[Sat Jun 15 03:53:54 2013] Detection parameters:
  Position = (281.2, 260.8) = 16 15 17.18 -28 38 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.9 +/- 13.6
  Background counts = 45.2
  Rate = 0.001 +/- 0.0004

[Sat Jun 15 03:53:54 2013] Off-axis axis estimate = 3.00'
[Sat Jun 15 03:54:20 2013] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:20 2013] Initial guess for spatial extent in simple fitting = 7.93"
[Sat Jun 15 03:54:20 2013] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.649
[Sat Jun 15 03:54:20 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.93"
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src17.csv
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src17.csv
[Sat Jun 15 03:54:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Jun 15 03:54:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:39 2013] Spatial fit model total counts = 1352.680000, observed total counts = 1173.000000
[Sat Jun 15 03:54:39 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 03:54:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:39 2013] Assessing source extent using major
[Sat Jun 15 03:54:39 2013] Source does appear to be extended
[Sat Jun 15 03:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:54:39 2013] Source is confused with source 17
[Sat Jun 15 03:54:52 2013] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:52 2013] Initial guess for spatial extent in simple fitting = 7.93"
[Sat Jun 15 03:54:52 2013] source mask rpix=1.8, npix_max = 21, mask sum = 14, frac = 0.649
[Sat Jun 15 03:54:52 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.93"
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src17.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src17.csv
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src17.csv
[Sat Jun 15 03:54:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:54 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Jun 15 03:54:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Jun 15 03:54:54 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Jun 15 03:54:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Jun 15 03:54:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:55:09 2013] Spatial fit model total counts = 1345.870000, observed total counts = 1173.000000
[Sat Jun 15 03:55:09 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 03:55:09 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:55:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:55:09 2013] Assessing source extent using major
[Sat Jun 15 03:55:09 2013] Source does appear to be extended
[Sat Jun 15 03:55:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:55:42 2013] XMMSAS src. selection expression = ellipse(24419.073822, 22642.216705, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 03:55:42 2013] Not overwriting source region fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src19_src.reg
[Sat Jun 15 03:55:42 2013] Extracting stamp from image fullrun_mos2_xmm0553720101_pi300-10000_cl_sm2.00.img.gz, (244, 223) - (319, 298)
[Sat Jun 15 03:55:42 2013] XMMSAS bgd. selection expression = annulus(24419.073822, 22642.216705, 1087.500000, 2175.000000, X, Y) && !ellipse(25004.858246, 24038.085083, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24150.554779, 24576.288727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24259.979156, 23263.729858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23933.723846, 24060.512115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21700.736679, 25557.040619, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 03:55:42 2013] Writing fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src19.gif
[Sat Jun 15 03:55:46 2013] ../../xmm0553720101/products/events/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0553720101/products/events/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Sat Jun 15 03:55:47 2013] Mean detx,y = (-684.38, 1320.56) 
[Sat Jun 15 03:55:49 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 03:56:05 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 03:56:05 2013] Setting source spectrum file to fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jun 15 03:56:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Jun 15 04:00:32 2013] Not generating rmf since there are only 55 counts
[Sat Jun 15 04:00:32 2013] rmf not generated due to insufficient counts
[Sat Jun 15 04:02:37 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:02:37 2013] Total counts from fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 650.00
[Sat Jun 15 04:02:37 2013] Total counts from fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src19_bgd.pi.gz = 781.00
[Sat Jun 15 04:02:37 2013] Got source and background scale factors 1128660.000000, 3605738.000000
[Sat Jun 15 04:02:37 2013] User source parameters:
  Position = (281.2, 260.8) = 16 15 17.18 -28 38 37.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 405.5 +/- 26.5
  Background aperture counts = 244.5
  Rate = 0.007 +/- 0.0005

[Sat Jun 15 04:02:37 2013] Updating counts from extracted products
[Sat Jun 15 04:02:37 2013] Set source signif. to 405.53/15.64 = 25.94
[Sat Jun 15 04:02:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 04:02:38 2013] Using photon index=1.80, rate=0.00743, arf fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src19.arf
[Sat Jun 15 04:02:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 04:02:38 2013] Updating source flux to 9.5e-14
[Sat Jun 15 04:02:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 04:02:44 2013] xmm0553720101/analysis//spectral/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete