[Tue Mar 13 09:59:28 2012] Detection parameters:
  Position = (304.5, 330.7) = 2 41 8.77 -8 13 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.6 +/- 12.0
  Background counts = 28.1
  Rate = 0.001 +/- 0.0003

[Tue Mar 13 09:59:32 2012] Off-axis axis estimate = 2.38'
[Tue Mar 13 10:00:33 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:00:33 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Tue Mar 13 10:00:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.233
[Tue Mar 13 10:00:33 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.62"
[Tue Mar 13 10:00:35 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src23.ximg exists
[Tue Mar 13 10:00:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src23.csv
[Tue Mar 13 10:00:35 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue Mar 13 10:00:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src23.csv
[Tue Mar 13 10:00:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:00:35 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue Mar 13 10:00:35 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue Mar 13 10:00:35 2012] Fit fullrun_mos1_xmm0553300301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Tue Mar 13 10:01:10 2012] Spatial fit model total counts = 288.992000, observed total counts = 289.000000
[Tue Mar 13 10:01:10 2012] Offset between fit and detection position for source 17 = 0.167384 pixels
[Tue Mar 13 10:01:10 2012] 286.218200 total counts/ 247.023000 bgd. counts: snr = 2.493815
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.167384 pixels
  Position = (304.5, 330.5) = 2 41 8.76 -8 13 57.2
  Extent = 6.4 (2.2-10.5)", rotation angle = 0
  Source counts = 39.2 +/- 16.9
  Background counts = 247.0
  Rate = 0.0008 +/- 0.0003
[Tue Mar 13 10:01:11 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:01:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:01:11 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:01:11 2012] Source does appear to be extended
[Tue Mar 13 10:01:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:01:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:01:53 2012] Initial guess for spatial extent in simple fitting = 6.37"
[Tue Mar 13 10:01:53 2012] source mask rpix=1.5, npix_max = 15, mask sum = 12, frac = 0.778
[Tue Mar 13 10:01:53 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 6.37"
[Tue Mar 13 10:01:54 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src23.ximg exists
[Tue Mar 13 10:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src23.csv
[Tue Mar 13 10:01:54 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src23_1.ximg exists
[Tue Mar 13 10:01:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src23.csv
[Tue Mar 13 10:01:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:01:55 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Tue Mar 13 10:01:55 2012] fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Tue Mar 13 10:01:55 2012] Fit fullrun_mos1_xmm0553300301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Tue Mar 13 10:02:25 2012] Spatial fit model total counts = 289.289000, observed total counts = 289.000000
[Tue Mar 13 10:02:25 2012] Offset between fit and detection position for source 17 = 0.004122 pixels
[Tue Mar 13 10:02:25 2012] 286.856900 total counts/ 248.219000 bgd. counts: snr = 2.452427
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.004122 pixels
  Position = (304.5, 330.5) = 2 41 8.76 -8 13 57.2
  Extent = 6.4 (2.2-10.5)", rotation angle = 0
  Source counts = 38.6 +/- 16.9
  Background counts = 248.2
  Rate = 0.0008 +/- 0.0003
[Tue Mar 13 10:02:25 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:02:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:02:25 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:02:25 2012] Source does appear to be extended
[Tue Mar 13 10:02:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:03:47 2012] XMMSAS src. selection expression = ellipse(26446.865000, 28707.755800, 382.050611, 382.050611, 0.000000, X, Y)
[Tue Mar 13 10:03:47 2012] Not overwriting source region fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17_src.reg
[Tue Mar 13 10:03:47 2012] Extracting stamp from image fullrun_mos1_xmm0553300301_pi300-10000_cl_sm2.00.img.gz, (283, 309) - (327, 352)
[Tue Mar 13 10:03:47 2012] XMMSAS bgd. selection expression = annulus(26446.865000, 28707.755800, 636.751018, 1273.502037, X, Y) && !ellipse(27627.822340, 27008.975600, 450.369613, 450.369613, 0.000000, X, Y) && !ellipse(27298.022547, 30778.571736, 1352.880039, 415.379318, 91.811428, X, Y) && !ellipse(24636.467621, 28032.762512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28244.482000, 27510.606000, 1257.792036, 1257.792036, 0.000000, X, Y)
[Tue Mar 13 10:03:47 2012] Writing fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17.gif
[Tue Mar 13 10:03:52 2012] ../../xmm0553300301/products/events/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0553300301/products/events/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Tue Mar 13 10:03:52 2012] Mean detx,y = (1383.50, -1956.83) 
[Tue Mar 13 10:03:52 2012] ../../xmm0553300301/products/images/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17_src.img and ../../xmm0553300301/products/images/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Tue Mar 13 10:03:52 2012] ../../xmm0553300301/products/spectra/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0553300301/products/spectra/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Tue Mar 13 10:03:52 2012] Setting source spectrum file to fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Mar 13 10:03:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Mar 13 10:03:52 2012] ../../xmm0553300301/products/lightcurves/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0553300301/products/lightcurves/fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Tue Mar 13 10:03:59 2012] Not generating rmf since there are only 38 counts
[Tue Mar 13 10:03:59 2012] rmf not generated due to insufficient counts
[Tue Mar 13 10:03:59 2012] fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17.arf exists, delete to re-create
[Tue Mar 13 10:05:56 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:05:56 2012] Error reading totcts from fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Mar 13 10:05:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:05:59 2012] Using photon index=1.80, rate=0.000757, arf fullrun_mos1_xmm0553300301_pi300-10000_pass1_cl_src17.arf
[Tue Mar 13 10:05:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:05:59 2012] Updating source flux to 9e-15
[Tue Mar 13 10:06:10 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting