[Sun Aug 12 10:33:15 2012] Detection parameters:
  Position = (319.5, 308.8) = 22 45 20.34 -46 52 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6338.4 +/- 94.8
  Background counts = 73.5
  Rate = 0.5 +/- 0.007

[Sun Aug 12 10:33:16 2012] Off-axis axis estimate = 1.70'
[Sun Aug 12 11:11:36 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Aug 12 11:11:36 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Aug 12 11:11:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Sun Aug 12 11:11:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Aug 12 11:19:15 2012] fullrun_mos2_xmm0553561501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 12 11:19:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561501_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 11:19:15 2012] fullrun_mos2_xmm0553561501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 12 11:19:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561501_pi300-10000_cl_pass0_src1.csv
[Sun Aug 12 11:19:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553561501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553561501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 11:19:15 2012] fullrun_mos2_xmm0553561501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 12 11:19:15 2012] fullrun_mos2_xmm0553561501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 12 11:19:15 2012] Fit fullrun_mos2_xmm0553561501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 12 11:19:25 2012] Spatial fit model total counts = 2463.550000, observed total counts = 2642.000000
[Sun Aug 12 11:19:25 2012] Offset between fit and detection position for source 1 = 0.372871 pixels
[Sun Aug 12 11:19:25 2012] 2464.027000 total counts/ 268.137000 bgd. counts: snr = 134.101059
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.372871 pixels
  Position = (319.1, 308.9) = 22 45 20.50 -46 52 12.3
  Extent = 6.5 (6.5-6.5)", rotation angle = 0
  Source counts = 2195.9 +/- 49.6
  Background counts = 268.1
  Rate = 0.3 +/- 0.008
[Sun Aug 12 11:19:25 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 11:19:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 11:19:25 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 11:19:25 2012] Source does appear to be extended
[Sun Aug 12 11:19:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 12:06:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 12 12:06:01 2012] Initial guess for spatial extent in simple fitting = 6.48"
[Sun Aug 12 12:06:01 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.010
[Sun Aug 12 12:06:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.48"
[Sun Aug 12 12:13:21 2012] fullrun_mos2_xmm0553561501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 12 12:13:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561501_pi300-10000_cl_pass1_src1.csv
[Sun Aug 12 12:13:21 2012] fullrun_mos2_xmm0553561501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 12 12:13:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561501_pi300-10000_cl_pass1_src1.csv
[Sun Aug 12 12:13:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553561501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553561501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 12 12:13:21 2012] fullrun_mos2_xmm0553561501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 12 12:13:21 2012] fullrun_mos2_xmm0553561501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 12 12:13:21 2012] Fit fullrun_mos2_xmm0553561501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug 12 12:13:29 2012] Spatial fit model total counts = 2719.400000, observed total counts = 2649.000000
[Sun Aug 12 12:13:29 2012] Offset between fit and detection position for source 1 = 0.274489 pixels
[Sun Aug 12 12:13:29 2012] 2738.572000 total counts/ 696.172000 bgd. counts: snr = 77.407408
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.274489 pixels
  Position = (319.3, 308.7) = 22 45 20.41 -46 52 13.1
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2042.4 +/- 52.3
  Background counts = 696.2
  Rate = 0.3 +/- 0.008
[Sun Aug 12 12:13:29 2012] Vigneting correction estimate = 1.000000
[Sun Aug 12 12:13:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 12 12:13:29 2012] Assessing source extent using major axis lower bound
[Sun Aug 12 12:13:29 2012] Source does appear to be extended
[Sun Aug 12 12:13:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 12:43:51 2012] Counts = 2042.400000, rescaling region sizes by 2.000000
[Sun Aug 12 12:43:51 2012] XMMSAS src. selection expression = ellipse(27732.100800, 26806.860400, 655.173619, 655.173619, 0.000000, X, Y)
[Sun Aug 12 12:43:51 2012] Writing source region out to fullrun_mos2_xmm0553561501_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug 12 12:43:51 2012] Extracting stamp from image fullrun_mos2_xmm0553561501_pi300-10000_cl_sm2.00.img.gz, (282, 271) - (357, 346)
[Sun Aug 12 12:43:51 2012] XMMSAS bgd. selection expression = annulus(27732.100800, 26806.860400, 2183.912063, 4367.824126, X, Y)
[Sun Aug 12 12:43:51 2012] Writing fullrun_mos2_xmm0553561501_pi300-10000_pass1_cl_src1.gif
[Sun Aug 12 12:43:53 2012] Mean detx,y = (45.71, 41.46) 
[Sun Aug 12 12:43:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 12:44:25 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 12:44:25 2012] Setting source spectrum file to fullrun_mos2_xmm0553561501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 12:44:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553561501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug 12 12:50:53 2012] Updating aperture counts using extracted products
[Sun Aug 12 12:50:53 2012] Error reading totcts from fullrun_mos2_xmm0553561501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 12:50:53 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 12:50:53 2012] Using photon index=1.80, rate=0.325, arf fullrun_mos2_xmm0553561501_pi300-10000_pass1_cl_src1.arf
[Sun Aug 12 12:50:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 12:50:53 2012] Updating source flux to 3.5e-12
[Sun Aug 12 12:51:35 2012] Reading fit data from xmm0553561501/analysis//spectral/fullrun_mos2_xmm0553561501_pi300-10000_pass1_cl_src1_pl.csv
[Sun Aug 12 12:51:35 2012] Spectral fit parameter nH value = 2.85335e+12
[Sun Aug 12 12:51:35 2012] Spectral fit parameter PhoIndex value = 2.66024
[Sun Aug 12 12:51:35 2012] Failed to get F(0.3-8.0) from xmm0553561501/analysis//spectral/fullrun_mos2_xmm0553561501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Aug 12 12:51:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 12:51:35 2012] Using Nh = 2.9e+12, photon index=2.66, rate=0.325, arf fullrun_mos2_xmm0553561501_pi300-10000_pass1_cl_src1.arf
[Sun Aug 12 12:51:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 12:51:35 2012] Updating source flux to 2.7e-12