[Sat Mar  3 12:40:10 2012] Detection parameters:
  Position = (241.5, 418.9) = 19 41 31.07 40 20 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.4 +/- 8.7
  Background counts = 12.2
  Rate = 0.002 +/- 0.0006

[Sat Mar  3 12:40:10 2012] Off-axis axis estimate = 9.66'
[Sat Mar  3 13:33:06 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 13:33:06 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Sat Mar  3 13:33:06 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.101
[Sat Mar  3 13:33:06 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.26"
[Sat Mar  3 13:58:06 2012] fullrun_mos2_xmm0553510201_pi300-10000_cl_pass0_src18.ximg exists
[Sat Mar  3 13:58:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553510201_pi300-10000_cl_pass0_src18.csv
[Sat Mar  3 13:58:06 2012] fullrun_mos2_xmm0553510201_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Mar  3 13:58:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553510201_pi300-10000_cl_pass0_src18.csv
[Sat Mar  3 13:58:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553510201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553510201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 13:58:06 2012] fullrun_mos2_xmm0553510201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Mar  3 13:58:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553510201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat Mar  3 13:58:06 2012] fullrun_mos2_xmm0553510201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Mar  3 13:58:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553510201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat Mar  3 13:58:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553510201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553510201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 13:58:16 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.640362 pixels away
[Sat Mar  3 13:58:16 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 13:58:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 13:58:16 2012] Assessing source extent using major
[Sat Mar  3 13:58:16 2012] Source does appear to be extended
[Sat Mar  3 13:58:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 14:54:26 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 14:54:26 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Sat Mar  3 14:54:26 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.101
[Sat Mar  3 14:54:26 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 11.26"
[Sat Mar  3 15:19:25 2012] fullrun_mos2_xmm0553510201_pi300-10000_cl_pass1_src17.ximg exists
[Sat Mar  3 15:19:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553510201_pi300-10000_cl_pass1_src17.csv
[Sat Mar  3 15:19:25 2012] fullrun_mos2_xmm0553510201_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Mar  3 15:19:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553510201_pi300-10000_cl_pass1_src17.csv
[Sat Mar  3 15:19:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553510201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553510201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 15:19:25 2012] fullrun_mos2_xmm0553510201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Mar  3 15:19:25 2012] fullrun_mos2_xmm0553510201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Mar  3 15:19:25 2012] Fit fullrun_mos2_xmm0553510201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Mar  3 15:19:35 2012] Spatial fit model total counts = 127.943000, observed total counts = 124.000000
[Sat Mar  3 15:19:35 2012] Offset between fit and detection position for source 5 = 0.210836 pixels
[Sat Mar  3 15:19:35 2012] 129.745900 total counts/ 100.192000 bgd. counts: snr = 2.952557
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.210836 pixels
  Position = (241.3, 418.9) = 19 41 31.15 40 20 34.1
  Extent = 5.4 (3.7-7.8)", rotation angle = 0
  Source counts = 29.6 +/- 11.4
  Background counts = 100.2
  Rate = 0.001 +/- 0.0004
[Sat Mar  3 15:19:35 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 15:19:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 15:19:35 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 15:19:35 2012] Source does appear to be extended
[Sat Mar  3 15:19:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 16:01:05 2012] XMMSAS src. selection expression = ellipse(20942.911600, 36393.343200, 325.903809, 325.903809, 0.000000, X, Y)
[Sat Mar  3 16:01:05 2012] Writing source region out to fullrun_mos2_xmm0553510201_pi300-10000_pass1_cl_src5_src.reg
[Sat Mar  3 16:01:05 2012] Extracting stamp from image fullrun_mos2_xmm0553510201_pi300-10000_cl_sm2.00.img.gz, (223, 400) - (260, 438)
[Sat Mar  3 16:01:05 2012] XMMSAS bgd. selection expression = annulus(20942.911600, 36393.343200, 543.173016, 1086.346031, X, Y)
[Sat Mar  3 16:01:05 2012] Writing fullrun_mos2_xmm0553510201_pi300-10000_pass1_cl_src5.gif
[Sat Mar  3 16:03:39 2012] Mean detx,y = (-8941.70, -7253.15) 
[Sat Mar  3 16:03:40 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar  3 16:03:48 2012] Binned source spectrum to 10 counts/bin
[Sat Mar  3 16:03:48 2012] Setting source spectrum file to fullrun_mos2_xmm0553510201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar  3 16:03:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553510201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Mar  3 16:19:20 2012] Not generating rmf since there are only 29 counts
[Sat Mar  3 16:19:20 2012] rmf not generated due to insufficient counts
[Sat Mar  3 16:20:20 2012] Updating aperture counts using extracted products
[Sat Mar  3 16:20:20 2012] Error reading totcts from fullrun_mos2_xmm0553510201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar  3 16:20:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar  3 16:20:20 2012] Using photon index=1.80, rate=0.00111, arf fullrun_mos2_xmm0553510201_pi300-10000_pass1_cl_src5.arf
[Sat Mar  3 16:20:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar  3 16:20:20 2012] Updating source flux to 2.7e-14
[Sat Mar  3 16:20:38 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting