[Sun Sep 25 10:28:44 2011] Detection parameters:
  Position = (186.0, 147.7) = 2 41 32.64 -8 25 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.7 +/- 12.7
  Background counts = 22.2
  Rate = 0.001 +/- 0.0002

[Sun Sep 25 10:28:44 2011] Off-axis axis estimate = 13.63'
[Sun Sep 25 13:16:20 2011] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 13:16:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 13:16:20 2011] Initial guess for spatial extent in simple fitting = 13.25"
[Sun Sep 25 13:16:20 2011] source mask rpix=3.0, npix_max = 50, mask sum = 56, frac = 1.114
[Sun Sep 25 13:16:20 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 13.25"
[Sun Sep 25 13:54:56 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_src29.ximg exists
[Sun Sep 25 13:54:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_src29.csv
[Sun Sep 25 13:54:56 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Sep 25 13:54:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_src29.csv
[Sun Sep 25 13:54:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 13:54:56 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Sep 25 13:54:56 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Sep 25 13:54:56 2011] Fit fullrun_mos1_xmm0553300401_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun Sep 25 14:40:47 2011] Spatial fit model total counts = 407.000000, observed total counts = 407.000000
[Sun Sep 25 14:40:47 2011] Offset between fit and detection position for source 35 = 0.104257 pixels
[Sun Sep 25 14:40:47 2011] 323.873800 total counts/ 271.625000 bgd. counts: snr = 3.170235
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.104257 pixels
  Position = (186.1, 147.8) = 2 41 32.62 -8 25 9.1
  Extent = 6.9 (3.3-9.9)", rotation angle = 0
  Source counts = 52.2 +/- 18.0
  Background counts = 271.6
  Rate = 0.0009 +/- 0.0003
[Sun Sep 25 14:40:47 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 14:40:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 14:40:47 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 14:40:47 2011] Source does appear to be extended
[Sun Sep 25 14:40:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 14:40:47 2011] Source is confused with source 36
[Sun Sep 25 16:11:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 16:11:09 2011] Initial guess for spatial extent in simple fitting = 6.90"
[Sun Sep 25 16:11:09 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.919
[Sun Sep 25 16:11:09 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 6.90"
[Sun Sep 25 16:42:49 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_src29.ximg exists
[Sun Sep 25 16:42:49 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Sep 25 16:42:49 2011] Fit fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_src29 appears to have run properly
[Sun Sep 25 16:42:49 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Sep 25 16:42:49 2011] fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Sep 25 16:42:49 2011] Fit fullrun_mos1_xmm0553300401_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun Sep 25 17:28:15 2011] Spatial fit model total counts = 320.733000, observed total counts = 321.000000
[Sun Sep 25 17:28:15 2011] Offset between fit and detection position for source 35 = 0.086438 pixels
[Sun Sep 25 17:28:15 2011] 271.999600 total counts/ 221.719000 bgd. counts: snr = 3.376751
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.086438 pixels
  Position = (186.0, 147.8) = 2 41 32.64 -8 25 8.9
  Extent = 6.8 (1.8-10.0)", rotation angle = 0
  Source counts = 50.3 +/- 16.5
  Background counts = 221.7
  Rate = 0.0009 +/- 0.0003
[Sun Sep 25 17:28:15 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 17:28:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 17:28:15 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 17:28:15 2011] Source does appear to be extended
[Sun Sep 25 17:28:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 19:55:21 2011] XMMSAS src. selection expression = ellipse(16134.242500, 12810.811600, 409.495212, 409.495212, 0.000000, X, Y)
[Sun Sep 25 19:55:21 2011] Writing source region out to fullrun_mos1_xmm0553300401_pi300-10000_pass1_cl_src35_src.reg
[Sun Sep 25 19:55:21 2011] Extracting stamp from image fullrun_mos1_xmm0553300401_pi300-10000_cl_sm2.00.img.gz, (162, 124) - (210, 171)
[Sun Sep 25 19:55:21 2011] XMMSAS bgd. selection expression = annulus(16134.242500, 12810.811600, 682.492020, 1364.984039, X, Y) && !ellipse(15546.263275, 12770.776627, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep 25 19:55:21 2011] Writing fullrun_mos1_xmm0553300401_pi300-10000_pass1_cl_src35.gif
[Sun Sep 25 20:01:23 2011] Mean detx,y = (13599.73, 5152.26) 
[Sun Sep 25 20:01:24 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 20:01:29 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 20:01:29 2011] Setting source spectrum file to fullrun_mos1_xmm0553300401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun Sep 25 20:01:29 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0553300401_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sun Sep 25 20:26:42 2011] Not generating rmf since there are only 50 counts
[Sun Sep 25 20:26:42 2011] rmf not generated due to insufficient counts
[Sun Sep 25 21:06:22 2011] Updating aperture counts using extracted products
[Sun Sep 25 21:06:22 2011] Error reading totcts from fullrun_mos1_xmm0553300401_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sun Sep 25 21:06:23 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 21:06:23 2011] Using photon index=1.80, rate=0.000856, arf fullrun_mos1_xmm0553300401_pi300-10000_pass1_cl_src35.arf
[Sun Sep 25 21:06:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 21:06:23 2011] Updating source flux to 2e-14
[Sun Sep 25 21:06:25 2011] Flag c found in src. 35 procflags, skipping spectral fitting
[Sun Sep 25 21:06:25 2011] Source 35 has fewer than 100.000000 counts, skipping spectral fitting