[Sun Sep 25 10:29:16 2011] Detection parameters:
  Position = (263.8, 259.7) = 2 41 9.83 -8 16 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.1 +/- 11.2
  Background counts = 26.7
  Rate = 0.0009 +/- 0.0002

[Sun Sep 25 10:29:16 2011] Off-axis axis estimate = 3.77'
[Sun Sep 25 13:54:56 2011] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 13:54:56 2011] Initial guess for spatial extent in simple fitting = 8.31"
[Sun Sep 25 13:54:56 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.075
[Sun Sep 25 13:54:56 2011] Giving source the simple spatial ID 45 for pass 0, mean size = 8.31"
[Sun Sep 25 14:40:32 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_src45.ximg exists
[Sun Sep 25 14:40:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_src45.csv
[Sun Sep 25 14:40:33 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_src45_1.ximg exists
[Sun Sep 25 14:40:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_src45.csv
[Sun Sep 25 14:40:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 14:40:33 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sun Sep 25 14:40:33 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sun Sep 25 14:40:33 2011] Fit fullrun_mos2_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sun Sep 25 14:40:52 2011] Source 37 is offset by -7.792055 and 3.606311 pixels which is larger than
2 X fitted extent = 2.732621 x 2.732621, not incorporating fit results
[Sun Sep 25 14:40:52 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 14:40:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 14:40:52 2011] Assessing source extent using major
[Sun Sep 25 14:40:52 2011] Source does appear to be extended
[Sun Sep 25 14:40:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 16:42:49 2011] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 16:42:49 2011] Initial guess for spatial extent in simple fitting = 8.31"
[Sun Sep 25 16:42:49 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.075
[Sun Sep 25 16:42:49 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 8.31"
[Sun Sep 25 17:28:01 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_src45.ximg exists
[Sun Sep 25 17:28:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_src45.csv
[Sun Sep 25 17:28:01 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_src45_1.ximg exists
[Sun Sep 25 17:28:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_src45.csv
[Sun Sep 25 17:28:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 17:28:01 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sun Sep 25 17:28:01 2011] fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sun Sep 25 17:28:01 2011] Fit fullrun_mos2_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Sun Sep 25 17:28:20 2011] Source 37 is offset by -7.836584 and 3.624609 pixels which is larger than
2 X fitted extent = 2.734083 x 2.734083, not incorporating fit results
[Sun Sep 25 17:28:20 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 17:28:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 17:28:20 2011] Assessing source extent using major
[Sun Sep 25 17:28:20 2011] Source does appear to be extended
[Sun Sep 25 17:28:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 20:26:59 2011] XMMSAS src. selection expression = ellipse(22901.735199, 22543.739014, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Sep 25 20:26:59 2011] Writing source region out to fullrun_mos2_xmm0553300401_pi300-10000_pass1_cl_src37_src.reg
[Sun Sep 25 20:26:59 2011] Extracting stamp from image fullrun_mos2_xmm0553300401_pi300-10000_cl_sm2.00.img.gz, (226, 222) - (301, 297)
[Sun Sep 25 20:26:59 2011] XMMSAS bgd. selection expression = annulus(22901.735199, 22543.739014, 1087.500000, 2175.000000, X, Y) && !ellipse(24393.546520, 24549.263400, 465.344013, 465.344013, 0.000000, X, Y) && !ellipse(25398.965485, 24830.579468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25401.413422, 25530.105347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23622.934082, 24489.424133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21546.164680, 21288.727000, 392.172011, 392.172011, 0.000000, X, Y) && !ellipse(23786.016120, 21835.031200, 431.368012, 431.368012, 0.000000, X, Y)
[Sun Sep 25 20:26:59 2011] Writing fullrun_mos2_xmm0553300401_pi300-10000_pass1_cl_src37.gif
[Sun Sep 25 20:34:30 2011] Mean detx,y = (-1001.27, 2351.27) 
[Sun Sep 25 20:34:31 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 20:34:36 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 20:34:36 2011] Setting source spectrum file to fullrun_mos2_xmm0553300401_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun Sep 25 20:34:36 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0553300401_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun Sep 25 21:05:21 2011] Not generating rmf since there are only 44 counts
[Sun Sep 25 21:05:21 2011] rmf not generated due to insufficient counts
[Sun Sep 25 21:06:23 2011] Updating aperture counts using extracted products
[Sun Sep 25 21:06:23 2011] Error reading totcts from fullrun_mos2_xmm0553300401_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun Sep 25 21:06:24 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 21:06:24 2011] Using photon index=1.80, rate=0.000859, arf fullrun_mos2_xmm0553300401_pi300-10000_pass1_cl_src37.arf
[Sun Sep 25 21:06:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 21:06:24 2011] Updating source flux to 8.9e-15
[Sun Sep 25 21:07:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting