[Sat Jun 15 03:53:54 2013] Detection parameters:
  Position = (250.0, 294.3) = 16 15 27.50 -28 36 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.6 +/- 13.9
  Background counts = 44.4
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 03:53:54 2013] Off-axis axis estimate = 3.52'
[Sat Jun 15 03:54:20 2013] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:20 2013] Initial guess for spatial extent in simple fitting = 8.19"
[Sat Jun 15 03:54:20 2013] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.660
[Sat Jun 15 03:54:20 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 8.19"
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src11.csv
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src11.csv
[Sat Jun 15 03:54:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 15 03:54:21 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun 15 03:54:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 15 03:54:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:39 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 10.173578 pixels away
[Sat Jun 15 03:54:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:39 2013] Assessing source extent using major
[Sat Jun 15 03:54:39 2013] Source does appear to be extended
[Sat Jun 15 03:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:54:52 2013] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:52 2013] Initial guess for spatial extent in simple fitting = 8.19"
[Sat Jun 15 03:54:52 2013] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.660
[Sat Jun 15 03:54:52 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 8.19"
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src11.csv
[Sat Jun 15 03:54:53 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun 15 03:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src11.csv
[Sat Jun 15 03:54:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:54 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun 15 03:54:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 15 03:54:54 2013] fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun 15 03:54:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 15 03:54:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:55:09 2013] Source 15 is offset by 3.580996 and -0.339919 pixels which is larger than
2 X fitted extent = 1.021623 x 1.021623, not incorporating fit results
[Sat Jun 15 03:55:09 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:55:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:55:09 2013] Assessing source extent using major
[Sat Jun 15 03:55:09 2013] Source does appear to be extended
[Sat Jun 15 03:55:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:55:42 2013] XMMSAS src. selection expression = ellipse(21700.736679, 25557.040619, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 03:55:42 2013] Not overwriting source region fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_src.reg
[Sat Jun 15 03:55:42 2013] Extracting stamp from image fullrun_mos2_xmm0553720101_pi300-10000_cl_sm2.00.img.gz, (212, 257) - (287, 332)
[Sat Jun 15 03:55:42 2013] XMMSAS bgd. selection expression = annulus(21700.736679, 25557.040619, 1087.500000, 2175.000000, X, Y) && !ellipse(25004.858246, 24038.085083, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24150.554779, 24576.288727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24259.979156, 23263.729858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23933.723846, 24060.512115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24419.073822, 22642.216705, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 03:55:42 2013] Writing fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15.gif
[Sat Jun 15 03:55:46 2013] ../../xmm0553720101/products/events/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0553720101/products/events/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sat Jun 15 03:55:46 2013] Mean detx,y = (-2886.92, -1798.79) 
[Sat Jun 15 03:55:46 2013] ../../xmm0553720101/products/images/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_src.img and ../../xmm0553720101/products/images/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Sat Jun 15 03:55:46 2013] ../../xmm0553720101/products/spectra/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0553720101/products/spectra/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sat Jun 15 03:55:46 2013] Setting source spectrum file to fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jun 15 03:55:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Jun 15 03:55:46 2013] ../../xmm0553720101/products/lightcurves/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0553720101/products/lightcurves/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sat Jun 15 03:58:58 2013] Not generating rmf since there are only 96 counts
[Sat Jun 15 03:58:58 2013] rmf not generated due to insufficient counts
[Sat Jun 15 04:02:36 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:02:36 2013] Total counts from fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 312.00
[Sat Jun 15 04:02:36 2013] Total counts from fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 686.00
[Sat Jun 15 04:02:36 2013] Got source and background scale factors 825030.000000, 2377112.000000
[Sat Jun 15 04:02:36 2013] User source parameters:
  Position = (250.0, 294.3) = 16 15 27.50 -28 36 16.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 73.9 +/- 18.7
  Background aperture counts = 238.1
  Rate = 0.001 +/- 0.0003

[Sat Jun 15 04:02:36 2013] Updating counts from extracted products
[Sat Jun 15 04:02:36 2013] Set source signif. to 73.91/15.43 = 4.79
[Sat Jun 15 04:02:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 04:02:38 2013] Using photon index=1.80, rate=0.00135, arf fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15.arf
[Sat Jun 15 04:02:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 04:02:38 2013] Updating source flux to 1.7e-14
[Sat Jun 15 04:02:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 04:02:44 2013] xmm0553720101/analysis//spectral/fullrun_mos2_xmm0553720101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete