[Tue Mar 13 09:59:35 2012] Detection parameters:
  Position = (344.9, 307.3) = 2 40 56.94 -8 15 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.6 +/- 11.9
  Background counts = 26.9
  Rate = 0.001 +/- 0.0002

[Tue Mar 13 09:59:36 2012] Off-axis axis estimate = 3.43'
[Tue Mar 13 10:00:35 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:00:35 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Tue Mar 13 10:00:35 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.889
[Tue Mar 13 10:00:35 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.14"
[Tue Mar 13 10:00:37 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_src32.ximg exists
[Tue Mar 13 10:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_src32.csv
[Tue Mar 13 10:00:37 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Mar 13 10:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_src32.csv
[Tue Mar 13 10:00:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:00:38 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Mar 13 10:00:38 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Mar 13 10:00:38 2012] Fit fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Tue Mar 13 10:01:21 2012] Spatial fit model total counts = 330.001000, observed total counts = 330.000000
[Tue Mar 13 10:01:21 2012] Offset between fit and detection position for source 29 = 0.161979 pixels
[Tue Mar 13 10:01:21 2012] 327.453900 total counts/ 291.414000 bgd. counts: snr = 2.111195
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.161979 pixels
  Position = (344.7, 307.3) = 2 40 56.98 -8 15 38.0
  Extent = 5.4 (3.1-8.2)", rotation angle = 0
  Source counts = 36.0 +/- 18.1
  Background counts = 291.4
  Rate = 0.0007 +/- 0.0004
[Tue Mar 13 10:01:21 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:01:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:01:21 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:01:21 2012] Source does appear to be extended
[Tue Mar 13 10:01:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:01:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:01:55 2012] Initial guess for spatial extent in simple fitting = 5.38"
[Tue Mar 13 10:01:55 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.746
[Tue Mar 13 10:01:55 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 5.38"
[Tue Mar 13 10:01:56 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_src31.ximg exists
[Tue Mar 13 10:01:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_src31.csv
[Tue Mar 13 10:01:56 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_src31_1.ximg exists
[Tue Mar 13 10:01:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_src31.csv
[Tue Mar 13 10:01:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:01:56 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Tue Mar 13 10:01:56 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Tue Mar 13 10:01:56 2012] Fit fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Tue Mar 13 10:02:34 2012] Spatial fit model total counts = 329.533000, observed total counts = 330.000000
[Tue Mar 13 10:02:34 2012] Offset between fit and detection position for source 29 = 0.023639 pixels
[Tue Mar 13 10:02:34 2012] 327.007200 total counts/ 291.577000 bgd. counts: snr = 2.074899
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.023639 pixels
  Position = (344.7, 307.3) = 2 40 56.98 -8 15 38.1
  Extent = 5.4 (3.0-8.3)", rotation angle = 0
  Source counts = 35.4 +/- 18.1
  Background counts = 291.6
  Rate = 0.0007 +/- 0.0004
[Tue Mar 13 10:02:34 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:02:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:02:34 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:02:34 2012] Source does appear to be extended
[Tue Mar 13 10:02:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:04:01 2012] XMMSAS src. selection expression = ellipse(29943.807200, 26688.597200, 321.175809, 321.175809, 0.000000, X, Y)
[Tue Mar 13 10:04:01 2012] Not overwriting source region fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29_src.reg
[Tue Mar 13 10:04:01 2012] Extracting stamp from image fullrun_mos2_xmm0553300301_pi300-10000_cl_sm2.00.img.gz, (326, 289) - (363, 326)
[Tue Mar 13 10:04:01 2012] XMMSAS bgd. selection expression = annulus(29943.807200, 26688.597200, 535.293015, 1070.586031, X, Y) && !ellipse(28665.660431, 28055.497528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28619.993927, 27181.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28084.129364, 26036.581390, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 10:04:01 2012] Writing fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29.gif
[Tue Mar 13 10:04:02 2012] ../../xmm0553300301/products/events/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0553300301/products/events/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Tue Mar 13 10:04:02 2012] Mean detx,y = (-2185.12, 664.61) 
[Tue Mar 13 10:04:02 2012] ../../xmm0553300301/products/images/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29_src.img and ../../xmm0553300301/products/images/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Tue Mar 13 10:04:02 2012] ../../xmm0553300301/products/spectra/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0553300301/products/spectra/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Tue Mar 13 10:04:02 2012] Setting source spectrum file to fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Mar 13 10:04:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Mar 13 10:04:02 2012] ../../xmm0553300301/products/lightcurves/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0553300301/products/lightcurves/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Tue Mar 13 10:04:14 2012] Not generating rmf since there are only 35 counts
[Tue Mar 13 10:04:14 2012] rmf not generated due to insufficient counts
[Tue Mar 13 10:04:14 2012] fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Tue Mar 13 10:06:01 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:06:01 2012] Error reading totcts from fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Mar 13 10:06:03 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:06:03 2012] Using photon index=1.80, rate=0.000693, arf fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src29.arf
[Tue Mar 13 10:06:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:06:03 2012] Updating source flux to 8.1e-15
[Tue Mar 13 10:06:11 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting