[Sun Jun 24 04:15:10 2012] Detection parameters:
  Position = (316.8, 308.1) = 21 39 24.03 -42 35 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 604.8 +/- 29.5
  Background counts = 3.4
  Rate = 0.08 +/- 0.004

[Sun Jun 24 04:15:10 2012] Off-axis axis estimate = 1.51'
[Sun Jun 24 04:54:14 2012] Using EEF radius (= 7.18 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 04:54:14 2012] Initial guess for spatial extent in simple fitting = 7.18"
[Sun Jun 24 04:54:14 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.865
[Sun Jun 24 04:54:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.18"
[Sun Jun 24 05:17:14 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 24 05:17:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 05:17:14 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 24 05:17:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 05:17:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 05:17:14 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 24 05:17:14 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 24 05:17:14 2012] Fit fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 24 05:17:24 2012] Spatial fit model total counts = 587.495000, observed total counts = 575.000000
[Sun Jun 24 05:17:24 2012] Offset between fit and detection position for source 2 = 0.137401 pixels
[Sun Jun 24 05:17:24 2012] 583.964000 total counts/ 175.349000 bgd. counts: snr = 30.857636
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.137401 pixels
  Position = (316.7, 308.2) = 21 39 24.08 -42 35 20.8
  Extent = 5.3 (4.9-5.8)", rotation angle = 0
  Source counts = 408.6 +/- 24.2
  Background counts = 175.3
  Rate = 0.05 +/- 0.003
[Sun Jun 24 05:17:24 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 05:17:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 05:17:24 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 05:17:24 2012] Source does appear to be extended
[Sun Jun 24 05:17:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 05:50:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 05:50:50 2012] Initial guess for spatial extent in simple fitting = 5.32"
[Sun Jun 24 05:50:50 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.010
[Sun Jun 24 05:50:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.32"
[Sun Jun 24 06:09:44 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 24 06:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_src1.csv
[Sun Jun 24 06:09:44 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 24 06:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_src1.csv
[Sun Jun 24 06:09:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 06:09:44 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 24 06:09:44 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 24 06:09:44 2012] Fit fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 24 06:09:53 2012] Spatial fit model total counts = 589.472000, observed total counts = 578.000000
[Sun Jun 24 06:09:53 2012] Offset between fit and detection position for source 2 = 0.007757 pixels
[Sun Jun 24 06:09:53 2012] 589.327000 total counts/ 184.731000 bgd. counts: snr = 29.768140
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.007757 pixels
  Position = (316.7, 308.2) = 21 39 24.08 -42 35 20.8
  Extent = 5.2 (4.8-5.7)", rotation angle = 0
  Source counts = 404.6 +/- 24.3
  Background counts = 184.7
  Rate = 0.05 +/- 0.003
[Sun Jun 24 06:09:53 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 06:09:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 06:09:53 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 06:09:53 2012] Source does appear to be extended
[Sun Jun 24 06:09:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 06:41:42 2012] XMMSAS src. selection expression = ellipse(27503.547000, 26761.273200, 314.668209, 314.668209, 0.000000, X, Y)
[Sun Jun 24 06:41:42 2012] Writing source region out to fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun 24 06:41:42 2012] Extracting stamp from image fullrun_mos2_xmm0553561101_pi300-10000_cl_sm2.00.img.gz, (299, 290) - (335, 326)
[Sun Jun 24 06:41:42 2012] XMMSAS bgd. selection expression = annulus(27503.547000, 26761.273200, 524.447015, 1048.894030, X, Y) && !ellipse(28583.027954, 28617.113220, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 06:41:42 2012] Writing fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src2.gif
[Sun Jun 24 06:41:44 2012] Mean detx,y = (46.58, -235.94) 
[Sun Jun 24 06:41:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 06:41:52 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 06:41:52 2012] Setting source spectrum file to fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 24 06:41:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 24 06:54:36 2012] Updating aperture counts using extracted products
[Sun Jun 24 06:54:36 2012] Error reading totcts from fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 24 06:54:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 06:54:36 2012] Using photon index=1.80, rate=0.0531, arf fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src2.arf
[Sun Jun 24 06:54:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 06:54:36 2012] Updating source flux to 6.9e-13
[Sun Jun 24 06:55:05 2012] Reading fit data from xmm0553561101/analysis//spectral/fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jun 24 06:55:05 2012] Spectral fit parameter nH value = 70340600000.0
[Sun Jun 24 06:55:05 2012] Spectral fit parameter PhoIndex value = 2.55633
[Sun Jun 24 06:55:05 2012] Failed to get F(0.3-8.0) from xmm0553561101/analysis//spectral/fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jun 24 06:55:05 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 06:55:05 2012] Using Nh = 7e+10, photon index=2.56, rate=0.0531, arf fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src2.arf
[Sun Jun 24 06:55:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 06:55:05 2012] Updating source flux to 5.4e-13