[Sat Jun 15 03:53:51 2013] Detection parameters:
  Position = (266.1, 192.9) = 16 15 22.20 -28 43 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.8 +/- 18.7
  Background counts = 42.7
  Rate = 0.005 +/- 0.0005

[Sat Jun 15 03:53:52 2013] Off-axis axis estimate = 8.00'
[Sat Jun 15 03:54:19 2013] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:19 2013] Initial guess for spatial extent in simple fitting = 10.43"
[Sat Jun 15 03:54:19 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Sat Jun 15 03:54:19 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.43"
[Sat Jun 15 03:54:20 2013] fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun 15 03:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_src4.csv
[Sat Jun 15 03:54:20 2013] fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun 15 03:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_src4.csv
[Sat Jun 15 03:54:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:20 2013] fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun 15 03:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 15 03:54:20 2013] fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun 15 03:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 15 03:54:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:35 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.396927 pixels away
[Sat Jun 15 03:54:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:35 2013] Assessing source extent using major
[Sat Jun 15 03:54:35 2013] Source does appear to be extended
[Sat Jun 15 03:54:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:54:52 2013] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:52 2013] Initial guess for spatial extent in simple fitting = 10.43"
[Sat Jun 15 03:54:52 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Sat Jun 15 03:54:52 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 10.43"
[Sat Jun 15 03:54:52 2013] fullrun_mos1_xmm0553720101_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jun 15 03:54:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553720101_pi300-10000_cl_pass1_src4.csv
[Sat Jun 15 03:54:52 2013] fullrun_mos1_xmm0553720101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jun 15 03:54:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553720101_pi300-10000_cl_pass1_src4.csv
[Sat Jun 15 03:54:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553720101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553720101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:52 2013] fullrun_mos1_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jun 15 03:54:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 15 03:54:52 2013] fullrun_mos1_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jun 15 03:54:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 15 03:54:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553720101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:55:06 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.396927 pixels away
[Sat Jun 15 03:55:06 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:55:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:55:06 2013] Assessing source extent using major
[Sat Jun 15 03:55:06 2013] Source does appear to be extended
[Sat Jun 15 03:55:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:55:40 2013] XMMSAS src. selection expression = ellipse(23100.766815, 16736.162445, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 03:55:40 2013] Not overwriting source region fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun 15 03:55:40 2013] Extracting stamp from image fullrun_mos1_xmm0553720101_pi300-10000_cl_sm2.00.img.gz, (229, 155) - (304, 230)
[Sat Jun 15 03:55:40 2013] XMMSAS bgd. selection expression = annulus(23100.766815, 16736.162445, 1087.500000, 2175.000000, X, Y)
[Sat Jun 15 03:55:40 2013] Writing fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6.gif
[Sat Jun 15 03:55:41 2013] ../../xmm0553720101/products/events/fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0553720101/products/events/fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sat Jun 15 03:55:41 2013] Mean detx,y = (7301.84, 2651.51) 
[Sat Jun 15 03:55:41 2013] ../../xmm0553720101/products/images/fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_src.img and ../../xmm0553720101/products/images/fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Sat Jun 15 03:55:41 2013] ../../xmm0553720101/products/spectra/fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0553720101/products/spectra/fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sat Jun 15 03:55:41 2013] Setting source spectrum file to fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 15 03:55:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun 15 03:55:41 2013] ../../xmm0553720101/products/lightcurves/fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0553720101/products/lightcurves/fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sat Jun 15 03:55:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 15 03:55:42 2013] rmf not generated due to insufficient counts
[Sat Jun 15 03:55:42 2013] fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6.arf exists, delete to re-create
[Sat Jun 15 04:02:32 2013] Updating aperture counts using extracted products
[Sat Jun 15 04:02:32 2013] Total counts from fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 470.00
[Sat Jun 15 04:02:32 2013] Total counts from fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1431.00
[Sat Jun 15 04:02:32 2013] Got source and background scale factors 1327524.000000, 6650159.000000
[Sat Jun 15 04:02:32 2013] User source parameters:
  Position = (266.1, 192.9) = 16 15 22.20 -28 43 37.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 184.3 +/- 22.7
  Background aperture counts = 285.7
  Rate = 0.003 +/- 0.0004

[Sat Jun 15 04:02:32 2013] Updating counts from extracted products
[Sat Jun 15 04:02:32 2013] Set source signif. to 184.34/16.90 = 10.91
[Sat Jun 15 04:02:33 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 04:02:33 2013] Using photon index=1.80, rate=0.00338, arf fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6.arf
[Sat Jun 15 04:02:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 04:02:33 2013] Updating source flux to 5e-14
[Sat Jun 15 04:02:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 04:02:43 2013] xmm0553720101/analysis//spectral/fullrun_mos1_xmm0553720101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete