[Thu Jun 27 01:11:48 2013] Detection parameters:
  Position = (356.8, 309.5) = 7 2 20.63 -8 20 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.7 +/- 12.1
  Background counts = 37.9
  Rate = 0.005 +/- 0.0009

[Thu Jun 27 01:11:48 2013] Off-axis axis estimate = 4.31'
[Thu Jun 27 01:39:02 2013] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Thu Jun 27 01:39:02 2013] Initial guess for spatial extent in simple fitting = 8.58"
[Thu Jun 27 01:39:02 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Thu Jun 27 01:39:02 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.58"
[Thu Jun 27 01:44:34 2013] fullrun_mos1_xmm0553510401_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 27 01:44:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553510401_pi300-10000_cl_pass0_src3.csv
[Thu Jun 27 01:44:34 2013] fullrun_mos1_xmm0553510401_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 27 01:44:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553510401_pi300-10000_cl_pass0_src3.csv
[Thu Jun 27 01:44:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553510401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553510401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 01:44:34 2013] fullrun_mos1_xmm0553510401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 27 01:44:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553510401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 27 01:44:34 2013] fullrun_mos1_xmm0553510401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 27 01:44:34 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553510401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun 27 01:44:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553510401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553510401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 01:55:11 2013] Spatial fit model total counts = -40.165800, observed total counts = 306.000000
[Thu Jun 27 01:55:11 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 27 01:55:11 2013] Vigneting correction estimate = 1.000000
[Thu Jun 27 01:55:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 27 01:55:11 2013] Assessing source extent using major
[Thu Jun 27 01:55:11 2013] Source does appear to be extended
[Thu Jun 27 01:55:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 27 02:22:42 2013] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Thu Jun 27 02:22:42 2013] Initial guess for spatial extent in simple fitting = 8.58"
[Thu Jun 27 02:22:42 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.022
[Thu Jun 27 02:22:42 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.58"
[Thu Jun 27 02:27:06 2013] fullrun_mos1_xmm0553510401_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jun 27 02:27:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510401_pi300-10000_cl_pass1_src2.csv
[Thu Jun 27 02:27:06 2013] fullrun_mos1_xmm0553510401_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jun 27 02:27:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510401_pi300-10000_cl_pass1_src2.csv
[Thu Jun 27 02:27:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553510401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553510401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 02:27:06 2013] fullrun_mos1_xmm0553510401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jun 27 02:27:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jun 27 02:27:06 2013] fullrun_mos1_xmm0553510401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jun 27 02:27:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Jun 27 02:27:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553510401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553510401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 27 02:35:18 2013] Source 4 is offset by 8.344482 and -2.521480 pixels which is larger than
2 X fitted extent = 0.986584 x 0.986584, not incorporating fit results
[Thu Jun 27 02:35:18 2013] Vigneting correction estimate = 1.000000
[Thu Jun 27 02:35:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 27 02:35:18 2013] Assessing source extent using major
[Thu Jun 27 02:35:18 2013] Source does appear to be extended
[Thu Jun 27 02:35:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 27 02:42:00 2013] XMMSAS src. selection expression = ellipse(30996.677917, 26876.632660, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 27 02:42:00 2013] Writing source region out to fullrun_mos1_xmm0553510401_pi300-10000_pass1_cl_src4_src.reg
[Thu Jun 27 02:42:00 2013] Extracting stamp from image fullrun_mos1_xmm0553510401_pi300-10000_cl_sm2.00.img.gz, (319, 272) - (394, 347)
[Thu Jun 27 02:42:00 2013] XMMSAS bgd. selection expression = annulus(30996.677917, 26876.632660, 1087.500000, 2175.000000, X, Y)
[Thu Jun 27 02:42:00 2013] Writing fullrun_mos1_xmm0553510401_pi300-10000_pass1_cl_src4.gif
[Thu Jun 27 02:42:12 2013] Mean detx,y = (-2722.53, -6262.56) 
[Thu Jun 27 02:42:13 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 27 02:42:31 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 27 02:42:31 2013] Setting source spectrum file to fullrun_mos1_xmm0553510401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jun 27 02:42:31 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0553510401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jun 27 02:42:47 2013] Not generating rmf since there are only 67 counts
[Thu Jun 27 02:42:47 2013] rmf not generated due to insufficient counts
[Thu Jun 27 02:46:22 2013] Updating aperture counts using extracted products
[Thu Jun 27 02:46:22 2013] Total counts from fullrun_mos1_xmm0553510401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 219.00
[Thu Jun 27 02:46:22 2013] Total counts from fullrun_mos1_xmm0553510401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 1722.00
[Thu Jun 27 02:46:22 2013] Got source and background scale factors 1015568.000000, 10430585.000000
[Thu Jun 27 02:46:22 2013] User source parameters:
  Position = (356.8, 309.5) = 7 2 20.63 -8 20 49.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 51.3 +/- 15.8
  Background aperture counts = 167.7
  Rate = 0.003 +/- 0.0008

[Thu Jun 27 02:46:22 2013] Updating counts from extracted products
[Thu Jun 27 02:46:22 2013] Set source signif. to 51.34/12.95 = 3.96
[Thu Jun 27 02:46:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 27 02:46:22 2013] Using photon index=1.80, rate=0.00252, arf fullrun_mos1_xmm0553510401_pi300-10000_pass1_cl_src4.arf
[Thu Jun 27 02:46:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 27 02:46:22 2013] Updating source flux to 6.4e-14
[Thu Jun 27 02:46:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 27 02:46:25 2013] xmm0553510401/analysis//spectral/fullrun_mos1_xmm0553510401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete