[Sat Jun 15 03:53:52 2013] Detection parameters:
  Position = (105.4, 257.8) = 16 16 15.29 -28 38 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.8 +/- 11.5
  Background counts = 29.9
  Rate = 0.0009 +/- 0.0002

[Sat Jun 15 03:53:52 2013] Off-axis axis estimate = 14.30'
[Sat Jun 15 03:54:19 2013] Using EEF radius (= 13.58 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 03:54:19 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 03:54:19 2013] Initial guess for spatial extent in simple fitting = 13.58"
[Sat Jun 15 03:54:19 2013] source mask rpix=3.1, npix_max = 52, mask sum = 45, frac = 0.858
[Sat Jun 15 03:54:19 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 13.58"
[Sat Jun 15 03:54:20 2013] fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun 15 03:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_src17.csv
[Sat Jun 15 03:54:20 2013] fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun 15 03:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_src17.csv
[Sat Jun 15 03:54:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:20 2013] fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun 15 03:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Jun 15 03:54:20 2013] fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun 15 03:54:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Jun 15 03:54:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553720101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 03:54:35 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 17.423747 pixels away
[Sat Jun 15 03:54:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 03:54:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 03:54:35 2013] Assessing source extent using major
[Sat Jun 15 03:54:35 2013] Source does appear to be extended
[Sat Jun 15 03:54:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 03:54:35 2013] Deleting source due to low Poisson probability 0.8