[Sun Sep 25 10:28:15 2011] Detection parameters:
  Position = (273.0, 231.0) = 2 41 7.13 -8 19 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.3 +/- 16.1
  Background counts = 68.7
  Rate = 0.002 +/- 0.0004

[Sun Sep 25 10:28:16 2011] Off-axis axis estimate = 5.23'
[Sun Sep 25 10:32:19 2011] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 10:32:19 2011] Initial guess for spatial extent in simple fitting = 9.04"
[Sun Sep 25 10:32:19 2011] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.354
[Sun Sep 25 10:32:19 2011] Giving source the simple spatial ID 69 for pass 0, mean size = 9.04"
[Sun Sep 25 13:16:19 2011] fullrun_pn_xmm0553300401_pi300-10000_cl_pass0_src69.ximg exists
[Sun Sep 25 13:16:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553300401_pi300-10000_cl_pass0_src69.csv
[Sun Sep 25 13:16:19 2011] fullrun_pn_xmm0553300401_pi300-10000_cl_pass0_src69_1.ximg exists
[Sun Sep 25 13:16:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553300401_pi300-10000_cl_pass0_src69.csv
[Sun Sep 25 13:16:19 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553300401_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553300401_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 13:16:20 2011] fullrun_pn_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Sun Sep 25 13:16:20 2011] fullrun_pn_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Sun Sep 25 13:16:20 2011] Fit fullrun_pn_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Sun Sep 25 14:40:43 2011] Source 74 is offset by -2.590963 and -7.273957 pixels which is larger than
2 X fitted extent = 2.495076 x 2.495076, not incorporating fit results
[Sun Sep 25 14:40:43 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 14:40:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 14:40:43 2011] Assessing source extent using major
[Sun Sep 25 14:40:43 2011] Source does appear to be extended
[Sun Sep 25 14:40:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 14:40:43 2011] Source is confused with source 72
[Sun Sep 25 14:41:05 2011] Using EEF radius (= 9.04 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 14:41:05 2011] Initial guess for spatial extent in simple fitting = 9.04"
[Sun Sep 25 14:41:05 2011] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.354
[Sun Sep 25 14:41:05 2011] Giving source the simple spatial ID 61 for pass 1, mean size = 9.04"
[Sun Sep 25 16:11:09 2011] fullrun_pn_xmm0553300401_pi300-10000_cl_pass1_src61.ximg exists
[Sun Sep 25 16:11:09 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553300401_pi300-10000_cl_pass1_src61.csv
[Sun Sep 25 16:11:09 2011] fullrun_pn_xmm0553300401_pi300-10000_cl_pass1_src61_1.ximg exists
[Sun Sep 25 16:11:09 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0553300401_pi300-10000_cl_pass1_src61.csv
[Sun Sep 25 16:11:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553300401_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553300401_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 16:11:09 2011] fullrun_pn_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sun Sep 25 16:11:09 2011] fullrun_pn_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sun Sep 25 16:11:09 2011] Fit fullrun_pn_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Sun Sep 25 17:28:11 2011] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 17.571940 pixels away
[Sun Sep 25 17:28:11 2011] Source 74 is offset by -2.601308 and -7.264463 pixels which is larger than
2 X fitted extent = 2.547825 x 2.547825, not incorporating fit results
[Sun Sep 25 17:28:11 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 17:28:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 17:28:11 2011] Assessing source extent using major
[Sun Sep 25 17:28:11 2011] Source does appear to be extended
[Sun Sep 25 17:28:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 17:28:34 2011] XMMSAS src. selection expression = ellipse(23702.452209, 20047.489761, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Sep 25 17:28:34 2011] Writing source region out to fullrun_pn_xmm0553300401_pi300-10000_pass1_cl_src74_src.reg
[Sun Sep 25 17:28:34 2011] Extracting stamp from image fullrun_pn_xmm0553300401_pi300-10000_cl_sm2.00.img.gz, (235, 193) - (310, 268)
[Sun Sep 25 17:28:34 2011] XMMSAS bgd. selection expression = annulus(23702.452209, 20047.489761, 1087.500000, 2175.000000, X, Y) && !ellipse(22825.945565, 23263.714058, 1424.104041, 1424.104041, 227.330348, X, Y) && !ellipse(22851.857400, 22529.627000, 915.408026, 915.408026, 0.000000, X, Y) && !ellipse(23812.347000, 21863.455400, 420.066412, 420.066412, 0.000000, X, Y) && !ellipse(21455.651080, 21327.973000, 514.304015, 514.304015, 0.000000, X, Y) && !ellipse(23925.212600, 20662.589400, 398.758411, 398.758411, 0.000000, X, Y) && !ellipse(26551.962402, 18207.691193, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep 25 17:28:34 2011] Writing fullrun_pn_xmm0553300401_pi300-10000_pass1_cl_src74.gif
[Sun Sep 25 18:09:31 2011] Mean detx,y = (-247.43, -4716.16) 
[Sun Sep 25 18:09:33 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 18:09:45 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 18:09:46 2011] Setting source spectrum file to fullrun_pn_xmm0553300401_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Sun Sep 25 18:09:46 2011] Setting bgd. spectrum file to fullrun_pn_xmm0553300401_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Sun Sep 25 19:50:53 2011] Not generating rmf since there are only 87 counts
[Sun Sep 25 19:50:53 2011] rmf not generated due to insufficient counts
[Sun Sep 25 21:06:21 2011] Updating aperture counts using extracted products
[Sun Sep 25 21:06:21 2011] Error reading totcts from fullrun_pn_xmm0553300401_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Sun Sep 25 21:06:22 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 21:06:22 2011] Using photon index=1.80, rate=0.0022, arf fullrun_pn_xmm0553300401_pi300-10000_pass1_cl_src74.arf
[Sun Sep 25 21:06:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 21:06:22 2011] Updating source flux to 7.2e-15
[Sun Sep 25 21:07:48 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting