[Wed May 15 01:02:29 2013] Detection parameters:
  Position = (373.4, 166.8) = 7 37 56.50 21 26 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 333.4 +/- 30.3
  Background counts = 220.0
  Rate = 0.01 +/- 0.001

[Wed May 15 01:02:30 2013] Off-axis axis estimate = 10.98'
[Wed May 15 01:06:47 2013] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Wed May 15 01:06:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 01:06:47 2013] Initial guess for spatial extent in simple fitting = 11.92"
[Wed May 15 01:06:47 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.000
[Wed May 15 01:06:47 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.92"
[Wed May 15 01:25:13 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 15 01:25:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_src1.csv
[Wed May 15 01:25:13 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 15 01:25:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_src1.csv
[Wed May 15 01:25:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 01:25:13 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 15 01:25:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 15 01:25:13 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 15 01:25:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 15 01:25:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553510701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 02:02:09 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.666662 pixels away
[Wed May 15 02:02:09 2013] Vigneting correction estimate = 1.000000
[Wed May 15 02:02:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 02:02:09 2013] Assessing source extent using major
[Wed May 15 02:02:09 2013] Source does appear to be extended
[Wed May 15 02:02:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 02:02:25 2013] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Wed May 15 02:02:25 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 02:02:25 2013] Initial guess for spatial extent in simple fitting = 11.92"
[Wed May 15 02:02:25 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.000
[Wed May 15 02:02:25 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.92"
[Wed May 15 02:17:05 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 15 02:17:05 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 15 02:17:05 2013] Fit fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed May 15 02:17:05 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 15 02:17:05 2013] fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 15 02:17:05 2013] Fit fullrun_pn_xmm0553510701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 15 02:56:57 2013] Spatial fit model total counts = 818.843000, observed total counts = 747.000000
[Wed May 15 02:56:57 2013] Offset between fit and detection position for source 2 = 0.222341 pixels
[Wed May 15 02:56:57 2013] 817.834000 total counts/ 712.785000 bgd. counts: snr = 3.934709
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.222341 pixels
  Position = (373.2, 166.7) = 7 37 56.56 21 26 24.7
  Extent = 6.5 (5.1-8.6)" x 3.1 (3.0-3.9)", rotation angle = 314 (301-327) degrees
  Source counts = 105.0 +/- 28.6
  Background counts = 712.8
  Rate = 0.01 +/- 0.003
[Wed May 15 02:56:57 2013] Vigneting correction estimate = 1.000000
[Wed May 15 02:56:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 02:56:57 2013] Assessing source extent using major axis lower bound
[Wed May 15 02:56:57 2013] Source does appear to be extended
[Wed May 15 02:56:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.30
[Wed May 15 02:57:13 2013] XMMSAS src. selection expression = ellipse(32422.687000, 14453.001400, 390.345611, 185.952605, 313.542300, X, Y)
[Wed May 15 02:57:13 2013] Writing source region out to fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src2_src.reg
[Wed May 15 02:57:13 2013] Extracting stamp from image fullrun_pn_xmm0553510701_pi300-10000_cl_sm2.00.img.gz, (351, 144) - (396, 189)
[Wed May 15 02:57:13 2013] XMMSAS bgd. selection expression = annulus(32422.687000, 14453.001400, 650.576019, 1301.152037, X, Y)
[Wed May 15 02:57:13 2013] Writing fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src2.gif
[Wed May 15 02:58:28 2013] Mean detx,y = (-5526.77, -10928.81) 
[Wed May 15 02:58:33 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 02:58:54 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 02:58:54 2013] Setting source spectrum file to fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 15 02:58:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 15 03:33:08 2013] Updating aperture counts using extracted products
[Wed May 15 03:33:09 2013] Total counts from fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 126.00
[Wed May 15 03:33:09 2013] Total counts from fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src2_bgd.pi.gz = 717.00
[Wed May 15 03:33:09 2013] Got source and background scale factors 228800.000000, 3532061.000000
[Wed May 15 03:33:09 2013] User source parameters:
  Position = (373.2, 166.7) = 7 37 56.56 21 26 24.7
  Extent = 6.5 (5.1-8.6)" x 3.1 (3.0-3.9)", rotation angle = 314 (301-327) degrees
  Source aperture counts = 79.6 +/- 12.3
  Background aperture counts = 46.4
  Rate = 0.007 +/- 0.001

[Wed May 15 03:33:11 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 03:33:11 2013] Using photon index=1.80, rate=0.00958, arf fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src2.arf
[Wed May 15 03:33:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 03:33:11 2013] Updating source flux to 9.5e-14
[Wed May 15 03:33:21 2013] xmm0553510701/analysis//spectral/fullrun_pn_xmm0553510701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete