[Tue Mar 13 09:59:35 2012] Detection parameters:
  Position = (329.5, 313.0) = 2 41 1.44 -8 15 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.7 +/- 14.7
  Background counts = 27.4
  Rate = 0.002 +/- 0.0003

[Tue Mar 13 09:59:36 2012] Off-axis axis estimate = 2.49'
[Tue Mar 13 10:00:35 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:00:35 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Tue Mar 13 10:00:35 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.585
[Tue Mar 13 10:00:35 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.67"
[Tue Mar 13 10:00:37 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_src21.ximg exists
[Tue Mar 13 10:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_src21.csv
[Tue Mar 13 10:00:37 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Mar 13 10:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_src21.csv
[Tue Mar 13 10:00:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:00:37 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Mar 13 10:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Tue Mar 13 10:00:37 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Mar 13 10:00:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Tue Mar 13 10:00:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:01:21 2012] Warning, spatial fit 21 centroid is now closest to src. 23
[Tue Mar 13 10:01:21 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:01:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:01:21 2012] Assessing source extent using major
[Tue Mar 13 10:01:21 2012] Source does appear to be extended
[Tue Mar 13 10:01:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:01:55 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:01:55 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Tue Mar 13 10:01:55 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.585
[Tue Mar 13 10:01:55 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.67"
[Tue Mar 13 10:01:56 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_src20.ximg exists
[Tue Mar 13 10:01:56 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue Mar 13 10:01:56 2012] Fit fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_src20 appears to have run properly
[Tue Mar 13 10:01:56 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue Mar 13 10:01:56 2012] fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Mar 13 10:01:56 2012] Fit fullrun_mos2_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Tue Mar 13 10:02:34 2012] Source 27 is offset by 7.578298 and 0.995309 pixels which is larger than
2 X fitted extent = 3.117766 x 3.117766, not incorporating fit results
[Tue Mar 13 10:02:34 2012] Source 27 is offset by 2.774321 and 2.731660 pixels which is larger than
2 X fitted extent = 2.372676 x 2.372676, not incorporating fit results
[Tue Mar 13 10:02:34 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:02:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:02:34 2012] Assessing source extent using major
[Tue Mar 13 10:02:34 2012] Source does appear to be extended
[Tue Mar 13 10:02:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:04:00 2012] XMMSAS src. selection expression = ellipse(28619.993927, 27181.026459, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 10:04:00 2012] Not overwriting source region fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27_src.reg
[Tue Mar 13 10:04:00 2012] Extracting stamp from image fullrun_mos2_xmm0553300301_pi300-10000_cl_sm2.00.img.gz, (292, 275) - (367, 350)
[Tue Mar 13 10:04:00 2012] XMMSAS bgd. selection expression = annulus(28619.993927, 27181.026459, 1087.500000, 2175.000000, X, Y) && !ellipse(27633.242060, 27019.003400, 459.195213, 459.195213, 0.000000, X, Y) && !ellipse(28665.660431, 28055.497528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27503.474457, 27857.461548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29943.807200, 26688.597200, 428.234412, 428.234412, 0.000000, X, Y) && !ellipse(28084.129364, 26036.581390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26093.043243, 24770.381989, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 10:04:00 2012] Writing fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27.gif
[Tue Mar 13 10:04:02 2012] ../../xmm0553300301/products/events/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0553300301/products/events/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Tue Mar 13 10:04:02 2012] Mean detx,y = (-651.28, 524.78) 
[Tue Mar 13 10:04:02 2012] ../../xmm0553300301/products/images/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27_src.img and ../../xmm0553300301/products/images/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Tue Mar 13 10:04:02 2012] ../../xmm0553300301/products/spectra/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0553300301/products/spectra/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Tue Mar 13 10:04:02 2012] Setting source spectrum file to fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Mar 13 10:04:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue Mar 13 10:04:02 2012] ../../xmm0553300301/products/lightcurves/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0553300301/products/lightcurves/fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Tue Mar 13 10:04:14 2012] Not generating rmf since there are only 86 counts
[Tue Mar 13 10:04:14 2012] rmf not generated due to insufficient counts
[Tue Mar 13 10:04:14 2012] fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27.arf exists, delete to re-create
[Tue Mar 13 10:06:01 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:06:01 2012] Error reading totcts from fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Mar 13 10:06:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:06:02 2012] Using photon index=1.80, rate=0.002, arf fullrun_mos2_xmm0553300301_pi300-10000_pass1_cl_src27.arf
[Tue Mar 13 10:06:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:06:02 2012] Updating source flux to 2.1e-14
[Tue Mar 13 10:06:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting