[Sun Sep 25 10:29:15 2011] Detection parameters:
  Position = (244.0, 390.8) = 2 41 15.63 -8 7 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.0 +/- 12.2
  Background counts = 20.6
  Rate = 0.002 +/- 0.0004

[Sun Sep 25 10:29:16 2011] Off-axis axis estimate = 7.77'
[Sun Sep 25 13:54:56 2011] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 13:54:56 2011] Initial guess for spatial extent in simple fitting = 10.31"
[Sun Sep 25 13:54:56 2011] source mask rpix=2.4, npix_max = 32, mask sum = 31, frac = 0.940
[Sun Sep 25 13:54:56 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 10.31"
[Sun Sep 25 14:40:32 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_src16.ximg exists
[Sun Sep 25 14:40:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_src16.csv
[Sun Sep 25 14:40:32 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Sep 25 14:40:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_src16.csv
[Sun Sep 25 14:40:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 14:40:33 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Sep 25 14:40:33 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Sep 25 14:40:33 2011] Fit fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Sep 25 14:40:52 2011] Source 7 is offset by 9.481237 and 1.700277 pixels which is larger than
2 X fitted extent = 1.185522 x 1.185522, not incorporating fit results
[Sun Sep 25 14:40:52 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 14:40:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 14:40:52 2011] Assessing source extent using major
[Sun Sep 25 14:40:52 2011] Source does appear to be extended
[Sun Sep 25 14:40:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 16:42:49 2011] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 16:42:49 2011] Initial guess for spatial extent in simple fitting = 10.31"
[Sun Sep 25 16:42:49 2011] source mask rpix=2.4, npix_max = 32, mask sum = 31, frac = 0.940
[Sun Sep 25 16:42:49 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 10.31"
[Sun Sep 25 17:28:01 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_src16.ximg exists
[Sun Sep 25 17:28:01 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Sep 25 17:28:01 2011] Fit fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_src16 appears to have run properly
[Sun Sep 25 17:28:01 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Sep 25 17:28:01 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Sep 25 17:28:01 2011] Fit fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sun Sep 25 17:28:20 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.586907 pixels away
[Sun Sep 25 17:28:20 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 17:28:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 17:28:20 2011] Assessing source extent using major
[Sun Sep 25 17:28:20 2011] Source does appear to be extended
[Sun Sep 25 17:28:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 20:26:58 2011] XMMSAS src. selection expression = ellipse(21179.275650, 33947.360657, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Sep 25 20:26:58 2011] Writing source region out to fullrun_mos2_xmm0553300401_pi300-10000_pass1_cl_src7_src.reg
[Sun Sep 25 20:26:58 2011] Extracting stamp from image fullrun_mos2_xmm0553300401_pi300-10000_cl_sm2.00.img.gz, (206, 353) - (281, 428)
[Sun Sep 25 20:26:58 2011] XMMSAS bgd. selection expression = annulus(21179.275650, 33947.360657, 1087.500000, 2175.000000, X, Y)
[Sun Sep 25 20:26:58 2011] Writing fullrun_mos2_xmm0553300401_pi300-10000_pass1_cl_src7.gif
[Sun Sep 25 20:29:44 2011] Mean detx,y = (-5314.57, -8303.77) 
[Sun Sep 25 20:29:45 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 20:29:56 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 20:29:56 2011] Setting source spectrum file to fullrun_mos2_xmm0553300401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Sep 25 20:29:56 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0553300401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Sep 25 21:01:17 2011] Not generating rmf since there are only 80 counts
[Sun Sep 25 21:01:17 2011] rmf not generated due to insufficient counts
[Sun Sep 25 21:06:23 2011] Updating aperture counts using extracted products
[Sun Sep 25 21:06:23 2011] Error reading totcts from fullrun_mos2_xmm0553300401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Sep 25 21:06:23 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 21:06:23 2011] Using photon index=1.80, rate=0.00242, arf fullrun_mos2_xmm0553300401_pi300-10000_pass1_cl_src7.arf
[Sun Sep 25 21:06:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 21:06:23 2011] Updating source flux to 3.7e-14
[Sun Sep 25 21:07:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting