[Fri Jun 15 10:16:51 2012] Detection parameters:
  Position = (221.5, 121.9) = 23 57 55.35 56 30 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.0 +/- 12.7
  Background counts = 22.3
  Rate = 0.002 +/- 0.0005

[Fri Jun 15 10:16:51 2012] Off-axis axis estimate = 13.96'
[Fri Jun 15 10:37:07 2012] Using EEF radius (= 13.41 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:37:07 2012] Initial guess for spatial extent in simple fitting = 13.41"
[Fri Jun 15 10:37:07 2012] source mask rpix=3.1, npix_max = 51, mask sum = 47, frac = 0.915
[Fri Jun 15 10:37:07 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 13.41"
[Fri Jun 15 10:50:06 2012] fullrun_mos1_xmm0553510301_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jun 15 10:50:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510301_pi300-10000_cl_pass0_src7.csv
[Fri Jun 15 10:50:06 2012] fullrun_mos1_xmm0553510301_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jun 15 10:50:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510301_pi300-10000_cl_pass0_src7.csv
[Fri Jun 15 10:50:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553510301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553510301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 10:50:06 2012] fullrun_mos1_xmm0553510301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jun 15 10:50:06 2012] fullrun_mos1_xmm0553510301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jun 15 10:50:06 2012] Fit fullrun_mos1_xmm0553510301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jun 15 11:02:31 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 17.025080 pixels away
[Fri Jun 15 11:02:31 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 11:02:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 11:02:31 2012] Assessing source extent using major
[Fri Jun 15 11:02:31 2012] Source does appear to be extended
[Fri Jun 15 11:02:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 11:18:46 2012] Using EEF radius (= 13.41 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:18:46 2012] Initial guess for spatial extent in simple fitting = 13.41"
[Fri Jun 15 11:18:46 2012] source mask rpix=3.1, npix_max = 51, mask sum = 47, frac = 0.915
[Fri Jun 15 11:18:46 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 13.41"
[Fri Jun 15 11:31:21 2012] fullrun_mos1_xmm0553510301_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun 15 11:31:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510301_pi300-10000_cl_pass1_src7.csv
[Fri Jun 15 11:31:21 2012] fullrun_mos1_xmm0553510301_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun 15 11:31:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510301_pi300-10000_cl_pass1_src7.csv
[Fri Jun 15 11:31:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553510301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553510301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 11:31:21 2012] fullrun_mos1_xmm0553510301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun 15 11:31:21 2012] fullrun_mos1_xmm0553510301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun 15 11:31:21 2012] Fit fullrun_mos1_xmm0553510301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jun 15 11:43:33 2012] Spatial fit model total counts = 383.979000, observed total counts = 379.000000
[Fri Jun 15 11:43:33 2012] Offset between fit and detection position for source 10 = 4.001815 pixels
[Fri Jun 15 11:43:33 2012] 377.108000 total counts/ 164.994000 bgd. counts: snr = 16.513353
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.001815 pixels
  Position = (225.3, 120.5) = 23 57 53.38 56 30 43.9
  Extent = 26.8 (26.8-53.6)", rotation angle = 0
  Source counts = 212.1 +/- 19.4
  Background counts = 165.0
  Rate = 0.008 +/- 0.0007
[Fri Jun 15 11:43:33 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 11:43:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 11:43:33 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 11:43:33 2012] Source does appear to be extended
[Fri Jun 15 11:43:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 11:56:31 2012] XMMSAS src. selection expression = ellipse(19551.702000, 10434.608400, 1609.170046, 1609.170046, 0.000000, X, Y)
[Fri Jun 15 11:56:31 2012] Writing source region out to fullrun_mos1_xmm0553510301_pi300-10000_pass1_cl_src10_src.reg
[Fri Jun 15 11:56:31 2012] Extracting stamp from image fullrun_mos1_xmm0553510301_pi300-10000_cl_sm2.00.img.gz, (133, 28) - (318, 213)
[Fri Jun 15 11:56:31 2012] XMMSAS bgd. selection expression = annulus(19551.702000, 10434.608400, 2681.950077, 5363.900154, X, Y) && !ellipse(14714.166473, 12092.944992, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 15 11:56:31 2012] Writing fullrun_mos1_xmm0553510301_pi300-10000_pass1_cl_src10.gif
[Fri Jun 15 11:58:30 2012] Mean detx,y = (15207.10, 894.41) 
[Fri Jun 15 11:58:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 11:59:08 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 11:59:08 2012] Setting source spectrum file to fullrun_mos1_xmm0553510301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun 15 11:59:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553510301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun 15 12:09:19 2012] Updating aperture counts using extracted products
[Fri Jun 15 12:09:19 2012] Error reading totcts from fullrun_mos1_xmm0553510301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun 15 12:09:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 12:09:19 2012] Using photon index=1.80, rate=0.00795, arf fullrun_mos1_xmm0553510301_pi300-10000_pass1_cl_src10.arf
[Fri Jun 15 12:09:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 12:09:19 2012] Updating source flux to 1.7e-13
[Fri Jun 15 12:09:39 2012] xmm0553510301/analysis//spectral/fullrun_mos1_xmm0553510301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete