[Sat Aug  4 10:09:27 2012] Detection parameters:
  Position = (299.6, 322.1) = 9 53 31.65 39 17 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 506.2 +/- 27.0
  Background counts = 3.4
  Rate = 0.08 +/- 0.004

[Sat Aug  4 10:09:27 2012] Off-axis axis estimate = 1.72'
[Sat Aug  4 10:31:12 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 10:31:12 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Aug  4 10:31:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Sat Aug  4 10:31:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Aug  4 10:46:47 2012] fullrun_mos1_xmm0553561201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug  4 10:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553561201_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 10:46:47 2012] fullrun_mos1_xmm0553561201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug  4 10:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553561201_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 10:46:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553561201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553561201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 10:46:47 2012] fullrun_mos1_xmm0553561201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug  4 10:46:47 2012] fullrun_mos1_xmm0553561201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug  4 10:46:47 2012] Fit fullrun_mos1_xmm0553561201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug  4 11:06:15 2012] Spatial fit model total counts = 462.744000, observed total counts = 462.000000
[Sat Aug  4 11:06:15 2012] Offset between fit and detection position for source 1 = 0.189660 pixels
[Sat Aug  4 11:06:15 2012] 463.174000 total counts/ 127.422000 bgd. counts: snr = 29.743796
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.189660 pixels
  Position = (299.4, 322.1) = 9 53 31.72 39 17 29.4
  Extent = 5.1 (4.6-5.6)", rotation angle = 0
  Source counts = 335.8 +/- 21.5
  Background counts = 127.4
  Rate = 0.05 +/- 0.003
[Sat Aug  4 11:06:15 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 11:06:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 11:06:15 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 11:06:15 2012] Source does appear to be extended
[Sat Aug  4 11:06:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 11:23:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 11:23:56 2012] Initial guess for spatial extent in simple fitting = 5.09"
[Sat Aug  4 11:23:56 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.076
[Sat Aug  4 11:23:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.09"
[Sat Aug  4 11:37:25 2012] fullrun_mos1_xmm0553561201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug  4 11:37:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553561201_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 11:37:25 2012] fullrun_mos1_xmm0553561201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug  4 11:37:25 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553561201_pi300-10000_cl_pass1_src1.csv
[Sat Aug  4 11:37:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553561201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553561201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 11:37:25 2012] fullrun_mos1_xmm0553561201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug  4 11:37:25 2012] fullrun_mos1_xmm0553561201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug  4 11:37:25 2012] Fit fullrun_mos1_xmm0553561201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug  4 11:57:30 2012] Spatial fit model total counts = 462.309000, observed total counts = 462.000000
[Sat Aug  4 11:57:30 2012] Offset between fit and detection position for source 1 = 0.000313 pixels
[Sat Aug  4 11:57:30 2012] 462.766000 total counts/ 127.242000 bgd. counts: snr = 29.744615
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000313 pixels
  Position = (299.4, 322.1) = 9 53 31.72 39 17 29.4
  Extent = 5.1 (4.6-5.6)", rotation angle = 0
  Source counts = 335.5 +/- 21.5
  Background counts = 127.2
  Rate = 0.05 +/- 0.003
[Sat Aug  4 11:57:30 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 11:57:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 11:57:30 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 11:57:30 2012] Source does appear to be extended
[Sat Aug  4 11:57:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 12:46:08 2012] XMMSAS src. selection expression = ellipse(26002.331400, 27978.226000, 305.140209, 305.140209, 0.000000, X, Y)
[Sat Aug  4 12:46:08 2012] Writing source region out to fullrun_mos1_xmm0553561201_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug  4 12:46:08 2012] Extracting stamp from image fullrun_mos1_xmm0553561201_pi300-10000_cl_sm2.00.img.gz, (282, 305) - (317, 340)
[Sat Aug  4 12:46:08 2012] XMMSAS bgd. selection expression = annulus(26002.331400, 27978.226000, 508.567015, 1017.134029, X, Y) && !ellipse(26860.399811, 27827.831421, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug  4 12:46:08 2012] Writing fullrun_mos1_xmm0553561201_pi300-10000_pass1_cl_src1.gif
[Sat Aug  4 12:46:09 2012] Mean detx,y = (421.87, -405.62) 
[Sat Aug  4 12:46:09 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug  4 12:46:13 2012] Binned source spectrum to 10 counts/bin
[Sat Aug  4 12:46:13 2012] Setting source spectrum file to fullrun_mos1_xmm0553561201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug  4 12:46:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553561201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Aug  4 13:00:28 2012] Updating aperture counts using extracted products
[Sat Aug  4 13:00:28 2012] Error reading totcts from fullrun_mos1_xmm0553561201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug  4 13:00:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 13:00:28 2012] Using photon index=1.80, rate=0.0508, arf fullrun_mos1_xmm0553561201_pi300-10000_pass1_cl_src1.arf
[Sat Aug  4 13:00:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 13:00:28 2012] Updating source flux to 6.2e-13
[Sat Aug  4 13:00:38 2012] Reading fit data from xmm0553561201/analysis//spectral/fullrun_mos1_xmm0553561201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Aug  4 13:00:38 2012] Spectral fit parameter nH value = 3.86926e+13
[Sat Aug  4 13:00:38 2012] Spectral fit parameter PhoIndex value = 2.62847
[Sat Aug  4 13:00:38 2012] Failed to get F(0.3-8.0) from xmm0553561201/analysis//spectral/fullrun_mos1_xmm0553561201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Aug  4 13:00:38 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug  4 13:00:38 2012] Using Nh = 3.9e+13, photon index=2.63, rate=0.0508, arf fullrun_mos1_xmm0553561201_pi300-10000_pass1_cl_src1.arf
[Sat Aug  4 13:00:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug  4 13:00:38 2012] Updating source flux to 5e-13