[Wed May 15 01:02:29 2013] Detection parameters:
  Position = (432.8, 343.1) = 7 37 37.94 21 39 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 381.8 +/- 30.9
  Background counts = 247.1
  Rate = 0.01 +/- 0.001

[Wed May 15 01:02:30 2013] Off-axis axis estimate = 10.26'
[Wed May 15 01:06:47 2013] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Wed May 15 01:06:47 2013] Initial guess for spatial extent in simple fitting = 11.56"
[Wed May 15 01:06:47 2013] source mask rpix=2.7, npix_max = 39, mask sum = 25, frac = 0.627
[Wed May 15 01:06:47 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 11.56"
[Wed May 15 01:25:13 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_src2.ximg exists
[Wed May 15 01:25:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_src2.csv
[Wed May 15 01:25:13 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed May 15 01:25:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_src2.csv
[Wed May 15 01:25:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 01:25:13 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed May 15 01:25:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May 15 01:25:13 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed May 15 01:25:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed May 15 01:25:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 02:02:09 2013] Warning, spatial fit 2 centroid is now closest to src. 7
[Wed May 15 02:02:09 2013] Vigneting correction estimate = 1.000000
[Wed May 15 02:02:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 02:02:09 2013] Assessing source extent using major
[Wed May 15 02:02:09 2013] Source does appear to be extended
[Wed May 15 02:02:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 02:02:25 2013] Using EEF radius (= 11.56 ")to estimate initial spatial extent for simple fitting
[Wed May 15 02:02:25 2013] Initial guess for spatial extent in simple fitting = 11.56"
[Wed May 15 02:02:25 2013] source mask rpix=2.7, npix_max = 39, mask sum = 25, frac = 0.627
[Wed May 15 02:02:25 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 11.56"
[Wed May 15 02:17:05 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_src2.ximg exists
[Wed May 15 02:17:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_src2.csv
[Wed May 15 02:17:05 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed May 15 02:17:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_src2.csv
[Wed May 15 02:17:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 02:17:05 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed May 15 02:17:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May 15 02:17:05 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed May 15 02:17:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed May 15 02:17:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 02:56:57 2013] Source 3 is offset by 7.715075 and -6.289983 pixels which is larger than
2 X fitted extent = 1.328791 x 1.328791, not incorporating fit results
[Wed May 15 02:56:57 2013] Vigneting correction estimate = 1.000000
[Wed May 15 02:56:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 02:56:57 2013] Assessing source extent using major
[Wed May 15 02:56:57 2013] Source does appear to be extended
[Wed May 15 02:56:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 02:57:13 2013] XMMSAS src. selection expression = ellipse(37604.047546, 29798.407440, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 15 02:57:13 2013] Writing source region out to fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src3_src.reg
[Wed May 15 02:57:13 2013] Extracting stamp from image fullrun_pn_xmm0553510701_pi300-10000_cl_sm2.00.img.gz, (395, 306) - (470, 381)
[Wed May 15 02:57:13 2013] XMMSAS bgd. selection expression = annulus(37604.047546, 29798.407440, 1087.500000, 2175.000000, X, Y) && !ellipse(36219.730200, 28449.010400, 616.332018, 318.976809, 90.633106, X, Y)
[Wed May 15 02:57:13 2013] Writing fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src3.gif
[Wed May 15 02:59:12 2013] Mean detx,y = (-13291.57, 3298.42) 
[Wed May 15 02:59:17 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 03:00:11 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 03:00:11 2013] Setting source spectrum file to fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May 15 03:00:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May 15 03:09:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 15 03:09:18 2013] rmf not generated due to insufficient counts
[Wed May 15 03:33:09 2013] Updating aperture counts using extracted products
[Wed May 15 03:33:09 2013] Total counts from fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 312.00
[Wed May 15 03:33:09 2013] Total counts from fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1837.00
[Wed May 15 03:33:09 2013] Got source and background scale factors 1102272.000000, 10252627.000000
[Wed May 15 03:33:09 2013] User source parameters:
  Position = (432.8, 343.1) = 7 37 37.94 21 39 11.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 114.5 +/- 18.7
  Background aperture counts = 197.5
  Rate = 0.01 +/- 0.002

[Wed May 15 03:33:09 2013] Updating counts from extracted products
[Wed May 15 03:33:09 2013] Set source signif. to 114.50/14.05 = 8.15
[Wed May 15 03:33:11 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 03:33:11 2013] Using photon index=1.80, rate=0.0104, arf fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src3.arf
[Wed May 15 03:33:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 03:33:11 2013] Updating source flux to 1.1e-13
[Wed May 15 03:33:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 03:33:21 2013] xmm0553510701/analysis//spectral/fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete