[Wed Jun 20 10:18:10 2012] Detection parameters:
  Position = (449.3, 429.0) = 18 50 25.57 -6 8 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.2 +/- 12.6
  Background counts = 15.4
  Rate = 0.003 +/- 0.0005

[Wed Jun 20 10:18:10 2012] Off-axis axis estimate = 14.47'
[Wed Jun 20 10:41:16 2012] Using EEF radius (= 13.66 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 10:41:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 10:41:16 2012] Initial guess for spatial extent in simple fitting = 13.66"
[Wed Jun 20 10:41:16 2012] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.056
[Wed Jun 20 10:41:16 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.66"
[Wed Jun 20 10:48:04 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun 20 10:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_src3.csv
[Wed Jun 20 10:48:04 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun 20 10:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_src3.csv
[Wed Jun 20 10:48:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 10:48:04 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun 20 10:48:04 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun 20 10:48:04 2012] Fit fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jun 20 10:59:37 2012] Spatial fit model total counts = 278.000000, observed total counts = 278.000000
[Wed Jun 20 10:59:37 2012] Offset between fit and detection position for source 5 = 0.390138 pixels
[Wed Jun 20 10:59:37 2012] 277.862900 total counts/ 225.624000 bgd. counts: snr = 3.477774
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.390138 pixels
  Position = (448.9, 429.0) = 18 50 25.68 -6 8 2.1
  Extent = 4.9 (4.0-6.5)", rotation angle = 0
  Source counts = 52.2 +/- 16.7
  Background counts = 225.6
  Rate = 0.002 +/- 0.0007
[Wed Jun 20 10:59:37 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 10:59:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 10:59:37 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 10:59:37 2012] Source does appear to be extended
[Wed Jun 20 10:59:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 11:19:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 20 11:19:13 2012] Initial guess for spatial extent in simple fitting = 4.89"
[Wed Jun 20 11:19:13 2012] source mask rpix=1.1, npix_max = 10, mask sum = 16, frac = 1.516
[Wed Jun 20 11:19:13 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.89"
[Wed Jun 20 11:28:30 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jun 20 11:28:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_src3.csv
[Wed Jun 20 11:28:30 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jun 20 11:28:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_src3.csv
[Wed Jun 20 11:28:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 11:28:30 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jun 20 11:28:30 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jun 20 11:28:30 2012] Fit fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jun 20 11:39:51 2012] Spatial fit model total counts = 225.000000, observed total counts = 225.000000
[Wed Jun 20 11:39:51 2012] Offset between fit and detection position for source 5 = 0.015454 pixels
[Wed Jun 20 11:39:51 2012] 223.917900 total counts/ 173.012000 bgd. counts: snr = 3.870170
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.015454 pixels
  Position = (449.0, 429.0) = 18 50 25.68 -6 8 2.2
  Extent = 4.9 (3.9-6.3)", rotation angle = 0
  Source counts = 50.9 +/- 15.0
  Background counts = 173.0
  Rate = 0.002 +/- 0.0006
[Wed Jun 20 11:39:51 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 11:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 11:39:51 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 11:39:51 2012] Source does appear to be extended
[Wed Jun 20 11:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 11:53:35 2012] XMMSAS src. selection expression = ellipse(39011.055660, 37273.716600, 292.565408, 292.565408, 0.000000, X, Y)
[Wed Jun 20 11:53:35 2012] Writing source region out to fullrun_mos1_xmm0553510801_pi300-10000_pass1_cl_src5_src.reg
[Wed Jun 20 11:53:35 2012] Extracting stamp from image fullrun_mos1_xmm0553510801_pi300-10000_cl_sm2.00.img.gz, (432, 412) - (466, 446)
[Wed Jun 20 11:53:35 2012] XMMSAS bgd. selection expression = annulus(39011.055660, 37273.716600, 487.609014, 975.218028, X, Y)
[Wed Jun 20 11:53:35 2012] Writing fullrun_mos1_xmm0553510801_pi300-10000_pass1_cl_src5.gif
[Wed Jun 20 11:54:13 2012] Mean detx,y = (11648.31, 10021.29) 
[Wed Jun 20 11:54:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 11:54:27 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 11:54:27 2012] Setting source spectrum file to fullrun_mos1_xmm0553510801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jun 20 11:54:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553510801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jun 20 11:59:27 2012] Not generating rmf since there are only 50 counts
[Wed Jun 20 11:59:27 2012] rmf not generated due to insufficient counts
[Wed Jun 20 12:07:46 2012] Updating aperture counts using extracted products
[Wed Jun 20 12:07:46 2012] Error reading totcts from fullrun_mos1_xmm0553510801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jun 20 12:07:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 12:07:46 2012] Using photon index=1.80, rate=0.00202, arf fullrun_mos1_xmm0553510801_pi300-10000_pass1_cl_src5.arf
[Wed Jun 20 12:07:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 12:07:46 2012] Updating source flux to 5.9e-14
[Wed Jun 20 12:07:49 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting