[Wed May 22 17:19:42 2013] Detection parameters:
  Position = (341.0, 199.2) = 9 23 28.40 30 22 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19.9 +/- 5.9
  Background counts = 2.3
  Rate = 0.005 +/- 0.002

[Wed May 22 17:19:42 2013] Off-axis axis estimate = 7.83'
[Wed May 22 18:17:33 2013] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Wed May 22 18:17:33 2013] Initial guess for spatial extent in simple fitting = 10.34"
[Wed May 22 18:17:33 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.087
[Wed May 22 18:17:33 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.34"
[Wed May 22 18:53:35 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_src15.ximg exists
[Wed May 22 18:53:35 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed May 22 18:53:35 2013] Fit fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_src15 appears to have run properly
[Wed May 22 18:53:35 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed May 22 18:53:35 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May 22 18:53:35 2013] Fit fullrun_mos2_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed May 22 18:53:47 2013] Spatial fit model total counts = 38.155300, observed total counts = 37.000000
[Wed May 22 18:53:47 2013] Offset between fit and detection position for source 19 = 0.144744 pixels
[Wed May 22 18:53:47 2013] 37.965800 total counts/ 25.384600 bgd. counts: snr = 2.497106
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.144744 pixels
  Position = (341.1, 199.4) = 9 23 28.39 30 22 32.1
  Extent = 4.7 (2.6-7.5)", rotation angle = 0
  Source counts = 12.6 +/- 6.2
  Background counts = 25.4
  Rate = 0.002 +/- 0.0009
[Wed May 22 18:53:47 2013] Vigneting correction estimate = 1.000000
[Wed May 22 18:53:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 18:53:47 2013] Assessing source extent using major axis lower bound
[Wed May 22 18:53:47 2013] Source does appear to be extended
[Wed May 22 18:53:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 19:46:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 19:46:53 2013] Initial guess for spatial extent in simple fitting = 4.70"
[Wed May 22 19:46:53 2013] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.201
[Wed May 22 19:46:53 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 4.70"
[Wed May 22 20:14:05 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src14.ximg exists
[Wed May 22 20:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src14.csv
[Wed May 22 20:14:05 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed May 22 20:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src14.csv
[Wed May 22 20:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:14:05 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed May 22 20:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed May 22 20:14:05 2013] fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed May 22 20:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed May 22 20:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:14:16 2013] Warning, spatial fit 14 centroid is now closest to src. 12
[Wed May 22 20:14:16 2013] Vigneting correction estimate = 1.000000
[Wed May 22 20:14:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 20:14:16 2013] Assessing source extent using major axis lower bound
[Wed May 22 20:14:16 2013] Source does appear to be extended
[Wed May 22 20:14:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 20:38:01 2013] XMMSAS src. selection expression = ellipse(29623.396060, 17296.288800, 281.946608, 281.946608, 0.000000, X, Y)
[Wed May 22 20:38:01 2013] Writing source region out to fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src19_src.reg
[Wed May 22 20:38:01 2013] Extracting stamp from image fullrun_mos2_xmm0553440601_pi300-10000_cl_sm2.00.img.gz, (325, 183) - (357, 216)
[Wed May 22 20:38:01 2013] XMMSAS bgd. selection expression = annulus(29623.396060, 17296.288800, 469.911014, 939.822027, X, Y)
[Wed May 22 20:38:01 2013] Writing fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src19.gif
[Wed May 22 20:40:47 2013] Mean detx,y = (2711.33, 7633.73) 
[Wed May 22 20:40:48 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 20:40:55 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 20:40:56 2013] Setting source spectrum file to fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed May 22 20:40:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed May 22 20:46:55 2013] Not generating rmf since there are only 12 counts
[Wed May 22 20:46:55 2013] rmf not generated due to insufficient counts
[Wed May 22 20:47:46 2013] Updating aperture counts using extracted products
[Wed May 22 20:47:46 2013] Total counts from fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 15.00
[Wed May 22 20:47:46 2013] Total counts from fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src19_bgd.pi.gz = 27.00
[Wed May 22 20:47:46 2013] Got source and background scale factors 222644.000000, 1855236.000000
[Wed May 22 20:47:46 2013] User source parameters:
  Position = (341.1, 199.4) = 9 23 28.39 30 22 32.1
  Extent = 4.7 (2.6-7.5)", rotation angle = 0
  Source aperture counts = 11.8 +/- 5.0
  Background aperture counts = 3.2
  Rate = 0.002 +/- 0.0008

[Wed May 22 20:47:47 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 20:47:47 2013] Using photon index=1.80, rate=0.0019, arf fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src19.arf
[Wed May 22 20:47:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 20:47:47 2013] Updating source flux to 4.8e-14
[Wed May 22 20:47:50 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 22 20:47:51 2013] xmm0553440601/analysis//spectral/fullrun_mos2_xmm0553440601_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete