[Tue Jun  5 05:40:48 2012] Detection parameters:
  Position = (232.0, 353.9) = 0 22 52.42 1 27 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2642.2 +/- 60.6
  Background counts = 89.5
  Rate = 0.04 +/- 0.0009

[Tue Jun  5 05:40:52 2012] Off-axis axis estimate = 6.27'
[Tue Jun  5 05:46:38 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 05:46:38 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Tue Jun  5 05:46:38 2012] source mask rpix=2.2, npix_max = 29, mask sum = 35, frac = 1.201
[Tue Jun  5 05:46:38 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.56"
[Tue Jun  5 08:19:38 2012] fullrun_pn_xmm0553230201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun  5 08:19:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553230201_pi300-10000_cl_pass0_src3.csv
[Tue Jun  5 08:19:38 2012] fullrun_pn_xmm0553230201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun  5 08:19:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553230201_pi300-10000_cl_pass0_src3.csv
[Tue Jun  5 08:19:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553230201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553230201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 08:19:39 2012] fullrun_pn_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun  5 08:19:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun  5 08:19:39 2012] fullrun_pn_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun  5 08:19:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun  5 08:19:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 10:23:54 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.242634 pixels away
[Tue Jun  5 10:23:55 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 10:23:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 10:23:55 2012] Assessing source extent using major
[Tue Jun  5 10:23:55 2012] Source does appear to be extended
[Tue Jun  5 10:23:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 10:24:37 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 10:24:37 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Tue Jun  5 10:24:37 2012] source mask rpix=2.2, npix_max = 29, mask sum = 35, frac = 1.201
[Tue Jun  5 10:24:37 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.56"
[Tue Jun  5 13:21:42 2012] fullrun_pn_xmm0553230201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun  5 13:21:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553230201_pi300-10000_cl_pass1_src3.csv
[Tue Jun  5 13:21:42 2012] fullrun_pn_xmm0553230201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun  5 13:21:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553230201_pi300-10000_cl_pass1_src3.csv
[Tue Jun  5 13:21:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553230201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553230201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 13:21:43 2012] fullrun_pn_xmm0553230201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun  5 13:21:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553230201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun  5 13:21:43 2012] fullrun_pn_xmm0553230201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun  5 13:21:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0553230201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jun  5 13:21:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0553230201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0553230201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 15:44:50 2012] Spatial fit model total counts = 3302.340000, observed total counts = 2894.000000
[Tue Jun  5 15:44:50 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  5 15:44:50 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 15:44:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 15:44:50 2012] Assessing source extent using major
[Tue Jun  5 15:44:50 2012] Source does appear to be extended
[Tue Jun  5 15:44:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 15:45:29 2012] Counts = 2642.165527, rescaling region sizes by 2.000000
[Tue Jun  5 15:45:29 2012] XMMSAS src. selection expression = ellipse(20138.331589, 30737.764771, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jun  5 15:45:29 2012] Writing source region out to fullrun_pn_xmm0553230201_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun  5 15:45:29 2012] Extracting stamp from image fullrun_pn_xmm0553230201_pi300-10000_cl_sm2.00.img.gz, (157, 279) - (307, 429)
[Tue Jun  5 15:45:29 2012] XMMSAS bgd. selection expression = annulus(20138.331589, 30737.764771, 4350.000000, 8700.000000, X, Y) && !ellipse(24187.677399, 33783.502869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29466.727905, 27688.742401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15874.049616, 26016.585400, 466.909613, 466.909613, 0.000000, X, Y) && !ellipse(27194.862600, 25354.006000, 468.815213, 468.815213, 0.000000, X, Y) && !ellipse(26764.014300, 24772.381600, 383.502411, 330.927210, 63.564000, X, Y) && !ellipse(25262.379800, 24456.090800, 457.083213, 457.083213, 0.000000, X, Y) && !ellipse(18803.365601, 23725.444763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18688.942000, 36284.300000, 984.224028, 354.555210, 315.294000, X, Y) && !ellipse(17509.275116, 39073.170837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26597.578461, 38231.667267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22562.419800, 37391.116852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24318.461487, 37206.528595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.202942, 34865.512268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25702.095490, 34035.000519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15465.391083, 30925.756775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22144.909805, 29729.307648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14185.033737, 27545.307098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18730.996140, 27254.738037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27695.403870, 27031.858948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10692.190697, 26736.662170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22474.081665, 38933.126007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17825.554153, 35878.769684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24833.983215, 34783.907288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22726.328033, 33730.941254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23111.132050, 33155.115845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27602.647766, 31777.859222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24402.362460, 30113.761400, 391.989611, 391.989611, 0.000000, X, Y) && !ellipse(27859.941345, 28484.927277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20700.012200, 27213.974800, 557.596816, 557.596816, 0.000000, X, Y) && !ellipse(22289.935000, 27027.424000, 473.483214, 306.044809, 130.571027, X, Y) && !ellipse(16301.518219, 26991.173279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29483.643097, 26661.386780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26469.329926, 26119.559021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25148.925446, 26022.501770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23091.240570, 24716.965454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20904.907760, 24222.410600, 415.435212, 415.435212, 0.000000, X, Y) && !ellipse(27128.807600, 23871.590400, 307.015209, 307.015209, 0.000000, X, Y) && !ellipse(12564.325531, 23047.836151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23802.676910, 22967.779053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25224.513200, 21979.758000, 1123.984032, 450.949613, 29.414630, X, Y) && !ellipse(18077.809814, 21202.716904, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun  5 15:45:29 2012] Writing fullrun_pn_xmm0553230201_pi300-10000_pass1_cl_src3.gif
[Tue Jun  5 15:50:30 2012] Mean detx,y = (-8304.54, -674.51) 
[Tue Jun  5 15:50:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 15:53:28 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 15:53:28 2012] Setting source spectrum file to fullrun_pn_xmm0553230201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun  5 15:53:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0553230201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun  5 18:01:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  5 18:01:57 2012] rmf not generated due to insufficient counts
[Tue Jun  5 20:47:17 2012] Updating aperture counts using extracted products
[Tue Jun  5 20:47:17 2012] Error reading totcts from fullrun_pn_xmm0553230201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun  5 20:47:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 20:47:22 2012] Using photon index=1.80, rate=0.0385, arf fullrun_pn_xmm0553230201_pi300-10000_pass1_cl_src3.arf
[Tue Jun  5 20:47:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 20:47:23 2012] Updating source flux to 1.6e-13
[Tue Jun  5 20:49:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting