[Tue Jun  5 05:42:12 2012] Detection parameters:
  Position = (312.7, 400.5) = 0 22 29.02 1 30 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.3 +/- 15.7
  Background counts = 26.5
  Rate = 0.002 +/- 0.0003

[Tue Jun  5 05:42:14 2012] Off-axis axis estimate = 7.47'
[Tue Jun  5 08:24:46 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Tue Jun  5 08:24:46 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Tue Jun  5 08:24:46 2012] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.808
[Tue Jun  5 08:24:46 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 10.16"
[Tue Jun  5 10:23:29 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src21.ximg exists
[Tue Jun  5 10:23:29 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Jun  5 10:23:29 2012] Fit fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_src21 appears to have run properly
[Tue Jun  5 10:23:30 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Jun  5 10:23:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Tue Jun  5 10:23:30 2012] fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Jun  5 10:23:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src21.csv
[Tue Jun  5 10:23:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0553230201_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 10:24:12 2012] Spatial fit model total counts = 388.534000, observed total counts = 364.000000
[Tue Jun  5 10:24:12 2012] Offset between fit and detection position for source 31 = 7.812941 pixels
[Tue Jun  5 10:24:12 2012] Warning, changing simple spatial fit ID from 21 to 18
[Tue Jun  5 10:24:12 2012] 389.930017 total counts/ 389.930000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 7.812941 pixels
  Position = (305.0, 402.0) = 0 22 31.25 1 30 45.8
  Extent = 19.6 (2.5-36.8)", rotation angle = 0
  Source counts = 0.0 +/- 19.7
  Background counts = 389.9
  Rate = 3e-10 +/- 0.0003
  Deleting source due to low Poisson probability