[Tue Aug  7 20:34:20 2012] Detection parameters:
  Position = (313.3, 335.4) = 13 19 2.29 31 13 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 311.3 +/- 22.3
  Background counts = 38.7
  Rate = 0.04 +/- 0.003

[Tue Aug  7 20:34:20 2012] Off-axis axis estimate = 2.89'
[Tue Aug  7 20:37:17 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 20:37:17 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Tue Aug  7 20:37:17 2012] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.031
[Tue Aug  7 20:37:17 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.87"
[Tue Aug  7 20:58:22 2012] fullrun_pn_xmm0553561001_pi300-10000_cl_pass0_src3.ximg exists
[Tue Aug  7 20:58:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553561001_pi300-10000_cl_pass0_src3.csv
[Tue Aug  7 20:58:22 2012] fullrun_pn_xmm0553561001_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Aug  7 20:58:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553561001_pi300-10000_cl_pass0_src3.csv
[Tue Aug  7 20:58:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553561001_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553561001_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 20:58:23 2012] fullrun_pn_xmm0553561001_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Aug  7 20:58:23 2012] fullrun_pn_xmm0553561001_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Aug  7 20:58:23 2012] Fit fullrun_pn_xmm0553561001_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Aug  7 21:22:30 2012] Spatial fit model total counts = 289.045000, observed total counts = 277.000000
[Tue Aug  7 21:22:30 2012] Offset between fit and detection position for source 3 = 0.138790 pixels
[Tue Aug  7 21:22:30 2012] 294.392000 total counts/ 120.626000 bgd. counts: snr = 15.821379
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.138790 pixels
  Position = (313.2, 335.4) = 13 19 2.33 31 13 17.3
  Extent = 5.0 (4.3-5.7)", rotation angle = 0
  Source counts = 173.8 +/- 17.2
  Background counts = 120.6
  Rate = 0.03 +/- 0.003
[Tue Aug  7 21:22:31 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 21:22:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 21:22:31 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 21:22:31 2012] Source does appear to be extended
[Tue Aug  7 21:22:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 21:22:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 21:22:39 2012] Initial guess for spatial extent in simple fitting = 4.99"
[Tue Aug  7 21:22:39 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.830
[Tue Aug  7 21:22:39 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.99"
[Tue Aug  7 21:38:42 2012] fullrun_pn_xmm0553561001_pi300-10000_cl_pass1_src3.ximg exists
[Tue Aug  7 21:38:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553561001_pi300-10000_cl_pass1_src3.csv
[Tue Aug  7 21:38:42 2012] fullrun_pn_xmm0553561001_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Aug  7 21:38:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553561001_pi300-10000_cl_pass1_src3.csv
[Tue Aug  7 21:38:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553561001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553561001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 21:38:42 2012] fullrun_pn_xmm0553561001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Aug  7 21:38:42 2012] fullrun_pn_xmm0553561001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Aug  7 21:38:42 2012] Fit fullrun_pn_xmm0553561001_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Aug  7 21:57:51 2012] Spatial fit model total counts = 289.005000, observed total counts = 277.000000
[Tue Aug  7 21:57:51 2012] Offset between fit and detection position for source 3 = 0.000657 pixels
[Tue Aug  7 21:57:51 2012] 294.358000 total counts/ 120.800000 bgd. counts: snr = 15.791056
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000657 pixels
  Position = (313.2, 335.4) = 13 19 2.33 31 13 17.3
  Extent = 5.0 (4.3-5.7)", rotation angle = 0
  Source counts = 173.6 +/- 17.2
  Background counts = 120.8
  Rate = 0.03 +/- 0.003
[Tue Aug  7 21:57:51 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 21:57:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 21:57:51 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 21:57:51 2012] Source does appear to be extended
[Tue Aug  7 21:57:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 21:57:59 2012] XMMSAS src. selection expression = ellipse(27197.227560, 29129.998000, 298.488009, 298.488009, 0.000000, X, Y)
[Tue Aug  7 21:57:59 2012] Writing source region out to fullrun_pn_xmm0553561001_pi300-10000_pass1_cl_src3_src.reg
[Tue Aug  7 21:57:59 2012] Extracting stamp from image fullrun_pn_xmm0553561001_pi300-10000_cl_sm2.00.img.gz, (296, 318) - (330, 353)
[Tue Aug  7 21:57:59 2012] XMMSAS bgd. selection expression = annulus(27197.227560, 29129.998000, 497.480014, 994.960029, X, Y) && !ellipse(25682.785461, 28416.873566, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug  7 21:57:59 2012] Writing fullrun_pn_xmm0553561001_pi300-10000_pass1_cl_src3.gif
[Tue Aug  7 22:01:39 2012] Mean detx,y = (-4169.86, 2986.82) 
[Tue Aug  7 22:01:41 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug  7 22:01:54 2012] Binned source spectrum to 10 counts/bin
[Tue Aug  7 22:01:54 2012] Setting source spectrum file to fullrun_pn_xmm0553561001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Aug  7 22:01:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0553561001_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Aug  7 23:15:40 2012] Updating aperture counts using extracted products
[Tue Aug  7 23:15:40 2012] Error reading totcts from fullrun_pn_xmm0553561001_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Aug  7 23:15:41 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 23:15:41 2012] Using photon index=1.80, rate=0.0282, arf fullrun_pn_xmm0553561001_pi300-10000_pass1_cl_src3.arf
[Tue Aug  7 23:15:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 23:15:41 2012] Updating source flux to 1.1e-13
[Tue Aug  7 23:16:14 2012] Reading fit data from xmm0553561001/analysis//spectral/fullrun_pn_xmm0553561001_pi300-10000_pass1_cl_src3_pl.csv
[Tue Aug  7 23:16:14 2012] Spectral fit parameter nH value = 1.62278e+21
[Tue Aug  7 23:16:14 2012] Spectral fit parameter PhoIndex value = 1.77425
[Tue Aug  7 23:16:14 2012] Failed to get F(0.3-8.0) from xmm0553561001/analysis//spectral/fullrun_pn_xmm0553561001_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Aug  7 23:16:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 23:16:14 2012] Using Nh = 1.6e+21, photon index=1.77, rate=0.0282, arf fullrun_pn_xmm0553561001_pi300-10000_pass1_cl_src3.arf
[Tue Aug  7 23:16:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 23:16:14 2012] Updating source flux to 1.6e-13