[Tue Jun  5 05:42:13 2012] Detection parameters:
  Position = (178.2, 355.4) = 0 23 8.05 1 27 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.4 +/- 13.3
  Background counts = 24.9
  Rate = 0.001 +/- 0.0002

[Tue Jun  5 05:42:14 2012] Off-axis axis estimate = 9.65'
[Tue Jun  5 08:24:46 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 08:24:46 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Tue Jun  5 08:24:46 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Tue Jun  5 08:24:46 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 11.25"
[Tue Jun  5 10:23:29 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src37.ximg exists
[Tue Jun  5 10:23:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src37.csv
[Tue Jun  5 10:23:29 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src37_1.ximg exists
[Tue Jun  5 10:23:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src37.csv
[Tue Jun  5 10:23:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 10:23:30 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Tue Jun  5 10:23:30 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Tue Jun  5 10:23:30 2012] Fit fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Tue Jun  5 10:24:12 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 13.582305 pixels away
[Tue Jun  5 10:24:12 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 10:24:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 10:24:12 2012] Assessing source extent using major
[Tue Jun  5 10:24:12 2012] Source does appear to be extended
[Tue Jun  5 10:24:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 13:28:41 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 13:28:41 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Tue Jun  5 13:28:41 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Tue Jun  5 13:28:41 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 11.25"
[Tue Jun  5 15:44:26 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_src35.ximg exists
[Tue Jun  5 15:44:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_src35.csv
[Tue Jun  5 15:44:26 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_src35_1.ximg exists
[Tue Jun  5 15:44:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_src35.csv
[Tue Jun  5 15:44:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 15:44:27 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Tue Jun  5 15:44:27 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Tue Jun  5 15:44:27 2012] Fit fullrun_mos2_xmm0553230201_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Tue Jun  5 15:45:08 2012] Spatial fit model total counts = 312.738000, observed total counts = 313.000000
[Tue Jun  5 15:45:08 2012] Offset between fit and detection position for source 34 = 0.196677 pixels
[Tue Jun  5 15:45:08 2012] 317.668400 total counts/ 271.102000 bgd. counts: snr = 2.828175
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.196677 pixels
  Position = (178.1, 355.6) = 0 23 8.06 1 27 23.8
  Extent = 3.8 (2.9-5.1)", rotation angle = 0
  Source counts = 46.6 +/- 17.8
  Background counts = 271.1
  Rate = 0.0008 +/- 0.0003
[Tue Jun  5 15:45:08 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 15:45:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 15:45:08 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 15:45:08 2012] Source does appear to be extended
[Tue Jun  5 15:45:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 19:33:44 2012] XMMSAS src. selection expression = ellipse(15449.541500, 30886.679600, 227.122207, 227.122207, 0.000000, X, Y)
[Tue Jun  5 19:33:44 2012] Writing source region out to fullrun_mos2_xmm0553230201_pi300-10000_pass1_cl_src34_src.reg
[Tue Jun  5 19:33:44 2012] Extracting stamp from image fullrun_mos2_xmm0553230201_pi300-10000_cl_sm2.00.img.gz, (165, 343) - (191, 369)
[Tue Jun  5 19:33:44 2012] XMMSAS bgd. selection expression = annulus(15449.541500, 30886.679600, 378.537011, 757.074022, X, Y)
[Tue Jun  5 19:33:44 2012] Writing fullrun_mos2_xmm0553230201_pi300-10000_pass1_cl_src34.gif
[Tue Jun  5 19:52:12 2012] Mean detx,y = (12760.21, -1248.49) 
[Tue Jun  5 19:52:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 19:52:28 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 19:52:28 2012] Setting source spectrum file to fullrun_mos2_xmm0553230201_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Tue Jun  5 19:52:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0553230201_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Tue Jun  5 20:41:28 2012] Not generating rmf since there are only 46 counts
[Tue Jun  5 20:41:28 2012] rmf not generated due to insufficient counts
[Tue Jun  5 20:47:28 2012] Updating aperture counts using extracted products
[Tue Jun  5 20:47:28 2012] Error reading totcts from fullrun_mos2_xmm0553230201_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Tue Jun  5 20:47:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 20:47:30 2012] Using photon index=1.80, rate=0.000756, arf fullrun_mos2_xmm0553230201_pi300-10000_pass1_cl_src34.arf
[Tue Jun  5 20:47:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 20:47:30 2012] Updating source flux to 2.5e-14
[Tue Jun  5 20:47:35 2012] Source 34 has fewer than 100.000000 counts, skipping spectral fitting