[Tue Mar 13 09:59:28 2012] Detection parameters:
  Position = (329.7, 322.6) = 2 41 1.39 -8 14 30.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.7 +/- 14.5
  Background counts = 29.0
  Rate = 0.002 +/- 0.0003

[Tue Mar 13 09:59:32 2012] Off-axis axis estimate = 2.87'
[Tue Mar 13 10:00:33 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:00:33 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Tue Mar 13 10:00:33 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.174
[Tue Mar 13 10:00:33 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.86"
[Tue Mar 13 10:00:35 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src16.ximg exists
[Tue Mar 13 10:00:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src16.csv
[Tue Mar 13 10:00:35 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Mar 13 10:00:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src16.csv
[Tue Mar 13 10:00:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:00:35 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Mar 13 10:00:35 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Mar 13 10:00:35 2012] Fit fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Mar 13 10:01:10 2012] Spatial fit model total counts = 624.223000, observed total counts = 622.000000
[Tue Mar 13 10:01:10 2012] Offset between fit and detection position for source 18 = 7.374188 pixels
[Tue Mar 13 10:01:10 2012] 612.961000 total counts/ 456.391000 bgd. counts: snr = 7.328921
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 7.374188 pixels
  Position = (325.2, 316.8) = 2 41 2.71 -8 14 57.0
  Extent = 15.7 (15.7-31.4)", rotation angle = 0
  Source counts = 156.6 +/- 24.8
  Background counts = 456.4
  Rate = 0.003 +/- 0.0005
[Tue Mar 13 10:01:11 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:01:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:01:11 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:01:11 2012] Source does appear to be extended
[Tue Mar 13 10:01:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:01:11 2012] Source is confused with source 1
[Tue Mar 13 10:01:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:01:53 2012] Initial guess for spatial extent in simple fitting = 15.72"
[Tue Mar 13 10:01:53 2012] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.945
[Tue Mar 13 10:01:53 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 15.72"
[Tue Mar 13 10:01:54 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src16.ximg exists
[Tue Mar 13 10:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src16.csv
[Tue Mar 13 10:01:54 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Mar 13 10:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src16.csv
[Tue Mar 13 10:01:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:01:55 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Mar 13 10:01:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Mar 13 10:01:55 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Mar 13 10:01:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Mar 13 10:01:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:02:25 2012] Warning, spatial fit 16 centroid is now closest to src. 19
[Tue Mar 13 10:02:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:02:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:02:25 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:02:25 2012] Source does appear to be extended
[Tue Mar 13 10:02:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:03:47 2012] XMMSAS src. selection expression = ellipse(28244.482000, 27510.606000, 943.344027, 943.344027, 0.000000, X, Y)
[Tue Mar 13 10:03:47 2012] Not overwriting source region fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18_src.reg
[Tue Mar 13 10:03:47 2012] Extracting stamp from image fullrun_mos1_xmm0553300301_pi300-10000_cl_sm2.00.img.gz, (271, 263) - (379, 371)
[Tue Mar 13 10:03:47 2012] XMMSAS bgd. selection expression = annulus(28244.482000, 27510.606000, 1572.240045, 3144.480090, X, Y) && !ellipse(27627.822340, 27008.975600, 450.369613, 450.369613, 0.000000, X, Y) && !ellipse(27298.022547, 30778.571736, 1352.880039, 415.379318, 91.811428, X, Y) && !ellipse(24636.467621, 28032.762512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26105.128200, 24840.941200, 651.462419, 651.462419, 0.000000, X, Y) && !ellipse(26446.865000, 28707.755800, 509.400815, 509.400815, 0.000000, X, Y)
[Tue Mar 13 10:03:47 2012] Writing fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18.gif
[Tue Mar 13 10:03:51 2012] ../../xmm0553300301/products/events/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0553300301/products/events/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Tue Mar 13 10:03:52 2012] Mean detx,y = (396.56, -147.61) 
[Tue Mar 13 10:03:52 2012] ../../xmm0553300301/products/images/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18_src.img and ../../xmm0553300301/products/images/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Tue Mar 13 10:03:52 2012] ../../xmm0553300301/products/spectra/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0553300301/products/spectra/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Tue Mar 13 10:03:52 2012] Setting source spectrum file to fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Mar 13 10:03:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Mar 13 10:03:52 2012] ../../xmm0553300301/products/lightcurves/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0553300301/products/lightcurves/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Tue Mar 13 10:03:59 2012] fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18.rmf exists, delete to re-create
[Tue Mar 13 10:03:59 2012] fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Tue Mar 13 10:05:55 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:05:55 2012] Error reading totcts from fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Mar 13 10:05:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:05:59 2012] Using photon index=1.80, rate=0.00307, arf fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src18.arf
[Tue Mar 13 10:05:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:05:59 2012] Updating source flux to 2.9e-14
[Tue Mar 13 10:06:10 2012] Flag c found in src. 18 procflags, skipping spectral fitting