[Sat Jun 15 03:53:53 2013] Detection parameters:
  Position = (278.2, 283.0) = 16 15 18.20 -28 37 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.5 +/- 20.4
  Background counts = 47.4
  Rate = 0.003 +/- 0.0005

[Sat Jun 15 03:53:54 2013] Off-axis axis estimate = 1.85'
[Sat Jun 15 03:54:20 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:20 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Sat Jun 15 03:54:20 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.625
[Sat Jun 15 03:54:20 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.35"
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src6.csv
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src6.csv
[Sat Jun 15 03:54:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun 15 03:54:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:39 2013] Warning, spatial fit 6 centroid is now closest to src. 3
[Sat Jun 15 03:54:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:39 2013] Assessing source extent using major
[Sat Jun 15 03:54:39 2013] Source does appear to be extended
[Sat Jun 15 03:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:54:39 2013] Source is confused with source 16
[Sat Jun 15 03:54:52 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:52 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Sat Jun 15 03:54:52 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.625
[Sat Jun 15 03:54:52 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 7.35"
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src6.csv
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src6.csv
[Sat Jun 15 03:54:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jun 15 03:54:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:55:09 2013] Warning, spatial fit 6 centroid is now closest to src. 3
[Sat Jun 15 03:55:09 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:55:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:55:09 2013] Assessing source extent using major
[Sat Jun 15 03:55:09 2013] Source does appear to be extended
[Sat Jun 15 03:55:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:55:42 2013] XMMSAS src. selection expression = ellipse(24150.554779, 24576.288727, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 03:55:42 2013] Not overwriting source region fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_src.reg
[Sat Jun 15 03:55:42 2013] Extracting stamp from image fullrun_mos2_xmm0553720101_pi300-10000_cl_sm2.00.img.gz, (241, 246) - (316, 321)
[Sat Jun 15 03:55:42 2013] XMMSAS bgd. selection expression = annulus(24150.554779, 24576.288727, 1087.500000, 2175.000000, X, Y) && !ellipse(25004.858246, 24038.085083, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24259.979156, 23263.729858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23933.723846, 24060.512115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21700.736679, 25557.040619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24419.073822, 22642.216705, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 03:55:42 2013] Writing fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7.gif
[Sat Jun 15 03:55:45 2013] ../../xmm0553720101/products/events/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0553720101/products/events/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sat Jun 15 03:55:45 2013] Mean detx,y = (-544.13, -356.14) 
[Sat Jun 15 03:55:45 2013] ../../xmm0553720101/products/images/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_src.img and ../../xmm0553720101/products/images/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Sat Jun 15 03:55:45 2013] ../../xmm0553720101/products/spectra/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0553720101/products/spectra/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sat Jun 15 03:55:45 2013] Setting source spectrum file to fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jun 15 03:55:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sat Jun 15 03:55:45 2013] ../../xmm0553720101/products/lightcurves/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0553720101/products/lightcurves/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sat Jun 15 03:58:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 03:58:02 2013] rmf not generated due to insufficient counts
[Sat Jun 15 04:02:35 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:02:35 2013] Total counts from fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 2127.00
[Sat Jun 15 04:02:35 2013] Total counts from fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 446.00
[Sat Jun 15 04:02:35 2013] Got source and background scale factors 1158400.000000, 1585764.000000
[Sat Jun 15 04:02:35 2013] User source parameters:
  Position = (278.2, 283.0) = 16 15 18.20 -28 37 3.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1801.2 +/- 47.1
  Background aperture counts = 325.8
  Rate = 0.03 +/- 0.0009

[Sat Jun 15 04:02:35 2013] Updating counts from extracted products
[Sat Jun 15 04:02:35 2013] Set source signif. to 1801.20/18.05 = 99.79
[Sat Jun 15 04:02:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 04:02:38 2013] Using photon index=1.80, rate=0.033, arf fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7.arf
[Sat Jun 15 04:02:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 04:02:38 2013] Updating source flux to 4.3e-13
[Sat Jun 15 04:02:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 04:02:44 2013] xmm0553720101/analysis//spectral/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete