[Sat Mar  3 12:39:55 2012] Detection parameters:
  Position = (319.2, 192.6) = 19 41 1.54 40 4 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.1 +/- 9.0
  Background counts = 13.1
  Rate = 0.003 +/- 0.0006

[Sat Mar  3 12:39:55 2012] Off-axis axis estimate = 7.82'
[Sat Mar  3 13:10:36 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 13:10:36 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Sat Mar  3 13:10:36 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.088
[Sat Mar  3 13:10:36 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.34"
[Sat Mar  3 13:33:06 2012] fullrun_mos1_xmm0553510201_pi300-10000_cl_pass0_src15.ximg exists
[Sat Mar  3 13:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510201_pi300-10000_cl_pass0_src15.csv
[Sat Mar  3 13:33:06 2012] fullrun_mos1_xmm0553510201_pi300-10000_cl_pass0_src15_1.ximg exists
[Sat Mar  3 13:33:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510201_pi300-10000_cl_pass0_src15.csv
[Sat Mar  3 13:33:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553510201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553510201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 13:33:06 2012] fullrun_mos1_xmm0553510201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sat Mar  3 13:33:06 2012] fullrun_mos1_xmm0553510201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Mar  3 13:33:06 2012] Fit fullrun_mos1_xmm0553510201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Mar  3 13:58:13 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 12.775143 pixels away
[Sat Mar  3 13:58:13 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 13:58:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 13:58:13 2012] Assessing source extent using major
[Sat Mar  3 13:58:13 2012] Source does appear to be extended
[Sat Mar  3 13:58:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 14:34:07 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 14:34:07 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Sat Mar  3 14:34:07 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.088
[Sat Mar  3 14:34:07 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 10.34"
[Sat Mar  3 14:54:26 2012] fullrun_mos1_xmm0553510201_pi300-10000_cl_pass1_src15.ximg exists
[Sat Mar  3 14:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510201_pi300-10000_cl_pass1_src15.csv
[Sat Mar  3 14:54:26 2012] fullrun_mos1_xmm0553510201_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Mar  3 14:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553510201_pi300-10000_cl_pass1_src15.csv
[Sat Mar  3 14:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553510201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553510201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 14:54:26 2012] fullrun_mos1_xmm0553510201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Mar  3 14:54:26 2012] fullrun_mos1_xmm0553510201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Mar  3 14:54:26 2012] Fit fullrun_mos1_xmm0553510201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Mar  3 15:19:32 2012] Spatial fit model total counts = 151.910000, observed total counts = 152.000000
[Sat Mar  3 15:19:32 2012] Offset between fit and detection position for source 17 = 0.180752 pixels
[Sat Mar  3 15:19:32 2012] 151.632300 total counts/ 127.682000 bgd. counts: snr = 2.119562
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.180752 pixels
  Position = (319.3, 192.8) = 19 41 1.51 40 4 10.8
  Extent = 3.8 (2.6-5.6)", rotation angle = 0
  Source counts = 24.0 +/- 12.3
  Background counts = 127.7
  Rate = 0.0009 +/- 0.0005
[Sat Mar  3 15:19:32 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 15:19:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 15:19:32 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 15:19:32 2012] Source does appear to be extended
[Sat Mar  3 15:19:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 15:52:56 2012] XMMSAS src. selection expression = ellipse(27727.453400, 16725.190200, 225.610806, 225.610806, 0.000000, X, Y)
[Sat Mar  3 15:52:56 2012] Writing source region out to fullrun_mos1_xmm0553510201_pi300-10000_pass1_cl_src17_src.reg
[Sat Mar  3 15:52:56 2012] Extracting stamp from image fullrun_mos1_xmm0553510201_pi300-10000_cl_sm2.00.img.gz, (306, 180) - (332, 206)
[Sat Mar  3 15:52:56 2012] XMMSAS bgd. selection expression = annulus(27727.453400, 16725.190200, 376.018011, 752.036022, X, Y)
[Sat Mar  3 15:52:56 2012] Writing fullrun_mos1_xmm0553510201_pi300-10000_pass1_cl_src17.gif
[Sat Mar  3 15:55:11 2012] Mean detx,y = (5050.71, -8157.74) 
[Sat Mar  3 15:55:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar  3 15:55:16 2012] Binned source spectrum to 10 counts/bin
[Sat Mar  3 15:55:16 2012] Setting source spectrum file to fullrun_mos1_xmm0553510201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Mar  3 15:55:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553510201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Mar  3 16:00:34 2012] Not generating rmf since there are only 23 counts
[Sat Mar  3 16:00:34 2012] rmf not generated due to insufficient counts
[Sat Mar  3 16:20:19 2012] Updating aperture counts using extracted products
[Sat Mar  3 16:20:19 2012] Error reading totcts from fullrun_mos1_xmm0553510201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Mar  3 16:20:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar  3 16:20:19 2012] Using photon index=1.80, rate=0.000901, arf fullrun_mos1_xmm0553510201_pi300-10000_pass1_cl_src17.arf
[Sat Mar  3 16:20:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar  3 16:20:20 2012] Updating source flux to 2.3e-14
[Sat Mar  3 16:20:21 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting