[Wed May 22 17:19:20 2013] Detection parameters:
  Position = (321.9, 244.8) = 9 23 34.83 30 25 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.8 +/- 6.9
  Background counts = 2.6
  Rate = 0.006 +/- 0.001

[Wed May 22 17:19:20 2013] Off-axis axis estimate = 4.24'
[Wed May 22 17:52:04 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Wed May 22 17:52:04 2013] Initial guess for spatial extent in simple fitting = 8.55"
[Wed May 22 17:52:04 2013] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.781
[Wed May 22 17:52:04 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 8.55"
[Wed May 22 18:17:33 2013] fullrun_mos1_xmm0553440601_pi300-10000_cl_pass0_src11.ximg exists
[Wed May 22 18:17:33 2013] fullrun_mos1_xmm0553440601_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed May 22 18:17:33 2013] Fit fullrun_mos1_xmm0553440601_pi300-10000_cl_pass0_src11 appears to have run properly
[Wed May 22 18:17:33 2013] fullrun_mos1_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed May 22 18:17:33 2013] fullrun_mos1_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed May 22 18:17:33 2013] Fit fullrun_mos1_xmm0553440601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed May 22 18:53:44 2013] Spatial fit model total counts = 48.647100, observed total counts = 47.000000
[Wed May 22 18:53:44 2013] Offset between fit and detection position for source 14 = 0.175404 pixels
[Wed May 22 18:53:44 2013] 52.231500 total counts/ 34.380500 bgd. counts: snr = 3.044433
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.175404 pixels
  Position = (321.7, 244.7) = 9 23 34.88 30 25 49.5
  Extent = 4.2 (2.8-6.0)", rotation angle = 0
  Source counts = 17.9 +/- 7.2
  Background counts = 34.4
  Rate = 0.003 +/- 0.001
[Wed May 22 18:53:44 2013] Vigneting correction estimate = 1.000000
[Wed May 22 18:53:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 18:53:44 2013] Assessing source extent using major axis lower bound
[Wed May 22 18:53:44 2013] Source does appear to be extended
[Wed May 22 18:53:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 19:24:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 19:24:26 2013] Initial guess for spatial extent in simple fitting = 4.15"
[Wed May 22 19:24:26 2013] source mask rpix=1.0, npix_max = 8, mask sum = 8, frac = 0.945
[Wed May 22 19:24:26 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 4.15"
[Wed May 22 19:46:53 2013] fullrun_mos1_xmm0553440601_pi300-10000_cl_pass1_src11.ximg exists
[Wed May 22 19:46:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553440601_pi300-10000_cl_pass1_src11.csv
[Wed May 22 19:46:53 2013] fullrun_mos1_xmm0553440601_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed May 22 19:46:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553440601_pi300-10000_cl_pass1_src11.csv
[Wed May 22 19:46:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553440601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553440601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 19:46:53 2013] fullrun_mos1_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed May 22 19:46:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed May 22 19:46:53 2013] fullrun_mos1_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed May 22 19:46:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed May 22 19:46:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553440601_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:14:13 2013] Warning, spatial fit 11 centroid is now closest to src. 3
[Wed May 22 20:14:13 2013] Vigneting correction estimate = 1.000000
[Wed May 22 20:14:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 20:14:13 2013] Assessing source extent using major axis lower bound
[Wed May 22 20:14:13 2013] Source does appear to be extended
[Wed May 22 20:14:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 20:33:21 2013] XMMSAS src. selection expression = ellipse(27942.554800, 21243.366800, 249.270007, 249.270007, 0.000000, X, Y)
[Wed May 22 20:33:21 2013] Writing source region out to fullrun_mos1_xmm0553440601_pi300-10000_pass1_cl_src14_src.reg
[Wed May 22 20:33:21 2013] Extracting stamp from image fullrun_mos1_xmm0553440601_pi300-10000_cl_sm2.00.img.gz, (307, 230) - (336, 259)
[Wed May 22 20:33:21 2013] XMMSAS bgd. selection expression = annulus(27942.554800, 21243.366800, 415.450012, 830.900024, X, Y)
[Wed May 22 20:33:21 2013] Writing fullrun_mos1_xmm0553440601_pi300-10000_pass1_cl_src14.gif
[Wed May 22 20:35:13 2013] Mean detx,y = (3632.23, -2173.45) 
[Wed May 22 20:35:14 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 20:35:20 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 20:35:21 2013] Setting source spectrum file to fullrun_mos1_xmm0553440601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed May 22 20:35:21 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0553440601_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed May 22 20:37:34 2013] Not generating rmf since there are only 17 counts
[Wed May 22 20:37:34 2013] rmf not generated due to insufficient counts
[Wed May 22 20:47:43 2013] Updating aperture counts using extracted products
[Wed May 22 20:47:43 2013] Total counts from fullrun_mos1_xmm0553440601_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 22.00
[Wed May 22 20:47:43 2013] Total counts from fullrun_mos1_xmm0553440601_pi300-10000_pass1_cl_src14_bgd.pi.gz = 27.00
[Wed May 22 20:47:43 2013] Got source and background scale factors 183288.000000, 1467036.000000
[Wed May 22 20:47:43 2013] User source parameters:
  Position = (321.7, 244.7) = 9 23 34.88 30 25 49.5
  Extent = 4.2 (2.8-6.0)", rotation angle = 0
  Source aperture counts = 18.6 +/- 5.8
  Background aperture counts = 3.4
  Rate = 0.003 +/- 0.0009

[Wed May 22 20:47:44 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 20:47:44 2013] Using photon index=1.80, rate=0.0027, arf fullrun_mos1_xmm0553440601_pi300-10000_pass1_cl_src14.arf
[Wed May 22 20:47:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 20:47:44 2013] Updating source flux to 4e-14
[Wed May 22 20:47:49 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 22 20:47:50 2013] xmm0553440601/analysis//spectral/fullrun_mos1_xmm0553440601_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete