[Wed Jun 19 12:09:15 2013] Detection parameters:
  Position = (345.6, 235.9) = 22 36 20.82 22 26 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.9 +/- 11.5
  Background counts = 5.9
  Rate = 0.03 +/- 0.003

[Wed Jun 19 12:09:15 2013] Off-axis axis estimate = 5.68'
[Wed Jun 19 12:10:16 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 12:10:16 2013] Initial guess for spatial extent in simple fitting = 9.27"
[Wed Jun 19 12:10:16 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.084
[Wed Jun 19 12:10:16 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.27"
[Wed Jun 19 12:23:56 2013] fullrun_pn_xmm0553440201_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun 19 12:23:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553440201_pi300-10000_cl_pass0_src11.csv
[Wed Jun 19 12:23:56 2013] fullrun_pn_xmm0553440201_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun 19 12:23:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553440201_pi300-10000_cl_pass0_src11.csv
[Wed Jun 19 12:23:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553440201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553440201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 12:23:56 2013] fullrun_pn_xmm0553440201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 19 12:23:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553440201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun 19 12:23:57 2013] fullrun_pn_xmm0553440201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 19 12:23:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553440201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jun 19 12:23:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553440201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553440201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 12:40:19 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 10.859688 pixels away
[Wed Jun 19 12:40:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 12:40:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 12:40:19 2013] Assessing source extent using major
[Wed Jun 19 12:40:19 2013] Source does appear to be extended
[Wed Jun 19 12:40:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 12:40:26 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 12:40:26 2013] Initial guess for spatial extent in simple fitting = 9.27"
[Wed Jun 19 12:40:26 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.084
[Wed Jun 19 12:40:26 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 9.27"
[Wed Jun 19 12:54:14 2013] fullrun_pn_xmm0553440201_pi300-10000_cl_pass1_src11.ximg exists
[Wed Jun 19 12:54:14 2013] fullrun_pn_xmm0553440201_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Jun 19 12:54:14 2013] Fit fullrun_pn_xmm0553440201_pi300-10000_cl_pass1_src11 appears to have run properly
[Wed Jun 19 12:54:14 2013] fullrun_pn_xmm0553440201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Jun 19 12:54:14 2013] fullrun_pn_xmm0553440201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Jun 19 12:54:14 2013] Fit fullrun_pn_xmm0553440201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Jun 19 13:05:46 2013] Spatial fit model total counts = 130.974000, observed total counts = 120.000000
[Wed Jun 19 13:05:46 2013] Offset between fit and detection position for source 11 = 0.172062 pixels
[Wed Jun 19 13:05:46 2013] 130.474700 total counts/ 67.798800 bgd. counts: snr = 7.611839
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.172062 pixels
  Position = (345.7, 235.8) = 22 36 20.79 22 26 45.1
  Extent = 5.6 (4.2-7.1)", rotation angle = 0
  Source counts = 62.7 +/- 11.4
  Background counts = 67.8
  Rate = 0.01 +/- 0.002
[Wed Jun 19 13:05:46 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 13:05:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 13:05:46 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 13:05:46 2013] Source does appear to be extended
[Wed Jun 19 13:05:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 13:05:52 2013] XMMSAS src. selection expression = ellipse(30028.071200, 20463.511200, 333.169210, 333.169210, 0.000000, X, Y)
[Wed Jun 19 13:05:52 2013] Writing source region out to fullrun_pn_xmm0553440201_pi300-10000_pass1_cl_src11_src.reg
[Wed Jun 19 13:05:52 2013] Extracting stamp from image fullrun_pn_xmm0553440201_pi300-10000_cl_sm2.00.img.gz, (327, 217) - (365, 255)
[Wed Jun 19 13:05:52 2013] XMMSAS bgd. selection expression = annulus(30028.071200, 20463.511200, 555.282016, 1110.564032, X, Y)
[Wed Jun 19 13:05:52 2013] Writing fullrun_pn_xmm0553440201_pi300-10000_pass1_cl_src11.gif
[Wed Jun 19 13:10:15 2013] Mean detx,y = (4250.26, 5764.33) 
[Wed Jun 19 13:10:17 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 13:10:28 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 13:10:28 2013] Setting source spectrum file to fullrun_pn_xmm0553440201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jun 19 13:10:28 2013] Setting bgd. spectrum file to fullrun_pn_xmm0553440201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Jun 19 13:12:47 2013] Not generating rmf since there are only 62 counts
[Wed Jun 19 13:12:47 2013] rmf not generated due to insufficient counts
[Wed Jun 19 13:15:38 2013] Updating aperture counts using extracted products
[Wed Jun 19 13:15:38 2013] Total counts from fullrun_pn_xmm0553440201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 73.00
[Wed Jun 19 13:15:38 2013] Total counts from fullrun_pn_xmm0553440201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 58.00
[Wed Jun 19 13:15:38 2013] Got source and background scale factors 353600.000000, 1986406.000000
[Wed Jun 19 13:15:38 2013] User source parameters:
  Position = (345.7, 235.8) = 22 36 20.79 22 26 45.1
  Extent = 5.6 (4.2-7.1)", rotation angle = 0
  Source aperture counts = 62.7 +/- 9.6
  Background aperture counts = 10.3
  Rate = 0.01 +/- 0.002

[Wed Jun 19 13:15:39 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 13:15:39 2013] Using photon index=1.80, rate=0.0124, arf fullrun_pn_xmm0553440201_pi300-10000_pass1_cl_src11.arf
[Wed Jun 19 13:15:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 13:15:39 2013] Updating source flux to 5.6e-14
[Wed Jun 19 13:15:44 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 19 13:15:45 2013] xmm0553440201/analysis//spectral/fullrun_pn_xmm0553440201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete