[Wed Jun 20 10:18:10 2012] Detection parameters:
  Position = (489.0, 383.7) = 18 50 13.99 -6 11 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.3 +/- 12.1
  Background counts = 11.9
  Rate = 0.003 +/- 0.0005

[Wed Jun 20 10:18:10 2012] Off-axis axis estimate = 15.14'
[Wed Jun 20 10:41:16 2012] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 10:41:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 10:41:16 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Wed Jun 20 10:41:16 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.013
[Wed Jun 20 10:41:16 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 14.00"
[Wed Jun 20 10:48:04 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jun 20 10:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_src4.csv
[Wed Jun 20 10:48:04 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jun 20 10:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_src4.csv
[Wed Jun 20 10:48:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 10:48:04 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jun 20 10:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 20 10:48:04 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jun 20 10:48:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jun 20 10:48:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553510801_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 10:59:37 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.508943 pixels away
[Wed Jun 20 10:59:37 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 10:59:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 10:59:37 2012] Assessing source extent using major
[Wed Jun 20 10:59:37 2012] Source does appear to be extended
[Wed Jun 20 10:59:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 11:19:13 2012] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 11:19:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 11:19:13 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Wed Jun 20 11:19:13 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.013
[Wed Jun 20 11:19:13 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 14.00"
[Wed Jun 20 11:28:30 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jun 20 11:28:30 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jun 20 11:28:30 2012] Fit fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Jun 20 11:28:30 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jun 20 11:28:30 2012] fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jun 20 11:28:30 2012] Fit fullrun_mos1_xmm0553510801_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jun 20 11:39:51 2012] Spatial fit model total counts = 210.596000, observed total counts = 209.000000
[Wed Jun 20 11:39:51 2012] Offset between fit and detection position for source 1 = 0.262295 pixels
[Wed Jun 20 11:39:51 2012] 210.191700 total counts/ 161.702000 bgd. counts: snr = 3.813219
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.262295 pixels
  Position = (488.8, 383.6) = 18 50 14.06 -6 11 19.6
  Extent = 4.7 (3.5-6.3)", rotation angle = 0
  Source counts = 48.5 +/- 14.5
  Background counts = 161.7
  Rate = 0.002 +/- 0.0006
[Wed Jun 20 11:39:51 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 11:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 11:39:51 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 11:39:51 2012] Source does appear to be extended
[Wed Jun 20 11:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 11:53:36 2012] XMMSAS src. selection expression = ellipse(42475.226400, 33323.021600, 279.699608, 279.699608, 0.000000, X, Y)
[Wed Jun 20 11:53:36 2012] Writing source region out to fullrun_mos1_xmm0553510801_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 20 11:53:36 2012] Extracting stamp from image fullrun_mos1_xmm0553510801_pi300-10000_cl_sm2.00.img.gz, (473, 368) - (505, 400)
[Wed Jun 20 11:53:36 2012] XMMSAS bgd. selection expression = annulus(42475.226400, 33323.021600, 466.166013, 932.332027, X, Y)
[Wed Jun 20 11:53:36 2012] Writing fullrun_mos1_xmm0553510801_pi300-10000_pass1_cl_src1.gif
[Wed Jun 20 11:54:32 2012] Mean detx,y = (8224.76, 14003.47) 
[Wed Jun 20 11:54:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 11:54:45 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 11:54:45 2012] Setting source spectrum file to fullrun_mos1_xmm0553510801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 20 11:54:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553510801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 20 11:59:37 2012] Not generating rmf since there are only 48 counts
[Wed Jun 20 11:59:37 2012] rmf not generated due to insufficient counts
[Wed Jun 20 12:07:46 2012] Updating aperture counts using extracted products
[Wed Jun 20 12:07:46 2012] Error reading totcts from fullrun_mos1_xmm0553510801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 20 12:07:46 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 12:07:46 2012] Using photon index=1.80, rate=0.00192, arf fullrun_mos1_xmm0553510801_pi300-10000_pass1_cl_src1.arf
[Wed Jun 20 12:07:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 12:07:46 2012] Updating source flux to 5.6e-14
[Wed Jun 20 12:07:49 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting