[Thu Aug 16 10:15:08 2012] Detection parameters:
  Position = (223.6, 216.8) = 19 8 59.97 6 4 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1005.8 +/- 37.5
  Background counts = 6.2
  Rate = 0.06 +/- 0.002

[Thu Aug 16 10:15:08 2012] Off-axis axis estimate = 8.03'
[Thu Aug 16 10:35:28 2012] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Thu Aug 16 10:35:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug 16 10:35:28 2012] Initial guess for spatial extent in simple fitting = 10.44"
[Thu Aug 16 10:35:28 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.891
[Thu Aug 16 10:35:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.44"
[Thu Aug 16 10:43:53 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug 16 10:43:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_src1.csv
[Thu Aug 16 10:43:53 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug 16 10:43:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_src1.csv
[Thu Aug 16 10:43:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 10:43:53 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug 16 10:43:53 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug 16 10:43:53 2012] Fit fullrun_mos1_xmm0553640201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug 16 10:53:46 2012] Spatial fit model total counts = 1071.980000, observed total counts = 1026.000000
[Thu Aug 16 10:53:46 2012] Offset between fit and detection position for source 1 = 0.136509 pixels
[Thu Aug 16 10:53:46 2012] 1081.493000 total counts/ 284.713000 bgd. counts: snr = 47.220956
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.136509 pixels
  Position = (223.7, 216.7) = 19 8 59.94 6 4 21.4
  Extent = 6.9 (6.4-7.3)", rotation angle = 0
  Source counts = 796.8 +/- 32.9
  Background counts = 284.7
  Rate = 0.04 +/- 0.002
[Thu Aug 16 10:53:46 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 10:53:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 10:53:46 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 10:53:46 2012] Source does appear to be extended
[Thu Aug 16 10:53:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 11:10:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 16 11:10:53 2012] Initial guess for spatial extent in simple fitting = 6.87"
[Thu Aug 16 11:10:53 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.924
[Thu Aug 16 11:10:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.87"
[Thu Aug 16 11:16:25 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug 16 11:16:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_src1.csv
[Thu Aug 16 11:16:25 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug 16 11:16:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_src1.csv
[Thu Aug 16 11:16:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 16 11:16:25 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug 16 11:16:25 2012] fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug 16 11:16:25 2012] Fit fullrun_mos1_xmm0553640201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug 16 11:25:13 2012] Spatial fit model total counts = 993.168000, observed total counts = 988.000000
[Thu Aug 16 11:25:13 2012] Offset between fit and detection position for source 1 = 0.007633 pixels
[Thu Aug 16 11:25:13 2012] 1001.154000 total counts/ 226.184000 bgd. counts: snr = 51.529265
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.007633 pixels
  Position = (223.7, 216.7) = 19 8 59.94 6 4 21.4
  Extent = 6.6 (6.2-7.1)", rotation angle = 0
  Source counts = 775.0 +/- 31.6
  Background counts = 226.2
  Rate = 0.04 +/- 0.002
[Thu Aug 16 11:25:13 2012] Vigneting correction estimate = 1.000000
[Thu Aug 16 11:25:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 16 11:25:13 2012] Assessing source extent using major axis lower bound
[Thu Aug 16 11:25:13 2012] Source does appear to be extended
[Thu Aug 16 11:25:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 11:42:10 2012] XMMSAS src. selection expression = ellipse(19409.789400, 18807.481200, 398.321411, 398.321411, 0.000000, X, Y)
[Thu Aug 16 11:42:10 2012] Writing source region out to fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug 16 11:42:10 2012] Extracting stamp from image fullrun_mos1_xmm0553640201_pi300-10000_cl_sm2.00.img.gz, (201, 194) - (247, 240)
[Thu Aug 16 11:42:10 2012] XMMSAS bgd. selection expression = annulus(19409.789400, 18807.481200, 663.869019, 1327.738038, X, Y)
[Thu Aug 16 11:42:10 2012] Writing fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src1.gif
[Thu Aug 16 11:42:12 2012] Mean detx,y = (-8895.91, -7425.08) 
[Thu Aug 16 11:42:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 11:42:25 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 11:42:25 2012] Setting source spectrum file to fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug 16 11:42:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug 16 11:51:54 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:51:55 2012] Error reading totcts from fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug 16 11:51:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:51:55 2012] Using photon index=1.80, rate=0.0435, arf fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src1.arf
[Thu Aug 16 11:51:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:51:55 2012] Updating source flux to 1e-12
[Thu Aug 16 11:52:19 2012] Reading fit data from xmm0553640201/analysis//spectral/fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Aug 16 11:52:19 2012] Spectral fit parameter nH value = 1.05745e+22
[Thu Aug 16 11:52:19 2012] Spectral fit parameter PhoIndex value = 10.0
[Thu Aug 16 11:52:19 2012] Failed to get F(0.3-8.0) from xmm0553640201/analysis//spectral/fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Aug 16 11:52:19 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:52:19 2012] Using Nh = 1.1e+22, photon index=10.00, rate=0.0435, arf fullrun_mos1_xmm0553640201_pi300-10000_pass1_cl_src1.arf
[Thu Aug 16 11:52:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:52:19 2012] Updating source flux to 5.7e-13