[Sun Jun 24 04:14:45 2012] Detection parameters:
  Position = (462.0, 317.3) = 21 38 26.87 -42 34 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.3 +/- 8.4
  Background counts = 9.0
  Rate = 0.006 +/- 0.001

[Sun Jun 24 04:14:46 2012] Off-axis axis estimate = 11.93'
[Sun Jun 24 04:15:49 2012] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 04:15:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 04:15:49 2012] Initial guess for spatial extent in simple fitting = 12.40"
[Sun Jun 24 04:15:49 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.936
[Sun Jun 24 04:15:49 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.40"
[Sun Jun 24 04:40:52 2012] fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 24 04:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_src5.csv
[Sun Jun 24 04:40:52 2012] fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 24 04:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_src5.csv
[Sun Jun 24 04:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 04:40:52 2012] fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 24 04:40:52 2012] fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 24 04:40:52 2012] Fit fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Jun 24 05:17:18 2012] Spatial fit model total counts = 220.389000, observed total counts = 214.000000
[Sun Jun 24 05:17:18 2012] Offset between fit and detection position for source 5 = 0.280990 pixels
[Sun Jun 24 05:17:18 2012] 217.318300 total counts/ 197.931000 bgd. counts: snr = 1.378036
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.280990 pixels
  Position = (461.7, 317.2) = 21 38 26.98 -42 34 40.3
  Extent = 3.1" x 3.1", rotation angle = 0
  Source counts = 19.4 +/- 14.7
  Background counts = 197.9
  Rate = 0.003 +/- 0.002
  Deleting source due to low Poisson probability