[Sun Sep 25 10:28:43 2011] Detection parameters:
  Position = (363.1, 250.0) = 2 40 40.74 -8 17 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.6 +/- 18.4
  Background counts = 23.5
  Rate = 0.005 +/- 0.0005

[Sun Sep 25 10:28:44 2011] Off-axis axis estimate = 5.85'
[Sun Sep 25 13:16:20 2011] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 13:16:20 2011] Initial guess for spatial extent in simple fitting = 9.36"
[Sun Sep 25 13:16:20 2011] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.281
[Sun Sep 25 13:16:20 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 9.36"
[Sun Sep 25 13:54:56 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_src4.ximg exists
[Sun Sep 25 13:54:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_src4.csv
[Sun Sep 25 13:54:56 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Sep 25 13:54:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_src4.csv
[Sun Sep 25 13:54:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 13:54:56 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Sep 25 13:54:56 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Sep 25 13:54:56 2011] Fit fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun Sep 25 14:40:47 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.702478 pixels away
[Sun Sep 25 14:40:47 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 14:40:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 14:40:47 2011] Assessing source extent using major
[Sun Sep 25 14:40:47 2011] Source does appear to be extended
[Sun Sep 25 14:40:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 14:40:47 2011] Source is confused with source 27
[Sun Sep 25 16:11:09 2011] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 16:11:09 2011] Initial guess for spatial extent in simple fitting = 9.36"
[Sun Sep 25 16:11:09 2011] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.281
[Sun Sep 25 16:11:09 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 9.36"
[Sun Sep 25 16:42:49 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_src4.ximg exists
[Sun Sep 25 16:42:49 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_src4.csv
[Sun Sep 25 16:42:49 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Sep 25 16:42:49 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_src4.csv
[Sun Sep 25 16:42:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 16:42:49 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Sep 25 16:42:49 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Sep 25 16:42:49 2011] Fit fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Sep 25 17:28:14 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 10.600319 pixels away
[Sun Sep 25 17:28:14 2011] Spatial fit model total counts = 517.995000, observed total counts = 518.000000
[Sun Sep 25 17:28:14 2011] Offset between fit and detection position for source 7 = 2.088711 pixels
[Sun Sep 25 17:28:14 2011] Warning, changing simple spatial fit ID from 4 to 10
[Sun Sep 25 17:28:14 2011] 511.885000 total counts/ 291.958000 bgd. counts: snr = 12.871180
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 2.088711 pixels
  Position = (362.9, 248.0) = 2 40 40.78 -8 17 53.4
  Extent = 9.6 (9.3-19.2)", rotation angle = 0
  Source counts = 219.9 +/- 22.6
  Background counts = 292.0
  Rate = 0.004 +/- 0.0004
[Sun Sep 25 17:28:15 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 17:28:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 17:28:15 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 17:28:15 2011] Source does appear to be extended
[Sun Sep 25 17:28:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 19:55:21 2011] XMMSAS src. selection expression = ellipse(31525.233200, 21523.466000, 575.454017, 575.454017, 0.000000, X, Y)
[Sun Sep 25 19:55:21 2011] Writing source region out to fullrun_mos1_xmm0553300401_pi300-10000_pass1_cl_src7_src.reg
[Sun Sep 25 19:55:21 2011] Extracting stamp from image fullrun_mos1_xmm0553300401_pi300-10000_cl_sm2.00.img.gz, (330, 215) - (396, 281)
[Sun Sep 25 19:55:21 2011] XMMSAS bgd. selection expression = annulus(31525.233200, 21523.466000, 959.090028, 1918.180055, X, Y) && !ellipse(31559.659400, 21210.429400, 383.636011, 383.636011, 0.000000, X, Y)
[Sun Sep 25 19:55:21 2011] Writing fullrun_mos1_xmm0553300401_pi300-10000_pass1_cl_src7.gif
[Sun Sep 25 19:57:04 2011] Mean detx,y = (1592.45, -7840.21) 
[Sun Sep 25 19:57:05 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 19:57:22 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 19:57:22 2011] Setting source spectrum file to fullrun_mos1_xmm0553300401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Sep 25 19:57:22 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0553300401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Sep 25 21:06:22 2011] Updating aperture counts using extracted products
[Sun Sep 25 21:06:22 2011] Error reading totcts from fullrun_mos1_xmm0553300401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Sep 25 21:06:22 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 21:06:22 2011] Using photon index=1.80, rate=0.00375, arf fullrun_mos1_xmm0553300401_pi300-10000_pass1_cl_src7.arf
[Sun Sep 25 21:06:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 21:06:22 2011] Updating source flux to 5.7e-14
[Sun Sep 25 21:06:25 2011] Flag c found in src. 7 procflags, skipping spectral fitting