[Sun Jun 24 04:15:10 2012] Detection parameters:
  Position = (130.1, 311.7) = 21 40 37.56 -42 35 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.7 +/- 6.3
  Background counts = 2.2
  Rate = 0.003 +/- 0.0008

[Sun Jun 24 04:15:10 2012] Off-axis axis estimate = 12.24'
[Sun Jun 24 04:54:14 2012] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 04:54:14 2012] Initial guess for spatial extent in simple fitting = 12.55"
[Sun Jun 24 04:54:14 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.069
[Sun Jun 24 04:54:14 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 12.55"
[Sun Jun 24 05:17:14 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_src16.ximg exists
[Sun Jun 24 05:17:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_src16.csv
[Sun Jun 24 05:17:14 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Jun 24 05:17:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_src16.csv
[Sun Jun 24 05:17:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 05:17:14 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Jun 24 05:17:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Jun 24 05:17:14 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Jun 24 05:17:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Sun Jun 24 05:17:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553561101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 05:17:24 2012] Spatial fit model total counts = 51.611400, observed total counts = 45.000000
[Sun Jun 24 05:17:24 2012] Offset between fit and detection position for source 10 = 0.497617 pixels
[Sun Jun 24 05:17:24 2012] 51.533100 total counts/ 34.311000 bgd. counts: snr = 2.940150
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.497617 pixels
  Position = (130.6, 311.6) = 21 40 37.37 -42 35 4.6
  Extent = 6.0 (4.1-8.4)", rotation angle = 0
  Source counts = 17.2 +/- 7.2
  Background counts = 34.3
  Rate = 0.002 +/- 0.0009
[Sun Jun 24 05:17:24 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 05:17:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 05:17:24 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 05:17:24 2012] Source does appear to be extended
[Sun Jun 24 05:17:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 05:50:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 05:50:50 2012] Initial guess for spatial extent in simple fitting = 6.00"
[Sun Jun 24 05:50:50 2012] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.637
[Sun Jun 24 05:50:50 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 6.00"
[Sun Jun 24 06:09:44 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jun 24 06:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_src15.csv
[Sun Jun 24 06:09:44 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jun 24 06:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_src15.csv
[Sun Jun 24 06:09:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 06:09:44 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jun 24 06:09:44 2012] fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jun 24 06:09:44 2012] Fit fullrun_mos2_xmm0553561101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Jun 24 06:09:53 2012] Spatial fit model total counts = 48.031300, observed total counts = 44.000000
[Sun Jun 24 06:09:53 2012] Offset between fit and detection position for source 10 = 0.020063 pixels
[Sun Jun 24 06:09:53 2012] 48.500600 total counts/ 31.363300 bgd. counts: snr = 3.060071
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.020063 pixels
  Position = (130.6, 311.6) = 21 40 37.38 -42 35 4.7
  Extent = 6.0 (4.0-8.4)", rotation angle = 0
  Source counts = 17.1 +/- 7.0
  Background counts = 31.4
  Rate = 0.002 +/- 0.0009
[Sun Jun 24 06:09:53 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 06:09:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 06:09:53 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 06:09:53 2012] Source does appear to be extended
[Sun Jun 24 06:09:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 06:41:42 2012] XMMSAS src. selection expression = ellipse(11313.414800, 27059.459400, 360.946110, 360.946110, 0.000000, X, Y)
[Sun Jun 24 06:41:42 2012] Writing source region out to fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun 24 06:41:42 2012] Extracting stamp from image fullrun_mos2_xmm0553561101_pi300-10000_cl_sm2.00.img.gz, (110, 291) - (151, 332)
[Sun Jun 24 06:41:42 2012] XMMSAS bgd. selection expression = annulus(11313.414800, 27059.459400, 601.576849, 1203.153698, X, Y)
[Sun Jun 24 06:41:42 2012] Writing fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src10.gif
[Sun Jun 24 06:44:05 2012] Mean detx,y = (15110.86, -6170.09) 
[Sun Jun 24 06:44:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 06:44:18 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 06:44:18 2012] Setting source spectrum file to fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 24 06:44:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun 24 06:53:58 2012] Not generating rmf since there are only 17 counts
[Sun Jun 24 06:53:58 2012] rmf not generated due to insufficient counts
[Sun Jun 24 06:54:36 2012] Updating aperture counts using extracted products
[Sun Jun 24 06:54:36 2012] Error reading totcts from fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 24 06:54:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 06:54:36 2012] Using photon index=1.80, rate=0.00225, arf fullrun_mos2_xmm0553561101_pi300-10000_pass1_cl_src10.arf
[Sun Jun 24 06:54:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 06:54:36 2012] Updating source flux to 8.4e-14
[Sun Jun 24 06:54:52 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting