[Sat Jun 15 03:53:53 2013] Detection parameters:
  Position = (288.0, 276.9) = 16 15 14.96 -28 37 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50427.2 +/- 267.6
  Background counts = 47.4
  Rate = 1 +/- 0.005

[Sat Jun 15 03:53:54 2013] Off-axis axis estimate = 1.74'
[Sat Jun 15 03:54:20 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:20 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Jun 15 03:54:20 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sat Jun 15 03:54:20 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src1.csv
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src1.csv
[Sat Jun 15 03:54:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 15 03:54:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:39 2013] Spatial fit model total counts = 54887.600000, observed total counts = 43806.000000
[Sat Jun 15 03:54:39 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 03:54:39 2013] Source 3 is offset by 3.209589 and -1.169321 pixels which is larger than
2 X fitted extent = 0.989536 x 2.685094, not incorporating fit results
[Sat Jun 15 03:54:39 2013] Source 3 is offset by 1.860555 and 0.748219 pixels which is larger than
2 X fitted extent = 1.805048 x 4.113324, not incorporating fit results
[Sat Jun 15 03:54:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:39 2013] Assessing source extent using major
[Sat Jun 15 03:54:39 2013] Source does appear to be extended
[Sat Jun 15 03:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:54:52 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:52 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Jun 15 03:54:52 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sat Jun 15 03:54:52 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Sat Jun 15 03:54:52 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src1.csv
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src1.csv
[Sat Jun 15 03:54:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 15 03:54:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:55:09 2013] Spatial fit model total counts = 54888.900000, observed total counts = 43806.000000
[Sat Jun 15 03:55:09 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 03:55:09 2013] Source 3 is offset by 3.209451 and -1.257643 pixels which is larger than
2 X fitted extent = 2.057297 x 2.057297, not incorporating fit results
[Sat Jun 15 03:55:09 2013] Source 3 is offset by 1.860555 and 0.748219 pixels which is larger than
2 X fitted extent = 1.625738 x 3.835573, not incorporating fit results
[Sat Jun 15 03:55:09 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:55:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:55:09 2013] Assessing source extent using major
[Sat Jun 15 03:55:09 2013] Source does appear to be extended
[Sat Jun 15 03:55:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:55:42 2013] Counts = 50427.207031, rescaling region sizes by 3.000000
[Sat Jun 15 03:55:42 2013] XMMSAS src. selection expression = ellipse(25004.858246, 24038.085083, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sat Jun 15 03:55:42 2013] Not overwriting source region fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 15 03:55:42 2013] Extracting stamp from image fullrun_mos2_xmm0553720101_pi300-10000_cl_sm2.00.img.gz, (175, 164) - (400, 389)
[Sat Jun 15 03:55:42 2013] XMMSAS bgd. selection expression = annulus(25004.858246, 24038.085083, 9787.500000, 19575.000000, X, Y) && !ellipse(23142.015350, 16758.983749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15187.121445, 26153.474365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11680.480881, 22749.939209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17806.180405, 20250.412323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24150.554779, 24576.288727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20224.812531, 30762.756561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24259.979156, 23263.729858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23933.723846, 24060.512115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30564.484283, 35771.368439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21700.736679, 25557.040619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38341.256256, 19971.785583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24711.098200, 32206.758200, 340.023210, 340.023210, 0.000000, X, Y) && !ellipse(27866.557520, 11389.137200, 980.568028, 335.148810, 345.258759, X, Y) && !ellipse(27138.978760, 13536.037048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13558.348587, 33355.918365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24419.073822, 22642.216705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15039.203125, 36905.158875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9098.955406, 22465.261658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25986.741180, 41294.933868, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 03:55:42 2013] Writing fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3.gif
[Sat Jun 15 03:55:45 2013] ../../xmm0553720101/products/events/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0553720101/products/events/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Jun 15 03:55:45 2013] Mean detx,y = (54.44, 115.89) 
[Sat Jun 15 03:55:45 2013] ../../xmm0553720101/products/images/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0553720101/products/images/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Jun 15 03:55:45 2013] ../../xmm0553720101/products/spectra/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0553720101/products/spectra/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Jun 15 03:55:45 2013] Setting source spectrum file to fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 15 03:55:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 15 03:55:45 2013] ../../xmm0553720101/products/lightcurves/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0553720101/products/lightcurves/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Jun 15 03:57:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 03:57:18 2013] rmf not generated due to insufficient counts
[Sat Jun 15 04:02:34 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:02:34 2013] Total counts from fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 50765.00
[Sat Jun 15 04:02:34 2013] Total counts from fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 83685.00
[Sat Jun 15 04:02:34 2013] Got source and background scale factors 11395160.000000, 542801807.000000
[Sat Jun 15 04:02:34 2013] User source parameters:
  Position = (288.0, 276.9) = 16 15 14.96 -28 37 32.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 49008.2 +/- 226.3
  Background aperture counts = 1756.8
  Rate = 0.9 +/- 0.004

[Sat Jun 15 04:02:34 2013] Updating counts from extracted products
[Sat Jun 15 04:02:34 2013] Set source signif. to 49008.18/41.91 = 1169.24
[Sat Jun 15 04:02:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 04:02:38 2013] Using photon index=1.80, rate=0.897, arf fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3.arf
[Sat Jun 15 04:02:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 04:02:38 2013] Updating source flux to 8.9e-12
[Sat Jun 15 04:02:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 04:02:44 2013] xmm0553720101/analysis//spectral/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete