[Thu Jun 27 01:12:06 2013] Detection parameters:
  Position = (144.7, 292.0) = 7 3 22.81 -8 22 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.7 +/- 13.1
  Background counts = 25.8
  Rate = 0.008 +/- 0.001

[Thu Jun 27 01:12:07 2013] Off-axis axis estimate = 11.15'
[Thu Jun 27 01:44:34 2013] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Thu Jun 27 01:44:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 27 01:44:34 2013] Initial guess for spatial extent in simple fitting = 12.01"
[Thu Jun 27 01:44:34 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.988
[Thu Jun 27 01:44:34 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.01"
[Thu Jun 27 01:55:07 2013] fullrun_mos2_xmm0553510401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 27 01:55:07 2013] fullrun_mos2_xmm0553510401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 27 01:55:07 2013] Fit fullrun_mos2_xmm0553510401_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Jun 27 01:55:07 2013] fullrun_mos2_xmm0553510401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 27 01:55:07 2013] fullrun_mos2_xmm0553510401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 27 01:55:07 2013] Fit fullrun_mos2_xmm0553510401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 27 01:55:13 2013] Spatial fit model total counts = 523.466000, observed total counts = 476.000000
[Thu Jun 27 01:55:13 2013] Offset between fit and detection position for source 3 = 0.306790 pixels
[Thu Jun 27 01:55:13 2013] 521.898600 total counts/ 483.879000 bgd. counts: snr = 1.728380
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.306790 pixels
  Position = (144.8, 291.7) = 7 3 22.79 -8 22 7.4
  Extent = 3.0" x 3.0", rotation angle = 0
  Source counts = 38.0 +/- 22.8
  Background counts = 483.9
  Rate = 0.002 +/- 0.001
[Thu Jun 27 01:55:13 2013] Vigneting correction estimate = 1.000000
[Thu Jun 27 01:55:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 27 01:55:13 2013] Assessing source extent using major
[Thu Jun 27 01:55:13 2013] Source does appear to be extended
[Thu Jun 27 01:55:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 27 02:27:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 27 02:27:07 2013] Initial guess for spatial extent in simple fitting = 3.00"
[Thu Jun 27 02:27:07 2013] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.059
[Thu Jun 27 02:27:07 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 3.00"
[Thu Jun 27 02:35:13 2013] fullrun_mos2_xmm0553510401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 27 02:35:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553510401_pi300-10000_cl_pass1_src1.csv
[Thu Jun 27 02:35:13 2013] fullrun_mos2_xmm0553510401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 27 02:35:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553510401_pi300-10000_cl_pass1_src1.csv
[Thu Jun 27 02:35:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553510401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553510401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 02:35:14 2013] fullrun_mos2_xmm0553510401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 27 02:35:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553510401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 27 02:35:14 2013] fullrun_mos2_xmm0553510401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 27 02:35:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553510401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 27 02:35:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553510401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553510401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 02:35:19 2013] Spatial fit model total counts = 291.710000, observed total counts = 264.000000
[Thu Jun 27 02:35:19 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 27 02:35:19 2013] Vigneting correction estimate = 1.000000
[Thu Jun 27 02:35:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 27 02:35:19 2013] Assessing source extent using major
[Thu Jun 27 02:35:19 2013] Source does appear to be extended
[Thu Jun 27 02:35:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 27 02:43:07 2013] XMMSAS src. selection expression = ellipse(12546.730600, 25326.581800, 180.083405, 180.083405, 0.000000, X, Y)
[Thu Jun 27 02:43:07 2013] Writing source region out to fullrun_mos2_xmm0553510401_pi300-10000_pass1_cl_src3_src.reg
[Thu Jun 27 02:43:07 2013] Extracting stamp from image fullrun_mos2_xmm0553510401_pi300-10000_cl_sm2.00.img.gz, (134, 281) - (155, 302)
[Thu Jun 27 02:43:07 2013] XMMSAS bgd. selection expression = annulus(12546.730600, 25326.581800, 300.139009, 600.278017, X, Y)
[Thu Jun 27 02:43:07 2013] Writing fullrun_mos2_xmm0553510401_pi300-10000_pass1_cl_src3.gif
[Thu Jun 27 02:43:09 2013] Mean detx,y = (-12093.68, -51.42) 
[Thu Jun 27 02:43:10 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 27 02:43:15 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 27 02:43:15 2013] Setting source spectrum file to fullrun_mos2_xmm0553510401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jun 27 02:43:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553510401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jun 27 02:45:03 2013] Not generating rmf since there are only 38 counts
[Thu Jun 27 02:45:03 2013] rmf not generated due to insufficient counts
[Thu Jun 27 02:46:22 2013] Updating aperture counts using extracted products
[Thu Jun 27 02:46:22 2013] Total counts from fullrun_mos2_xmm0553510401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 50.00
[Thu Jun 27 02:46:22 2013] Total counts from fullrun_mos2_xmm0553510401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 115.00
[Thu Jun 27 02:46:22 2013] Got source and background scale factors 104000.000000, 836908.000000
[Thu Jun 27 02:46:22 2013] User source parameters:
  Position = (144.8, 291.7) = 7 3 22.79 -8 22 7.4
  Extent = 3.0" x 3.0", rotation angle = 0
  Source aperture counts = 35.7 +/- 8.1
  Background aperture counts = 14.3
  Rate = 0.002 +/- 0.0004

[Thu Jun 27 02:46:23 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 27 02:46:23 2013] Using photon index=1.80, rate=0.00184, arf fullrun_mos2_xmm0553510401_pi300-10000_pass1_cl_src3.arf
[Thu Jun 27 02:46:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 27 02:46:23 2013] Updating source flux to 9.6e-14
[Thu Jun 27 02:46:25 2013] Flag p found in src. 3 procflags, skipping spectral fitting
[Thu Jun 27 02:46:25 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 27 02:46:26 2013] xmm0553510401/analysis//spectral/fullrun_mos2_xmm0553510401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete