[Wed May 22 17:19:02 2013] Detection parameters:
  Position = (321.7, 244.6) = 9 23 34.88 30 25 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.8 +/- 9.8
  Background counts = 5.7
  Rate = 0.02 +/- 0.003

[Wed May 22 17:19:02 2013] Off-axis axis estimate = 4.26'
[Wed May 22 17:20:19 2013] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Wed May 22 17:20:19 2013] Initial guess for spatial extent in simple fitting = 8.56"
[Wed May 22 17:20:19 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Wed May 22 17:20:19 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 8.56"
[Wed May 22 17:52:04 2013] fullrun_pn_xmm0553440601_pi300-10000_cl_pass0_src19.ximg exists
[Wed May 22 17:52:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553440601_pi300-10000_cl_pass0_src19.csv
[Wed May 22 17:52:04 2013] fullrun_pn_xmm0553440601_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed May 22 17:52:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553440601_pi300-10000_cl_pass0_src19.csv
[Wed May 22 17:52:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553440601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553440601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 17:52:04 2013] fullrun_pn_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed May 22 17:52:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed May 22 17:52:04 2013] fullrun_pn_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed May 22 17:52:04 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed May 22 17:52:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 18:53:41 2013] Spatial fit model total counts = -60.136700, observed total counts = 113.000000
[Wed May 22 18:53:41 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 18:53:41 2013] Vigneting correction estimate = 1.000000
[Wed May 22 18:53:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 18:53:41 2013] Assessing source extent using major
[Wed May 22 18:53:41 2013] Source does appear to be extended
[Wed May 22 18:53:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 18:53:55 2013] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Wed May 22 18:53:55 2013] Initial guess for spatial extent in simple fitting = 8.56"
[Wed May 22 18:53:55 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Wed May 22 18:53:55 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 8.56"
[Wed May 22 19:24:26 2013] fullrun_pn_xmm0553440601_pi300-10000_cl_pass1_src19.ximg exists
[Wed May 22 19:24:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553440601_pi300-10000_cl_pass1_src19.csv
[Wed May 22 19:24:26 2013] fullrun_pn_xmm0553440601_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed May 22 19:24:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553440601_pi300-10000_cl_pass1_src19.csv
[Wed May 22 19:24:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553440601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553440601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 19:24:26 2013] fullrun_pn_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed May 22 19:24:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src19.csv
[Wed May 22 19:24:26 2013] fullrun_pn_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed May 22 19:24:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src19.csv
[Wed May 22 19:24:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:14:10 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.967177 pixels away
[Wed May 22 20:14:10 2013] Vigneting correction estimate = 1.000000
[Wed May 22 20:14:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 20:14:10 2013] Assessing source extent using major
[Wed May 22 20:14:10 2013] Source does appear to be extended
[Wed May 22 20:14:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 20:14:24 2013] XMMSAS src. selection expression = ellipse(27943.473877, 21228.357849, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 20:14:24 2013] Writing source region out to fullrun_pn_xmm0553440601_pi300-10000_pass1_cl_src21_src.reg
[Wed May 22 20:14:24 2013] Extracting stamp from image fullrun_pn_xmm0553440601_pi300-10000_cl_sm2.00.img.gz, (284, 207) - (359, 282)
[Wed May 22 20:14:24 2013] XMMSAS bgd. selection expression = annulus(27943.473877, 21228.357849, 1087.500000, 2175.000000, X, Y) && !ellipse(30629.713043, 20495.233902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29051.425568, 22983.228668, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 20:14:24 2013] Writing fullrun_pn_xmm0553440601_pi300-10000_pass1_cl_src21.gif
[Wed May 22 20:23:44 2013] Mean detx,y = (-1768.91, -3583.93) 
[Wed May 22 20:23:46 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 20:24:09 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 20:24:09 2013] Setting source spectrum file to fullrun_pn_xmm0553440601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed May 22 20:24:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0553440601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed May 22 20:32:17 2013] Not generating rmf since there are only 68 counts
[Wed May 22 20:32:17 2013] rmf not generated due to insufficient counts
[Wed May 22 20:47:40 2013] Updating aperture counts using extracted products
[Wed May 22 20:47:40 2013] Total counts from fullrun_pn_xmm0553440601_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 96.00
[Wed May 22 20:47:40 2013] Total counts from fullrun_pn_xmm0553440601_pi300-10000_pass1_cl_src21_bgd.pi.gz = 218.00
[Wed May 22 20:47:40 2013] Got source and background scale factors 1017430.000000, 7989121.000000
[Wed May 22 20:47:40 2013] User source parameters:
  Position = (321.7, 244.6) = 9 23 34.88 30 25 49.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 68.2 +/- 10.8
  Background aperture counts = 27.8
  Rate = 0.01 +/- 0.002

[Wed May 22 20:47:40 2013] Updating counts from extracted products
[Wed May 22 20:47:40 2013] Set source signif. to 68.24/5.27 = 12.95
[Wed May 22 20:47:42 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 20:47:42 2013] Using photon index=1.80, rate=0.0136, arf fullrun_pn_xmm0553440601_pi300-10000_pass1_cl_src21.arf
[Wed May 22 20:47:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 20:47:42 2013] Updating source flux to 5.6e-14
[Wed May 22 20:47:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 20:47:52 2013] xmm0553440601/analysis//spectral/fullrun_pn_xmm0553440601_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete