[Wed May 22 17:19:41 2013] Detection parameters:
  Position = (469.5, 344.0) = 9 22 45.12 30 33 0.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.1 +/- 12.4
  Background counts = 2.2
  Rate = 0.02 +/- 0.002

[Wed May 22 17:19:42 2013] Off-axis axis estimate = 12.83'
[Wed May 22 18:17:33 2013] Using EEF radius (= 12.84 ")to estimate initial spatial extent for simple fitting
[Wed May 22 18:17:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 18:17:33 2013] Initial guess for spatial extent in simple fitting = 12.84"
[Wed May 22 18:17:33 2013] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.028
[Wed May 22 18:17:33 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.84"
[Wed May 22 18:53:35 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_src3.ximg exists
[Wed May 22 18:53:35 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May 22 18:53:35 2013] Fit fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed May 22 18:53:35 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May 22 18:53:35 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May 22 18:53:35 2013] Fit fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May 22 18:53:47 2013] Spatial fit model total counts = 130.850000, observed total counts = 125.000000
[Wed May 22 18:53:47 2013] Offset between fit and detection position for source 2 = 0.290338 pixels
[Wed May 22 18:53:47 2013] 128.118800 total counts/ 51.303900 bgd. counts: snr = 10.724333
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.290338 pixels
  Position = (469.2, 343.9) = 9 22 45.22 30 33 0.0
  Extent = 9.5 (7.6-11.8)" x 4.2 (3.2-5.7)", rotation angle = 68 (57-80) degrees
  Source counts = 76.8 +/- 11.3
  Background counts = 51.3
  Rate = 0.01 +/- 0.002
[Wed May 22 18:53:47 2013] Vigneting correction estimate = 1.000000
[Wed May 22 18:53:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 18:53:47 2013] Assessing source extent using major axis lower bound
[Wed May 22 18:53:47 2013] Source does appear to be extended
[Wed May 22 18:53:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.33
[Wed May 22 19:46:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 19:46:53 2013] Initial guess for spatial extent in simple fitting = 6.88"
[Wed May 22 19:46:53 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.923
[Wed May 22 19:46:53 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 6.88"
[Wed May 22 20:14:05 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src3.ximg exists
[Wed May 22 20:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src3.csv
[Wed May 22 20:14:05 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May 22 20:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src3.csv
[Wed May 22 20:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:14:05 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May 22 20:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 22 20:14:05 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May 22 20:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May 22 20:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:14:16 2013] Warning, spatial fit 3 centroid is now closest to src. 12
[Wed May 22 20:14:16 2013] Vigneting correction estimate = 1.000000
[Wed May 22 20:14:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 20:14:16 2013] Assessing source extent using major axis lower bound
[Wed May 22 20:14:16 2013] Source does appear to be extended
[Wed May 22 20:14:16 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.33
[Wed May 22 20:38:01 2013] XMMSAS src. selection expression = ellipse(40770.690860, 29869.725800, 572.277016, 253.641607, 67.814747, X, Y)
[Wed May 22 20:38:01 2013] Writing source region out to fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src2_src.reg
[Wed May 22 20:38:01 2013] Extracting stamp from image fullrun_mos2_xmm0553440601_pi300-10000_cl_sm2.00.img.gz, (436, 311) - (502, 377)
[Wed May 22 20:38:01 2013] XMMSAS bgd. selection expression = annulus(40770.690860, 29869.725800, 953.795027, 1907.590055, X, Y)
[Wed May 22 20:38:01 2013] Writing fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src2.gif
[Wed May 22 20:38:23 2013] Mean detx,y = (16551.72, -1847.94) 
[Wed May 22 20:38:24 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 20:38:36 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 20:38:36 2013] Setting source spectrum file to fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 22 20:38:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 22 20:45:53 2013] Not generating rmf since there are only 76 counts
[Wed May 22 20:45:53 2013] rmf not generated due to insufficient counts
[Wed May 22 20:47:44 2013] Updating aperture counts using extracted products
[Wed May 22 20:47:44 2013] Total counts from fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 80.00
[Wed May 22 20:47:44 2013] Total counts from fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src2_bgd.pi.gz = 63.00
[Wed May 22 20:47:44 2013] Got source and background scale factors 425880.000000, 4920296.000000
[Wed May 22 20:47:44 2013] User source parameters:
  Position = (469.2, 343.9) = 9 22 45.22 30 33 0.0
  Extent = 9.5 (7.6-11.8)" x 4.2 (3.2-5.7)", rotation angle = 68 (57-80) degrees
  Source aperture counts = 74.5 +/- 10.0
  Background aperture counts = 5.5
  Rate = 0.01 +/- 0.002

[Wed May 22 20:47:47 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 20:47:47 2013] Using photon index=1.80, rate=0.0116, arf fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src2.arf
[Wed May 22 20:47:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 20:47:47 2013] Updating source flux to 5.1e-13
[Wed May 22 20:47:50 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 22 20:47:51 2013] xmm0553440601/analysis//spectral/fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete