[Wed May 22 17:19:41 2013] Detection parameters:
  Position = (274.5, 332.4) = 9 23 50.79 30 32 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.4 +/- 8.4
  Background counts = 2.5
  Rate = 0.008 +/- 0.001

[Wed May 22 17:19:42 2013] Off-axis axis estimate = 3.01'
[Wed May 22 18:17:33 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Wed May 22 18:17:33 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Wed May 22 18:17:33 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.157
[Wed May 22 18:17:33 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.94"
[Wed May 22 18:53:35 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_src7.ximg exists
[Wed May 22 18:53:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_src7.csv
[Wed May 22 18:53:35 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed May 22 18:53:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_src7.csv
[Wed May 22 18:53:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 18:53:35 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed May 22 18:53:35 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May 22 18:53:35 2013] Fit fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed May 22 18:53:47 2013] Spatial fit model total counts = 57.822100, observed total counts = 65.000000
[Wed May 22 18:53:47 2013] Offset between fit and detection position for source 9 = 0.814410 pixels
[Wed May 22 18:53:47 2013] 55.671530 total counts/ 9.095930 bgd. counts: snr = 15.443115
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.814410 pixels
  Position = (273.8, 332.9) = 9 23 51.00 30 32 13.1
  Extent = 12.6 (8.3-15.9)" x 3.9 (2.9-5.4)", rotation angle = 34 (24-44) degrees
  Source counts = 46.6 +/- 7.5
  Background counts = 9.1
  Rate = 0.007 +/- 0.001
[Wed May 22 18:53:47 2013] Vigneting correction estimate = 1.000000
[Wed May 22 18:53:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 18:53:47 2013] Assessing source extent using major axis lower bound
[Wed May 22 18:53:47 2013] Source does appear to be extended
[Wed May 22 18:53:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.54
[Wed May 22 18:53:47 2013] Source is asymmetric
[Wed May 22 19:46:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 19:46:53 2013] Initial guess for spatial extent in simple fitting = 8.24"
[Wed May 22 19:46:53 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.828
[Wed May 22 19:46:53 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 8.24"
[Wed May 22 20:14:05 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src7.ximg exists
[Wed May 22 20:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src7.csv
[Wed May 22 20:14:05 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed May 22 20:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src7.csv
[Wed May 22 20:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:14:05 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed May 22 20:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed May 22 20:14:05 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed May 22 20:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed May 22 20:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:14:16 2013] Spatial fit model total counts = 58.626500, observed total counts = 65.000000
[Wed May 22 20:14:16 2013] Offset between fit and detection position for source 9 = 0.461586 pixels
[Wed May 22 20:14:16 2013] 54.841740 total counts/ 6.794640 bgd. counts: snr = 18.432488
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.461586 pixels
  Position = (274.1, 332.6) = 9 23 50.90 30 32 11.5
  Extent = 8.8 (6.7-8.8)", rotation angle = 0
  Source counts = 48.0 +/- 7.4
  Background counts = 6.8
  Rate = 0.007 +/- 0.001
[Wed May 22 20:14:16 2013] Vigneting correction estimate = 1.000000
[Wed May 22 20:14:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 20:14:16 2013] Assessing source extent using major axis lower bound
[Wed May 22 20:14:16 2013] Source does appear to be extended
[Wed May 22 20:14:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 20:38:01 2013] XMMSAS src. selection expression = ellipse(23801.139820, 28883.787000, 526.965671, 526.965671, 0.000000, X, Y)
[Wed May 22 20:38:01 2013] Writing source region out to fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src9_src.reg
[Wed May 22 20:38:01 2013] Extracting stamp from image fullrun_mos2_xmm0553440601_pi300-10000_cl_sm2.00.img.gz, (244, 302) - (304, 363)
[Wed May 22 20:38:01 2013] XMMSAS bgd. selection expression = annulus(23801.139820, 28883.787000, 878.276118, 1756.552236, X, Y)
[Wed May 22 20:38:01 2013] Writing fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src9.gif
[Wed May 22 20:39:10 2013] Mean detx,y = (-114.09, -5003.85) 
[Wed May 22 20:39:11 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 20:39:22 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 20:39:22 2013] Setting source spectrum file to fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed May 22 20:39:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed May 22 20:46:12 2013] Not generating rmf since there are only 48 counts
[Wed May 22 20:46:12 2013] rmf not generated due to insufficient counts
[Wed May 22 20:47:45 2013] Updating aperture counts using extracted products
[Wed May 22 20:47:45 2013] Total counts from fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 53.00
[Wed May 22 20:47:45 2013] Total counts from fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src9_bgd.pi.gz = 86.00
[Wed May 22 20:47:45 2013] Got source and background scale factors 778736.000000, 6793881.000000
[Wed May 22 20:47:45 2013] User source parameters:
  Position = (274.1, 332.6) = 9 23 50.90 30 32 11.5
  Extent = 8.8 (6.7-8.8)", rotation angle = 0
  Source aperture counts = 43.1 +/- 8.3
  Background aperture counts = 9.9
  Rate = 0.007 +/- 0.001

[Wed May 22 20:47:47 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 20:47:47 2013] Using photon index=1.80, rate=0.00726, arf fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src9.arf
[Wed May 22 20:47:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 20:47:47 2013] Updating source flux to 7.8e-14
[Wed May 22 20:47:50 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 22 20:47:51 2013] xmm0553440601/analysis//spectral/fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete