[Sun Jun 24 04:14:45 2012] Detection parameters:
  Position = (427.6, 206.9) = 21 38 40.28 -42 42 41.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 238.6 +/- 18.9
  Background counts = 9.1
  Rate = 0.04 +/- 0.003

[Sun Jun 24 04:14:46 2012] Off-axis axis estimate = 11.48'
[Sun Jun 24 04:15:49 2012] Using EEF radius (= 12.17 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 04:15:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 04:15:49 2012] Initial guess for spatial extent in simple fitting = 12.17"
[Sun Jun 24 04:15:49 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.966
[Sun Jun 24 04:15:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.17"
[Sun Jun 24 04:40:52 2012] fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 24 04:40:52 2012] fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 24 04:40:52 2012] Fit fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun Jun 24 04:40:52 2012] fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 24 04:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun 24 04:40:52 2012] fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 24 04:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun 24 04:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 05:17:18 2012] Spatial fit model total counts = 414.965000, observed total counts = 388.000000
[Sun Jun 24 05:17:18 2012] Offset between fit and detection position for source 1 = 0.095132 pixels
[Sun Jun 24 05:17:18 2012] 415.317000 total counts/ 236.821000 bgd. counts: snr = 11.598942
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.095132 pixels
  Position = (427.6, 206.8) = 21 38 40.30 -42 42 40.9
  Extent = 7.5" x 4.8", rotation angle = 128
  Source counts = 178.5 +/- 20.4
  Background counts = 236.8
  Rate = 0.03 +/- 0.003
[Sun Jun 24 05:17:18 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 05:17:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 05:17:18 2012] Assessing source extent using major
[Sun Jun 24 05:17:18 2012] Source does appear to be extended
[Sun Jun 24 05:17:18 2012] Computing asymmetry using major and minor axis, asym = 1.57
[Sun Jun 24 05:17:18 2012] Source is asymmetric
[Sun Jun 24 05:17:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 05:17:30 2012] Initial guess for spatial extent in simple fitting = 6.13"
[Sun Jun 24 05:17:30 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.824
[Sun Jun 24 05:17:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.13"
[Sun Jun 24 05:37:23 2012] fullrun_pn_xmm0553561101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 24 05:37:23 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553561101_pi300-10000_cl_pass1_src1.csv
[Sun Jun 24 05:37:23 2012] fullrun_pn_xmm0553561101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 24 05:37:23 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553561101_pi300-10000_cl_pass1_src1.csv
[Sun Jun 24 05:37:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553561101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553561101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 05:37:23 2012] fullrun_pn_xmm0553561101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 24 05:37:23 2012] fullrun_pn_xmm0553561101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 24 05:37:23 2012] Fit fullrun_pn_xmm0553561101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 24 06:09:48 2012] Warning, spatial fit 1 centroid is now closest to src. 19
[Sun Jun 24 06:09:48 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 06:09:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 06:09:48 2012] Assessing source extent using major
[Sun Jun 24 06:09:48 2012] Source does appear to be extended
[Sun Jun 24 06:09:48 2012] Computing asymmetry using major and minor axis, asym = 1.57
[Sun Jun 24 06:09:48 2012] Source is asymmetric
[Sun Jun 24 06:10:00 2012] XMMSAS src. selection expression = ellipse(37150.991228, 17945.683940, 449.179615, 285.876145, 127.518215, X, Y)
[Sun Jun 24 06:10:00 2012] Writing source region out to fullrun_pn_xmm0553561101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 24 06:10:00 2012] Extracting stamp from image fullrun_pn_xmm0553561101_pi300-10000_cl_sm2.00.img.gz, (402, 181) - (453, 233)
[Sun Jun 24 06:10:00 2012] XMMSAS bgd. selection expression = annulus(37150.991228, 17945.683940, 748.632691, 1497.265383, X, Y) && !ellipse(35107.834137, 18310.809875, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 06:10:00 2012] Writing fullrun_pn_xmm0553561101_pi300-10000_pass1_cl_src1.gif
[Sun Jun 24 06:10:04 2012] Mean detx,y = (12350.67, 4638.42) 
[Sun Jun 24 06:10:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 06:10:18 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 06:10:18 2012] Setting source spectrum file to fullrun_pn_xmm0553561101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 06:10:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0553561101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 24 06:54:35 2012] Updating aperture counts using extracted products
[Sun Jun 24 06:54:35 2012] Error reading totcts from fullrun_pn_xmm0553561101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 06:54:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 06:54:35 2012] Using photon index=1.80, rate=0.0296, arf fullrun_pn_xmm0553561101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 24 06:54:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 06:54:35 2012] Updating source flux to 1.8e-13
[Sun Jun 24 06:55:51 2012] Reading fit data from xmm0553561101/analysis//spectral/fullrun_pn_xmm0553561101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun 24 06:55:51 2012] Spectral fit parameter nH value = 1.09756e+22
[Sun Jun 24 06:55:51 2012] Spectral fit parameter PhoIndex value = 9.9728
[Sun Jun 24 06:55:51 2012] Failed to get F(0.3-8.0) from xmm0553561101/analysis//spectral/fullrun_pn_xmm0553561101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun 24 06:55:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 06:55:51 2012] Using Nh = 1.1e+22, photon index=9.97, rate=0.0296, arf fullrun_pn_xmm0553561101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 24 06:55:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 06:55:51 2012] Updating source flux to 9.8e-14