[Tue Mar 13 09:59:32 2012] Detection parameters:
  Position = (376.6, 139.1) = 2 40 47.63 -8 27 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.4 +/- 12.8
  Background counts = 19.2
  Rate = 0.001 +/- 0.0002

[Tue Mar 13 09:59:32 2012] Off-axis axis estimate = 12.87'
[Tue Mar 13 10:00:33 2012] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:00:33 2012] Initial guess for spatial extent in simple fitting = 12.86"
[Tue Mar 13 10:00:33 2012] source mask rpix=3.0, npix_max = 47, mask sum = 47, frac = 0.983
[Tue Mar 13 10:00:33 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 12.86"
[Tue Mar 13 10:00:35 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src19.ximg exists
[Tue Mar 13 10:00:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src19.csv
[Tue Mar 13 10:00:35 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src19_1.ximg exists
[Tue Mar 13 10:00:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src19.csv
[Tue Mar 13 10:00:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:00:35 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Tue Mar 13 10:00:35 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Tue Mar 13 10:00:35 2012] Fit fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Tue Mar 13 10:01:10 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 12.335516 pixels away
[Tue Mar 13 10:01:11 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:01:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:01:11 2012] Assessing source extent using major
[Tue Mar 13 10:01:11 2012] Source does appear to be extended
[Tue Mar 13 10:01:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:01:53 2012] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:01:53 2012] Initial guess for spatial extent in simple fitting = 12.86"
[Tue Mar 13 10:01:53 2012] source mask rpix=3.0, npix_max = 47, mask sum = 47, frac = 0.983
[Tue Mar 13 10:01:53 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 12.86"
[Tue Mar 13 10:01:54 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src19.ximg exists
[Tue Mar 13 10:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src19.csv
[Tue Mar 13 10:01:54 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Mar 13 10:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src19.csv
[Tue Mar 13 10:01:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:01:55 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Mar 13 10:01:55 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Mar 13 10:01:55 2012] Fit fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Mar 13 10:02:25 2012] Spatial fit model total counts = 280.916000, observed total counts = 281.000000
[Tue Mar 13 10:02:25 2012] Offset between fit and detection position for source 30 = 0.382357 pixels
[Tue Mar 13 10:02:25 2012] 278.770400 total counts/ 239.560000 bgd. counts: snr = 2.533344
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.382357 pixels
  Position = (376.8, 139.5) = 2 40 47.58 -8 27 48.3
  Extent = 4.1 (3.2-8.0)", rotation angle = 0
  Source counts = 39.2 +/- 16.7
  Background counts = 239.6
  Rate = 0.0008 +/- 0.0003
[Tue Mar 13 10:02:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:02:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:02:25 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:02:25 2012] Source does appear to be extended
[Tue Mar 13 10:02:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:03:47 2012] XMMSAS src. selection expression = ellipse(32731.542000, 12084.959600, 245.690407, 245.690407, 0.000000, X, Y)
[Tue Mar 13 10:03:47 2012] Not overwriting source region fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30_src.reg
[Tue Mar 13 10:03:47 2012] Extracting stamp from image fullrun_mos1_xmm0553300301_pi300-10000_cl_sm2.00.img.gz, (363, 125) - (391, 154)
[Tue Mar 13 10:03:47 2012] XMMSAS bgd. selection expression = annulus(32731.542000, 12084.959600, 409.484012, 818.968024, X, Y)
[Tue Mar 13 10:03:47 2012] Writing fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30.gif
[Tue Mar 13 10:03:52 2012] ../../xmm0553300301/products/events/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0553300301/products/events/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create
[Tue Mar 13 10:03:52 2012] Mean detx,y = (-11460.31, 10308.83) 
[Tue Mar 13 10:03:52 2012] ../../xmm0553300301/products/images/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30_src.img and ../../xmm0553300301/products/images/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create
[Tue Mar 13 10:03:52 2012] ../../xmm0553300301/products/spectra/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30_src_b10.pi.gz and ../../xmm0553300301/products/spectra/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create
[Tue Mar 13 10:03:52 2012] Setting source spectrum file to fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Mar 13 10:03:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Tue Mar 13 10:03:52 2012] ../../xmm0553300301/products/lightcurves/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0553300301/products/lightcurves/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create
[Tue Mar 13 10:03:59 2012] Not generating rmf since there are only 39 counts
[Tue Mar 13 10:03:59 2012] rmf not generated due to insufficient counts
[Tue Mar 13 10:03:59 2012] fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30.arf exists, delete to re-create
[Tue Mar 13 10:05:56 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:05:56 2012] Error reading totcts from fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Tue Mar 13 10:05:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:05:59 2012] Using photon index=1.80, rate=0.000768, arf fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src30.arf
[Tue Mar 13 10:05:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:05:59 2012] Updating source flux to 2.9e-14
[Tue Mar 13 10:06:10 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting