[Tue Jun  5 05:42:14 2012] Detection parameters:
  Position = (366.3, 210.7) = 0 22 13.47 1 16 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.9 +/- 11.9
  Background counts = 25.0
  Rate = 0.002 +/- 0.0003

[Tue Jun  5 05:42:14 2012] Off-axis axis estimate = 8.04'
[Tue Jun  5 08:24:46 2012] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 08:24:46 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Tue Jun  5 08:24:46 2012] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.979
[Tue Jun  5 08:24:46 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 10.45"
[Tue Jun  5 10:23:29 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src29.ximg exists
[Tue Jun  5 10:23:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src29.csv
[Tue Jun  5 10:23:29 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src29_1.ximg exists
[Tue Jun  5 10:23:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src29.csv
[Tue Jun  5 10:23:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 10:23:30 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Tue Jun  5 10:23:30 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Jun  5 10:23:30 2012] Fit fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Jun  5 10:24:12 2012] Spatial fit model total counts = 430.250000, observed total counts = 392.000000
[Tue Jun  5 10:24:12 2012] Offset between fit and detection position for source 57 = 7.580525 pixels
[Tue Jun  5 10:24:12 2012] 416.518800 total counts/ 55.497800 bgd. counts: snr = 48.461247
Spatial fit parameters:
  Offset between fit and detection position for source 57 = 7.580525 pixels
  Position = (373.2, 207.4) = 0 22 11.48 1 16 39.4
  Extent = 20.9 (20.7-41.8)", rotation angle = 0
  Source counts = 361.0 +/- 20.4
  Background counts = 55.5
  Rate = 0.006 +/- 0.0003
[Tue Jun  5 10:24:12 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 10:24:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 10:24:12 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 10:24:12 2012] Source does appear to be extended
[Tue Jun  5 10:24:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 13:28:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun  5 13:28:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun  5 13:28:41 2012] Initial guess for spatial extent in simple fitting = 20.90"
[Tue Jun  5 13:28:41 2012] source mask rpix=4.8, npix_max = 112, mask sum = 78, frac = 0.693
[Tue Jun  5 13:28:41 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 20.90"
[Tue Jun  5 15:44:26 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_src28.ximg exists
[Tue Jun  5 15:44:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_src28.csv
[Tue Jun  5 15:44:26 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Jun  5 15:44:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_src28.csv
[Tue Jun  5 15:44:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 15:44:27 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Jun  5 15:44:27 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Jun  5 15:44:27 2012] Fit fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Jun  5 15:45:08 2012] Warning, spatial fit 28 centroid is now closest to src. 30
[Tue Jun  5 15:45:08 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 15:45:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 15:45:08 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 15:45:08 2012] Source does appear to be extended
[Tue Jun  5 15:45:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 19:33:44 2012] XMMSAS src. selection expression = ellipse(32416.828000, 17997.516000, 1254.102036, 1254.102036, 0.000000, X, Y)
[Tue Jun  5 19:33:44 2012] Writing source region out to fullrun_mos2_xmm0553230201_pi300-10000_pass1_cl_src57_src.reg
[Tue Jun  5 19:33:44 2012] Extracting stamp from image fullrun_mos2_xmm0553230201_pi300-10000_cl_sm2.00.img.gz, (301, 135) - (445, 280)
[Tue Jun  5 19:33:44 2012] XMMSAS bgd. selection expression = annulus(32416.828000, 17997.516000, 2090.170060, 4180.340120, X, Y) && !ellipse(31182.644135, 18749.650375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34977.456268, 21458.563492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32614.437586, 15878.589207, 570.026531, 232.280241, 347.118523, X, Y) && !ellipse(31118.087097, 16051.133026, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun  5 19:33:44 2012] Writing fullrun_mos2_xmm0553230201_pi300-10000_pass1_cl_src57.gif
[Tue Jun  5 19:48:20 2012] Mean detx,y = (-7820.45, -6195.92) 
[Tue Jun  5 19:48:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 19:49:41 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 19:49:41 2012] Setting source spectrum file to fullrun_mos2_xmm0553230201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Jun  5 19:49:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553230201_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Tue Jun  5 20:47:28 2012] Updating aperture counts using extracted products
[Tue Jun  5 20:47:28 2012] Error reading totcts from fullrun_mos2_xmm0553230201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Jun  5 20:47:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 20:47:30 2012] Using photon index=1.80, rate=0.00586, arf fullrun_mos2_xmm0553230201_pi300-10000_pass1_cl_src57.arf
[Tue Jun  5 20:47:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 20:47:30 2012] Updating source flux to 8.7e-14