[Fri Jun 15 10:17:09 2012] Detection parameters:
  Position = (298.6, 182.1) = 23 57 14.83 56 35 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.9 +/- 13.8
  Background counts = 24.0
  Rate = 0.007 +/- 0.0009

[Fri Jun 15 10:17:09 2012] Off-axis axis estimate = 8.43'
[Fri Jun 15 10:50:06 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:50:06 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Fri Jun 15 10:50:06 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Fri Jun 15 10:50:06 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.64"
[Fri Jun 15 11:02:23 2012] fullrun_mos2_xmm0553510301_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 11:02:23 2012] fullrun_mos2_xmm0553510301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 11:02:23 2012] Fit fullrun_mos2_xmm0553510301_pi300-10000_cl_pass0_src3 appears to have run properly
[Fri Jun 15 11:02:23 2012] fullrun_mos2_xmm0553510301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 11:02:23 2012] fullrun_mos2_xmm0553510301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 11:02:23 2012] Fit fullrun_mos2_xmm0553510301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 15 11:02:33 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 12.785975 pixels away
[Fri Jun 15 11:02:33 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 11:02:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 11:02:33 2012] Assessing source extent using major
[Fri Jun 15 11:02:33 2012] Source does appear to be extended
[Fri Jun 15 11:02:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 11:31:21 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:31:21 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Fri Jun 15 11:31:21 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Fri Jun 15 11:31:21 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.64"
[Fri Jun 15 11:43:28 2012] fullrun_mos2_xmm0553510301_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 11:43:28 2012] fullrun_mos2_xmm0553510301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 11:43:28 2012] Fit fullrun_mos2_xmm0553510301_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Jun 15 11:43:28 2012] fullrun_mos2_xmm0553510301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 11:43:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553510301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 15 11:43:28 2012] fullrun_mos2_xmm0553510301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 11:43:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553510301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 15 11:43:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553510301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553510301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 11:43:34 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 16.989393 pixels away
[Fri Jun 15 11:43:34 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 11:43:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 11:43:34 2012] Assessing source extent using major
[Fri Jun 15 11:43:34 2012] Source does appear to be extended
[Fri Jun 15 11:43:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 12:04:16 2012] XMMSAS src. selection expression = ellipse(25931.792694, 15796.623245, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 15 12:04:16 2012] Writing source region out to fullrun_mos2_xmm0553510301_pi300-10000_pass1_cl_src8_src.reg
[Fri Jun 15 12:04:16 2012] Extracting stamp from image fullrun_mos2_xmm0553510301_pi300-10000_cl_sm2.00.img.gz, (261, 145) - (336, 220)
[Fri Jun 15 12:04:16 2012] XMMSAS bgd. selection expression = annulus(25931.792694, 15796.623245, 1087.500000, 2175.000000, X, Y)
[Fri Jun 15 12:04:16 2012] Writing fullrun_mos2_xmm0553510301_pi300-10000_pass1_cl_src8.gif
[Fri Jun 15 12:05:06 2012] Mean detx,y = (3843.27, 8165.49) 
[Fri Jun 15 12:05:07 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 12:05:24 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 12:05:24 2012] Setting source spectrum file to fullrun_mos2_xmm0553510301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun 15 12:05:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553510301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri Jun 15 12:07:48 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 15 12:07:48 2012] rmf not generated due to insufficient counts
[Fri Jun 15 12:09:19 2012] Updating aperture counts using extracted products
[Fri Jun 15 12:09:19 2012] Error reading totcts from fullrun_mos2_xmm0553510301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Jun 15 12:09:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 12:09:19 2012] Using photon index=1.80, rate=0.00699, arf fullrun_mos2_xmm0553510301_pi300-10000_pass1_cl_src8.arf
[Fri Jun 15 12:09:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 12:09:19 2012] Updating source flux to 1.3e-13
[Fri Jun 15 12:09:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 15 12:09:40 2012] xmm0553510301/analysis//spectral/fullrun_mos2_xmm0553510301_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete