[Thu Aug 16 10:15:08 2012] Detection parameters:
  Position = (274.2, 438.8) = 19 8 45.19 6 20 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.3 +/- 10.3
  Background counts = 6.2
  Rate = 0.004 +/- 0.0006

[Thu Aug 16 10:15:08 2012] Off-axis axis estimate = 10.33'
[Thu Aug 16 10:35:28 2012] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 10:35:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 16 10:35:28 2012] Initial guess for spatial extent in simple fitting = 11.59"
[Thu Aug 16 10:35:28 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.898
[Thu Aug 16 10:35:28 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.59"
[Thu Aug 16 10:43:53 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_src4.ximg exists
[Thu Aug 16 10:43:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_src4.csv
[Thu Aug 16 10:43:53 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Aug 16 10:43:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_src4.csv
[Thu Aug 16 10:43:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 10:43:53 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Aug 16 10:43:53 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Aug 16 10:43:53 2012] Fit fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Aug 16 10:53:46 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.026999 pixels away
[Thu Aug 16 10:53:46 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 10:53:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 10:53:46 2012] Assessing source extent using major
[Thu Aug 16 10:53:46 2012] Source does appear to be extended
[Thu Aug 16 10:53:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 11:10:53 2012] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 11:10:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 16 11:10:53 2012] Initial guess for spatial extent in simple fitting = 11.59"
[Thu Aug 16 11:10:53 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.898
[Thu Aug 16 11:10:53 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.59"
[Thu Aug 16 11:16:25 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_src4.ximg exists
[Thu Aug 16 11:16:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_src4.csv
[Thu Aug 16 11:16:25 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Aug 16 11:16:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_src4.csv
[Thu Aug 16 11:16:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 11:16:25 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Aug 16 11:16:25 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Aug 16 11:16:25 2012] Fit fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Aug 16 11:25:13 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.487822 pixels away
[Thu Aug 16 11:25:13 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 11:25:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 11:25:13 2012] Assessing source extent using major
[Thu Aug 16 11:25:13 2012] Source does appear to be extended
[Thu Aug 16 11:25:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 11:42:10 2012] XMMSAS src. selection expression = ellipse(23810.538452, 38129.796448, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 11:42:10 2012] Writing source region out to fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src5_src.reg
[Thu Aug 16 11:42:10 2012] Extracting stamp from image fullrun_mos1_xmm0553640201_pi300-10000_cl_sm2.00.img.gz, (237, 401) - (312, 476)
[Thu Aug 16 11:42:10 2012] XMMSAS bgd. selection expression = annulus(23810.538452, 38129.796448, 1087.500000, 2175.000000, X, Y)
[Thu Aug 16 11:42:10 2012] Writing fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src5.gif
[Thu Aug 16 11:42:51 2012] Mean detx,y = (10673.29, -4245.22) 
[Thu Aug 16 11:42:52 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 11:43:02 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 11:43:02 2012] Setting source spectrum file to fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Aug 16 11:43:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Aug 16 11:47:29 2012] Not generating rmf since there are only 64 counts
[Thu Aug 16 11:47:29 2012] rmf not generated due to insufficient counts
[Thu Aug 16 11:51:55 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:51:55 2012] Error reading totcts from fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Aug 16 11:51:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:51:55 2012] Using photon index=1.80, rate=0.00361, arf fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src5.arf
[Thu Aug 16 11:51:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:51:55 2012] Updating source flux to 6.9e-14
[Thu Aug 16 11:51:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting