/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0553720101/products/lightcurves/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sat Jun 15 03:57:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 03:57:34 2013] rmf not generated due to insufficient counts
[Sat Jun 15 04:02:34 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:02:34 2013] Total counts from fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 317.00
[Sat Jun 15 04:02:34 2013] Total counts from fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1070.00
[Sat Jun 15 04:02:34 2013] Got source and background scale factors 1049984.000000, 5899537.000000
[Sat Jun 15 04:02:34 2013] User source parameters:
  Position = (266.6, 193.2) = 16 15 22.04 -28 43 37.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 126.6 +/- 18.8
  Background aperture counts = 190.4
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 04:02:34 2013] Updating counts from extracted products
[Sat Jun 15 04:02:34 2013] Set source signif. to 126.56/13.80 = 9.17
[Sat Jun 15 04:02:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 04:02:38 2013] Using photon index=1.80, rate=0.00232, arf fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9.arf
[Sat Jun 15 04:02:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 04:02:38 2013] Updating source flux to 4.4e-14
[Sat Jun 15 04:02:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 04:02:44 2013] xmm0553720101/analysis//spectral/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete